• Stainless Steel Stud Bolts And Nuts Specifications, Stainless Steel Stud Bolts And Nuts, Stainless Steel Stud Bolt Torque Chart, Stainless Steel Stud Bolt Manufacturers and Suppliers India
  • Stainless Steel Stud Bolt

    Stainless Steel Stud Bolt Manufacturers in Mumbai India

    Stainless Steel Stud Bolts And Nuts Specifications, Stainless Steel Stud Bolts And Nuts, Stainless Steel Stud Bolt Torque Chart, Stainless Steel Stud Bolt Manufacturers, ASTM A193 B7, B7M B16, B8, B8M, B8T, A320 L7, L43 Stainless Steel Stud Bolts

    Stainless Steel 304 Stud Bolts, 316l Stainless Steel Stud Bolts, M16 Stainless Steel Stud Bolts, Stainless Steel Stud Bolt Right And Left Hand Dual Thread, Stud Bolts For Stainless Steel Flanges, Stainless Steel Stud Bolt Material, Stainless Steel Stud Bolt Specification, 316 Stainless Steel Stud Bolts | Dimensions | Specifications | Stainless Steel Fasteners Data | Diameters | Size | Fasteners Weight Calculator | Price in India

    Manufacturing, stocking and distributing petro-chemical grade studbolt assemblies and fasteners. Stocking petro-chemical studbolts to PED where specified. Materials - ASTM A193 B7, B7M B16, B8, B8M, B8T, A320 L7, L43. Plating includes PTFE, Xylan, Xylar, Sermagard, Cadmium, Zinc .

    These are the basic elements to build any type of structure; for decades, Raaj Sagar has been dealing with the technological problems that are connected with the relevant manufacturing activity. Stud bolts manufactured by Raaj Sagar are suitable for the most varied needs and are made with any type of material, from the the smallest (5/16” or M6) to the largest diameters (7” or M180).

    Stainless Steel Stud Bolt Specification

    Specification Material Nominal Size (In.) Mechanical Properties
    Minimum Tempering
    Temperature
    °F
    Elongation
    in 4D,
    min, %
    Yield Strength,
    min, 0.2 %
    offset,
    ksi
    Tensile
    Strength,
    min, ksi
    Reduction
    of Area,
    min, %
    Hardness,
    max
    Finish
    Treatment
    ASTM A193
    Grade B7
    AISI 4140, 4142, 4105 1/2 to 2-1/2 1100 16 105 125 50 321HB
    or 35HRC
    Black Oxide
    Zinc Plated
    Nickel Plated
    Phosphated
    HDG
    Dacromet
    Cadmium Plated
    PTFE(Teflon)
    2-1/2 to 4 95 115
    ASTM A193
    Grade B7M
    AISI 4140, 4142, 4105 1/2 to 4 1150 18 80 100 235HB or 99HRB
    ASTM A193
    Grade B16
    CrMoVa Alloy Steel 1/2 to 2-1/2 1200 18 105 125 50 321HB or 35HRC
    2-1/2 to 4 17 95 110 45
    Specification Material Nominal Size (In.) Minimum Tempering 
    Temperature °F
    Proof Load Stress (ksi) Hardness Rockwell Nut Type
    Min Max
    ASTM A194 Grade 2H Medium Carbon Steel, Quenched and Tempered 1/2 to 4 850 175 C24 C35 Heavy hex nut
    Hex thin nut
    Hex nut
    ASTM A194 Grade 2HM Medium Carbon Steel, Quenched and Tempered 1/2 to 4 1150 150 159 235
    ASTM A194 Grade 4 Medium Carbon Alloy Steel, Quenched and Tempered 1/2 to 4 1100 175 C24 C35
    ASTM A194 Grade 7 Medium Carbon Alloy Steel, Quenched and Tempered 1/2 to 4 1100 175 C24 C35
    ASTM A194 Grade 7M Medium Carbon Alloy Steel, Quenched and Tempered 1/2 to 4 1150 150 159 235

    We supply Stainless Steel 304 & 316 Stud Bolts at best price..Our 304 & 316 Stainless Steel Fasteners plant is equipped with various testing facilities like Tensile Testing Machine also known as tension testing. We also conduct other tests like Hardness Test, IGC Test, Positive Material Identification Test to ensure that all the product going out of our manufacturing plant are the best in terms of quality.

    Stainless Steel 304 & 316 Stud Bolts Specification :

    Material
    Size
    Standards
    Length
    Specification
    Manufacturer

    Stainless Steel 304 & 316 Stud Bolts

     

    M02 to M33

    ASTM / ASME - A/ SA 193 / 193

    3 mm
    to 
    200 mm

    IS

    BS

    ASTM

    GKW

    Unbrako

    Kundan

    APL

    Sundaram Precision

    EBY Fastener Etc.

    Packing: IN BULK :canton/pallet, Small Boxs/carton/ pallet, or customer request
    Origin and service-region: European

    Origin of Stainless Steel 304 Stud Bolts are Western European. However projects with eastern origin are possible on request.

    TEST CERTIFICATE Manufacturer Test Certificate as per EN 10204 / 3.1
    Product Grades: 304, 304L, 316, 316L, 316Ti, 200 series

    Property Class :

    For Bolts & Screws: A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H

    For Nuts: A2-70, A2-80, A4-70, A4-80, F594C, F594D, F594G, F594H, A2-035, A4-040

    For SHCS: F837B, F837C, F837E, F837

    For Threaded Rods: A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H, B8, B8M CL1 & CL2

    Grade Designation :

    AISI Grade Equivalent
    JIS Equivalent
    Stainless Steel Notation
    EN/DIN Numerical Equivalent
    UNS
    designation
    EN/DIN Symbolical Equivalent
    AISI 304
    SUS304
    SS 304
    EN 1.4301
    UNS S30400
    X4CrNi18-10
    AISI 304L
    SUS304L
    SS 304L
    EN 1..4307
    UNS S30403
    X2CrNi18-9
    AISI 304LN
    SUS304 LN
    SS 304 LN
    EN 1.4311
    UNS S30453
    X2CrNiN18-10

    Stainless Steel 304 Stud Bolts Composition :

    Chemical Composition 
    Typical compositional ranges for grade Stainless Steel 304 Stud Bolts

    Grade
    C
    Mn
    Si
    P
    S
    Cr
    Mo
    Ni
    N
    304
    min.

    max.

    -

    0.08

    -

    2.0

    -

    0.75

    -

    0.045

    -

    0.030

    18.0

    20.0

    -
    8.0

    10.5

    -

    0.10

    304L
    min.

    max.

    -

    0.030

    -

    2.0

    -

    0.75

    -

    0.045

    -

    0.030

    18.0

    20.0

    -
    8.0

    12.0

    -

    0.10

    304H
    min.

    max.

    0.04

    0.10

    -

    2.0

    -

    0.75

    -0.045
    -

    0.030

    18.0

    20.0

    -
    8.0

    10.5

    -

    Mechanical Properties 
    Typical mechanical properties for grade Stainless Steel 304 Stud Bolts

    Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
    Rockwell B (HR B) max Brinell (HB) max

    304

    515

    205

    40

    92

    201

    304L

    485

    170

    40

    92

    201

    304H

    515

    205

    40

    92

    201

    304H also has a requirement for a grain size of ASTM No 7 or coarser.

    Physical Properties 
    Typical physical properties for annealed grade Stainless Steel 304 Stud Bolts

    Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/°C) Thermal Conductivity (W/m.K) Specific Heat 0-100°C (J/kg.K) Electrical Resistivity

    (n.m)

    0-100°C 0-315°C 0-538°C at 100°C at 500°C

    304/L/H

    8000

    193

    17.2

    17.8

    18.4

    16.2

    21.5

    500

    720

     

    316 Stainless Steel Stud Bolt, ASTM A193 Stainless Steel 316 Stud Bolt, High Tensile Stud Bolts Manufacturers & Suppliers In India.

    Grade Designation :

    Grade

    UNS
    No

    Old British

    Euronorm

    Swedish
    SS

    Japanese
    JIS

    BS

    En

    No

    Name

    316

    S31600

    316S31

    58H, 58J

    1.4401

    X5CrNiMo17-12-2

    2347

    SUS 316

    316L

    S31603

    316S11

    -

    1.4404

    X2CrNiMo17-12-2

    2348

    SUS 316L

    316H

    S31609

    316S51

    -

    -

    -

    -

    -

    316 Stainless Steel Stud Bolt Composition :

    Chemical Composition 
    Typical Chemical compositional ranges for grade 316 Stainless Steel Stud Bolt

    Grade

    C

    Mn

    Si

    P

    S

    Cr

    Mo

    Ni

    N

    316

    Min

    -

    -

    -

    0

    -

    16.0

    2.00

    10.0

    -

    Max

    0.08

    2.0

    0.75

    0.045

    0.03

    18.0

    3.00

    14.0

    0.10

    316L

    Min

    -

    -

    -

    -

    -

    16.0

    2.00

    10.0

    -

    Max

    0.03

    2.0

    0.75

    0.045

    0.03

    18.0

    3.00

    14.0

    0.10

    316H

    Min

    0.04

    0.04

    0

    -

    -

    16.0

    2.00

    10.0

    -

    max

    0.10

    0.10

    0.75

    0.045

    0.03

    18.0

    3.00

    14.0

    -

    Mechanical Properties 
    Typical mechanical properties for grade 316 Stainless Steel Stud Bolt

    Grade

    Tensile Str
    (MPa) min

    Yield Str
    0.2% Proof
    (MPa) min

    Elong
    (% in 50mm) min

    Hardness

    Rockwell B (HR B) max

    Brinell (HB) max

    316

    515

    205

    40

    95

    217

    316L

    485

    170

    40

    95

    217

    316H

    515

    205

    40

    95

    217

    Physical Properties 
    Typical physical properties for grade 316 Stainless Steel Stud Bolt

    Grade

    Density
    (kg/m3)

    Elastic Modulus
    (GPa)

    Mean Co-eff of Thermal Expansion (µm/m/°C)

    Thermal Conductivity
    (W/m.K)

    Specific Heat 0-100°C
    (J/kg.K)

    Elec Resistivity
    (nΩ.m)

    0-100°C

    0-315°C

    0-538°C

    At 100°C

    At 500°C

    316/L/H

    8000

    193

    15.9

    16.2

    17.5

    16.3

    21.5

    500

    740

    Stainless Steel 304 & 316 Stud Bolts Surface Coating :

    • Hot Dipped Galvanizing
    • Epoxy Coating
    • Electro Polished
    • Passivation
    • Zinc Plating
    • Chrome Plating
    • Mirror Buffed
    • Teflon Coating
    • Oxidized

    ASTM (American Society for Testing and Materials)

    A group of scientists and engineers formed the American Society for Testing and Materialsin 1898.
    ASTM International (ASTM), is an international standards organization that develops and publishes voluntary consensus technical standards for a wide range of materials, products, systems, and services
    ASTM predates other standards organizations such as (1901), DIN (1917) and AFNOR (1926), but differs from these in that it is not a national standards body.

    MATERIALS-STUDBOLTS
    High temperature 
    service 
    ASTM A193 

    ASTM A193 / A193M Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications

    ASTM MATERIAL SUMMARY FOR BOLTS

    American Society for Testing and Materials (ASTM), Alloy Steel Bolt Materials Specifications:

    ASTM A307 Grade B7-Chromium-Molybdenum Steel
    ASTM A193 Grade B7M-Reduced tensile strength, hardness controlled to 235 Brinell max.
    ASTM A193 Grade B16-vanadium Steel
    ASTM A320 Grade L7-Designed for low temperature applications
    ASTM A320 Grade L7M-Reduced tensile strength, hardness controlled to 235 Brinell max.
    ASTM A193 Grade B8-Chromium-Nickel austnitic steel- 304 Stainless
    ASTM A193 Grade B8M- Chromium-Nickel Molybdenum austnitic steel- 316 Stainless

    American Society for Testing and Materials (ASTM), Alloy & Carbon Steel Nut Materials Specifications:

    ASTM A194 Grade A- Low Carbon, Non-Heat Treat, Heavy Pattern
    ASTM A194 Grade C- Recommended use with A325 Structural Bolts, Lock Nut Spec.
    ASTM A194 Grade GT- Automation Flange Lock Nut, C1022-1045 SteelGrade 2- Low Carbon, Non- Heat Treat, Finished Pattern
    ASTM A194 Grade 2H-Recommended use with A325 Structural Bolts, High Pressure & High Temp.
    ASTM A194 Grade 2HM-Grade 5-
    ASTM A194 Grade DH- Recommended use with A490 Type 1 Structural Bolts
    ASTM Grade DH3- Recommended use with A490 Type 3 Structural BoltsGrade 8-
    ASTM A194 Grade F- Large Flange Nut, AISI 1008-1035 steel
    ASTM A194 Grade 4-
    ASTM A194 Grade L7-ASTM A194 Grade L7M-Stainless Steel-
    ASTM A194 Grade 8-Series Stainless Steel, Heavy Pattern 
    ASTM A194 Grade 8M- 316 Series Stainless Steel, Heavy Pattern


    Low temperature
    service 
    ASTM A320

    ASTM A320 / A320M Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service

    MATERIALS-STUDBOLTS ASTM A320

    ASTM A320 specification covers alloy steel bolting materials for pressure vessels, valves, flanges, and fittings for low-temperature service. Each alloy shall conform to the prescribed chemical composition requirements. The material, as represented by the tension specimens, shall conform to the requirements as to tensile properties such as tensile strength, yield strength, elongation, and hardness. The material shall meet the prescribed impact energy absorption requirements and the recommended test temperature. According to ASTM A320 mechanical tests shall be conducted on the material, namely: impact testing, tension testing, and hardness testing.
    Inside ASTM A320 several grades are covered, including both ferritic and austenitic steels designated L7, B8, etc. Selection will depend on design, service conditions, mechanical properties, and low-temperature characteristics
    The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. Like the ASTM A193 specification, unless otherwise specified, the 8UN thread series is specified on fastener larger than 1 " in diameter.

    Low temperature service 

    ASTM A320 L7 Alloy steel, AISI 4140/4142 Quenched and tempered 
    ASTM A320 L7M
    ASTM A320 L43 
    Alloy steel, AISI 4340 Quenched and tempered 
    ASTM A320 B8 
    Class 1 Stainless steel, AISI 304, carbide solution treated 
    ASTM A320 B8A
    ASTM A320 B8T
    ASTM A320 B8TA
    ASTM A320 B8C
    ASTM A320 B8M 
    Class 1 Stainless steel, AISI 316, carbide solution treated 
    ASTM A320 B8MA
    ASTM A320 B8cl2 
    Stainless steel, AISI 304, carbide solution treated, strain hardened 
    ASTM A320 B8Mcl2 
    Stainless steel, AISI 316, carbide solution treated, strain hardened 


    MATERIALS- HEX NUTS


    High /Low temperature service 
    ASTM A194 ASTM A194 / A194M - 09 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both.

    MATERIALS - HEX NUTS ASTM A194


    ASTM A194 pecification covers a variety of carbon, alloy, and martensitic and austenitic stainless steel nuts. These nuts are intended for high-pressure or high-temperature service, or both. Bars from which the nuts are made shall be hot-wrought.
    According to ASTM A194 the material may be further processed by centerless grinding or by cold drawing. Austenitic stainless steel may be solution annealed or annealed and strain-hardened. Each alloy shall conform to the chemical composition requirements prescribed. Hardness tests, proof of load tests, and cone proof load tests shall be made to all nuts to meet the requirements specified.
    ASTM A194 stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. Within the text, the SI units are shown in brackets.
    ASTM A194 covers size range 1 / 4 " through 4 in. and metric M6 through M100 nominal. It also covers austenitic stainless steel nuts in the size range 1 / 4 " in. and M6 nominal and above.
    Unless otherwise specified, the American National Standard Heavy Hex Series (ANSI B 18.2.2) shall be used. Nuts up to and including 1 inch nominal size shall be UNC Series Class 2B fit. Nuts over 1 inch nominal size shall be either UNC Series Class 2B fit or 8 UN Series Class 2B fit. High strength ASTM A194 grade 2H nuts are common in the marketplace.

    High /Low temperature service 

    ASTM A194 2H Quenched & tempered carbon steel heavy hex nuts
    ASTM A194 2HM Quenched & tempered carbon steel heavy hex nuts
    ASTM A194 4
    Quenched & tempered carbon-molybdenum heavy hex nuts
    ASTM A194 3
    ASTM A194 6
    ASTM A194 7
    Quenched & tempered alloy steel heavy hex nuts
    ASTM A194 7M
    Quenched & tempered alloy steel heavy hex nuts
    ASTM A194 8
    Stainless AISI 304 heavy hex nuts
    ASTM A194 8A
    ASTM A194 8M
    Stainless AISI 316 heavy hex nuts
    ASTM A194 8MA
    ASTM A194 8C
    ASTM A194 8T


    MATERIALS- STUDBOLT/HEX NUTS

    High Temperature
    Resistant alloy
    ASTM A453

    ASTM A453 / A453M Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels

    MATERIALS-STUDBOLTS/NUTS ASTM A453

    ASTM A453 specification covers standards for Grade 660 (Class A, B, C, and D) , Grade 651 (Class A and B), Grade 662 (Class A and B), and Grade 665 (Class A and B) of bolting materials,with ten classes of yield strength ranging from 50 to 120 ksi [345 to 827 MPa], for use in high-temperature service such as fasteners, for pressure vessels and valve flanges. Bolting materials in ASTM A453 are covered rolled, forged, or hot-extruded bars, and also bolts, nuts, screws, washers, studs, and stud bolts.
    Materials shall adhere to specified contents of carbon, manganese, phosphorus, sulfur, silicon, nickel, chromium, molybdenum, tungsten, titanium, columbium, aluminum, vanadium, boron, and copper.According to ASTM A453 materials shall be subjected to tension, stress-rupture, and hardness tests. Materials shall conform to yield strength, tensile strength, elongation, reduction of area, Brinell hardness, and Rockwell hardness requirements. Hardening and solution treatment requirements for each material class are also given.

    High Temperature
    Resistant alloy

    ASTM A453 660A
    ASTM A453 660B
    ASTM A453 660C
    ASTM A453 660D


    High Temperature
    Resistant alloy
    ASTM A182

    ASTM A182 / A182M  Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

    MATERIALS-STUDBOLTS/HEX NUTS ASTM A182

    ASTM A182 specification covers forged or rolled alloy and stainless steel pipe flanges, forged fittings, and valves and parts for high-temperature service for use in pressure systems. Included are similar parts to specified dimensions or to dimensional standards, such as the ASME specifications that are referenced in Section Several grades of low alloy steels and ferritic, martensitic, austenitic, and ferritic-austenitic stainless steels are included in this specification. Selection will depend upon design and service requirements. 
    In ASTM A182 the values stated in either inch-pound units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification


    Duplex/Super duplex

    ASTM A182 F51 solution thread and quench
    ASTM A182 F44 solution thread and quench
    ASTM A182 F53 solution thread and quench
    ASTM A182 F55 solution thread and quench

    Compleate Information About Stainless Steel Stud Bolt Dimensions | SS Stud Bolts

    THE RANGE OF MACHINERY AND SPECIALIST MANUFACTURING PROCESSES INCLUDE:

    CNCs:

    • Lathes
    • Machining centres
    • Twin spindle multi axis

    HEAD FORMING:

    • Hot forging
    • Single die – two blow cold forming
    • Multi-station cold forming

    THREADING:

    • Flat die rolling
    • Circular die annular rolling
    • Circular die plunge rolling
    • Single point screw cutting

    GENERAL:

    • Turning – capstans
    • Milling – conventional & Tornomat
    • Drilling
    • Tapping
    • Presswork
    • Assembly
    • Automatic saws
    • Centreless grinding
    • Vertical boring
    • Horizontal boring
    • Semi-automatic lathes

    MANUFACTURING CAPACITY RANGES FROM:

    FASTENERS

    • M1.6 (1⁄16” dia) to M180 (7” dia) in any length

    PIPE, FLANGES & FITTINGS

    • Up to 48″ NB
    Types of Nuts
    • Stainless Steel Nut Bolt
    • Stainless Steel Hex Nuts
    • Stainless Steel Hex machine screw nuts
    • Stainless Steel Hex lock nuts nylon insert
    • Stainless Steel Hex jam nuts
    • Stainless Steel Hex jam nylon lock nuts
    • Stainless Steel Heavy hex nuts
    • Stainless Steel Wing nuts
    • Stainless Steel Cap nuts
    • Stainless Steel Acorn nuts
    • Stainless Steel Square nuts
    • Stainless Steel K-Lock nuts
    • Stainless Steel Prevailing torque lock nuts
    • Stainless Steel Top lock nuts
    • Stainless Steel Two-way reversible lock nuts
    • Stainless Steel Pin-Lock nuts
    • Stainless Steel T-Nuts
    • Stainless Steel Coupling nuts
    • Stainless Steel Slotted nuts
    • Stainless Steel Castle nuts
    • Stainless Steel Flange nuts serrated
    • Stainless Steel Metric nuts
    • Stainless Steel Machine Hex Nuts
    • Stainless Steel Finished Hex Nuts
    • Stainless Steel Forged Eye Nut
    • Stainless Steel Rivet Nuts
    • Stainless Steel Slotted Hex Nut
    • Stainless Steel ACME Hex Nuts
    • Stainless Steel Nylock Nuts
    • Stainless Steel Anco Locknuts
    • Stainless Steel Flexloc Nuts
    • Stainless Steel Reversible Locknuts
    • Stainless Steel Panel Nut
    • Stainless Steel Poly Nut
    • Stainless Steel Conelock Nut
    • Stainless Steel Self Clinching Nuts
    • Stainless Steel Domed Cap Nuts
    • Stainless Steel Imperial Thread Nuts
    • Stainless Steel Imperial Thread Nylock Nuts
    • Stainless Steel Sleeve Nuts
    • Stainless Steel Thin Nuts
    • Stainless Steel Weld Nuts
    • Stainless Steel High Nuts
    • Stainless Steel Cage Nuts
    • Stainless Steel Security Nuts
    • Stainless Steel Imperial Nuts
    • Stainless Steel Industrial Nuts
    • Stainless Steel Miscellaneous Nuts
    Types of Bolts
    1. Stainless Steel Eye Bolt
    2. Stainless Steel Eye Bolt With Shoulder
    3. Stainless Steel Eye Bolt No Shoulder
    4. Stainless Steel Turned Eye Bolts
    5. Stainless Steel Screw Thread Eye Bolt
    6. Stainless Steel U-bolts
    7. Stainless Steel Square U-bolts
    8. Stainless Steel Lag Bolts
    9. Stainless Steel Bolts and nuts
    10. Stainless Steel Serrated Flange Bolts
    11. Stainless Steel Hex Head Bolts
    12. Stainless Steel All Thread Studs
    1. Stainless Steel Button Head Bolts
    2. Stainless Steel Heavy Hex Bolts
    3. Stainless Steel Square Head Bolts
    4. Stainless Steel 12-Point Flange Bolts
    5. Stainless Steel Timber Bolts
    6. Stainless Steel Jack Bolts
    7. Stainless Steel Bent Bolts
    8. Stainless Steel Allen Bolt
    9. Stainless Steel Long Bolt
    10. Stainless Steel Carriage Bolts
    11. Stainless Steel Tap Studs
    1. Stainless Steel Elevator Bolts
    2. Stainless Steel Hanger Bolts
    3. Stainless Steel Hex Machine Bolts
    4. Stainless Steel Hex Tap Bolts
    5. Stainless Steel Metric Bolts
    6. Stainless Steel Plow Bolts
    7. Stainless Steel Square Head Machine Bolts
    8. Stainless Steel Step Bolts
    9. Stainless Steel Structural Bolts
    10. Stainless Steel Hex Flange Bolt
    1. Stainless Steel Tee-Hammer Head Bolt
    2. Stainless Steel Security Anti Theft Bolts
    3. Stainless Steel Hex Head Bolt With Plain Spring Washer
    4. Stainless Steel High Strength Structural Bolts
    5. Stainless Steel Hexagon Bolts for Steel Structures
    6. Stainless Steel Step Bolts for Steel Structures
    7. Stainless Steel Stud bolts
    8. Stainless Steel Double end studs
    Types of Screw
    • Stainless Steel Self Drilling Screw
    • Stainless Steel Self Tapping Screw
    • Stainless Steel Thread Rolling Screw
    • Stainless Steel Thread Cutting Screw
    • Stainless Steel Machine Screw
    • Stainless Steel Concrete Screw
    • Stainless Steel Roofing Screw
    • Stainless Steel Drywall Screw
    • Stainless Steel Particle Board Screw
    • Stainless Steel Chipboard Screw
    • Stainless Steel Construction screws
    • Stainless Steel Coach screws / Lag screw
    • Stainless Steel Wood Screw
    • Stainless Steel Euro Screw
    • Stainless Steel Collated Screw
    • Stainless Steel Furniture Screw
    • Stainless Steel Sems Screw
    • Stainless Steel Stainless Steel Screw
    • Stainless Steel SS Screws
    • Stainless Steel Thumb & Wing Screws
    • Stainless Steel Cap Screws
    • Stainless Steel Phillips Head Screw
    • Stainless Steel Set screws
    • Stainless Steel Metric set screws
    • Stainless Steel Sheet metal screws
    • Stainless Steel Eye screw
    • Stainless Steel Security head screw
    Types of Washer
    • Stainless Steel Belleville Washer
    • Stainless Steel Bond Sealing Washer
    • Stainless Steel Counter Sunk Finishing Washer
    • Stainless Steel Dock Washer
    • Stainless Steel Fender Washer
    • Stainless Steel Flat Washer
    • Stainless Steel Lock Washer
    • Stainless Steel Neoprene Washer
    • Stainless Steel Square Bevel Washer
    • Stainless Steel Star Washer

     


    If you don’t see what you’re looking for just call one of our team members at +91-22-6659 5285 Or Mail Us inquiry@raajsagarsteels.com. No inquiry is too large or too small, we specialize in locating hard to find items. If you do see what you are looking, we would love to assist you and give you a quote today!

    24 Hrs. Online Whatsapp Number   Contact Person: Mr. Milap Mehta - Cell: +91-9869 532 584

    STUD BOLTS Ready Stock

    Our Overseas Sales Distributors

    Stud Bolts Suppliers In Uae
    Stud Bolts Suppliers In Mumbai
    Stud Bolts Suppliers In India
    Stud Bolts Suppliers In Dubai
    Stud Bolts Suppliers In Kuwait
    Stud Bolts Suppliers Usa
    Stud Bolts Suppliers Uk
    Stud Bolts Supplier In Uae
    Stud Bolt Suppliers In Abu Dhabi
    Stud Bolt Supplier Malaysia
    Stud Bolt & Nut Suppliers
    Stud Bolts Nuts Manufacturers
    Stud Bolt Supplier Philippines
    Stud Bolt Suppliers Perth
    Stud Bolt Supplier In Qatar
    Stud Bolt Supplier In Malaysia
    Stud Bolt Supplier In Kuwait
    Stud Bolt Supplier In Singapore
    Stud Bolt Supplier Thailand


    Quick Enquiry