• sch 80 ss pipe size and price | stainless steel pipe schedule 80 | sch 80 ss pipe sizes in Inches | sch 80 ss pipe sizes in mm
  • sch 80 ss pipe | stainless steel pipe schedule 80 | sch 80 ss pipe sizes in Inches | sch 80 ss pipe sizes in mm

    DOWNLOAD PDF :: SS Chemical Mechanical Properties | ANSI ASME 36.19M Stainless Steel Pipe | SS Chemical Mechanical Properties | Stainless Steel Pipes Dimension | Stainless Steel Pipes Sizes

    SCHEDULE 80 STAINLESS STEEL PIPE T-304/304L : View In Inches

    0.25" NOM. (0.54" OD X 0.12" WALL X 0.302" ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 0.25" (0.54" OD x 0.12" Wall x 0.302" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 0.5453 pounds
    Dimension Name Value
    Nominal 0.25"
    OD 0.54"
    Wall Thickness 0.12"
    ID 0.302"
    Available Sizes
      Random Length (10"-12") - $15.82
      One Ft. (12") Length - Price : $17.57
      Two Ft. (24") Length - Price : $33.72
      Three Ft. (36") Length - Price : $47.41
      Four Ft. (48") Length - Price : $56.18
      Five Ft. (60") Length - Price : $66.72
      Six Ft. (72") Length - Price : $77.96
      Seven Ft. (84") Length - Price : $88.48
      Eight Ft. (96" Length) - Price : $98.32

      Technical Information

        Weight/Lineal Foot
        0.5453 pounds
        Material Specifications

        This material meets the following specs:
        ASME SA312

        This material meets the following specs:
        ASTM A312

        Theoretical Bursting Pressure

        33056 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 8264 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

         
        Chemistry Information: 304 Stainless
        Element Percentage
        C 0.08 max
        Cr 18 - 20
        Fe 66.345 - 74
        Mn 2 max
        Ni 8 - 10.5
        P 0.045 max
        S 0.03 max
        Si 1 max

        Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    0.375" NOM. (0.68" OD X 0.13" WALL X 0.423" ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 0.375" (0.68" OD x 0.13" Wall x 0.423" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 0.7736 pounds
    Dimension Name Value
    Nominal 0.375"
    OD 0.68"
    Wall Thickness 0.13"
    ID 0.423"
    Available Sizes
      Random Length (10"-12") - $18.21
      One Ft. (12") Length - Price : $20.25
      Two Ft. (24") Length - Price : $38.86
      Three Ft. (36") Length - Price : $54.67
      Four Ft. (48") Length - Price : $64.76
      Five Ft. (60") Length - Price : $76.92
      Six Ft. (72") Length - Price : $89.87
      Seven Ft. (84") Length - Price : $102.03
      Eight Ft. (96" Length) - Price : $102.01

    Technical Information

      Weight/Lineal Foot
      0.7736 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      28000 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 7000 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.


    0.5" NOM. (0.84" OD X 0.15" WALL X 0.546" ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 0.5" (0.84" OD x 0.15" Wall x 0.546" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 1.1199 pounds
    Dimension Name Value
    Nominal 0.5"
    OD 0.84"
    Wall Thickness 0.15"
    ID 0.546"
    Available Sizes
      Random Length (10"-12") - $11.90
      One Ft. (12") Length - Price : $13.22
      Two Ft. (24") Length - Price : $25.40
      Three Ft. (36") Length - Price : $35.70
      Four Ft. (48") Length - Price : $42.31
      Five Ft. (60") Length - Price : $50.25
      Six Ft. (72") Length - Price : $58.73
      Seven Ft. (84") Length - Price : $66.65
      Eight Ft. (96" Length) - Price : $74.06

    Technical Information

      Weight/Lineal Foot
      1.1199 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      26250 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 6562.5 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    0.75" NOM. (1.05" OD X 0.15" WALL X 0.742" ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 0.75" (1.05" OD x 0.15" Wall x 0.742" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 1.4607 pounds
    Dimension Name Value
    Nominal 0.75"
    OD 1.05"
    Wall Thickness 0.15"
    ID 0.742"
    Available Sizes
      Random Length (10"-12") - $17.58
      One Ft. (12") Length - Price : $19.52
      Two Ft. (24") Length - Price : $37.48
      Three Ft. (36") Length - Price : $52.71
      Four Ft. (48") Length - Price : $62.48
      Five Ft. (60") Length - Price : $74.18
      Six Ft. (72") Length - Price : $86.68
      Seven Ft. (84") Length - Price : $98.40
      Eight Ft. (96" Length) - Price : $98.39

    Technical Information

      Weight/Lineal Foot
      1.4607 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      22000 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 5500 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    1" NOM. (1.32" OD X 0.18" WALL X 0.957" ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 1" (1.32" OD x 0.18" Wall x 0.957" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 2.2202 pounds
    Dimension Name Value
    Nominal 1"
    OD 1.32"
    Wall Thickness 0.18"
    ID 0.957"
    Available Sizes
      Random Length (10"-12") - $16.59
      One Ft. (12") Length - Price : $18.42
      Two Ft. (24") Length - Price : $35.35
      Three Ft. (36") Length - Price : $49.74
      Four Ft. (48") Length - Price : $58.94
      Five Ft. (60") Length - Price : $70.01
      Six Ft. (72") Length - Price : $81.79
      Seven Ft. (84") Length - Price : $92.84
      Eight Ft. (96" Length) - Price : $103.16

    Technical Information

      Weight/Lineal Foot
      2.2202 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      20418 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 5104.5 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    1.25" NOM. (1.66" OD X 0.19" WALL X 1.278" ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 1.25" (1.66" OD x 0.19" Wall x 1.278" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 3.022 pounds
    Dimension Name Value
    Nominal 1.25"
    OD 1.66"
    Wall Thickness 0.19"
    ID 1.278"
    Available Sizes
      Random Length (10"-12") - $22.86
      One Ft. (12") Length - Price : $25.42
      Two Ft. (24") Length - Price : $48.80
      Three Ft. (36") Length - Price : $68.62
      Four Ft. (48") Length - Price : $81.34
      Five Ft. (60") Length - Price : $96.58
      Six Ft. (72") Length - Price : $101.56
      Seven Ft. (84") Length - Price : $115.28
      Eight Ft. (96" Length) - Price : $128.08

    Technical Information

      Weight/Lineal Foot
      3.022 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      17259 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 4314.75 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    1.5" NOM. (1.9" OD X 0.2" WALL X 1.5" ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 1.5" (1.9" OD x 0.2" Wall x 1.5" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 3.6788 pounds
    Dimension Name Value
    Nominal 1.5"
    OD 1.9"
    Wall Thickness 0.2"
    ID 1.5"
    Available Sizes
      Random Length (10"-12") - $25.12
      One Ft. (12") Length - Price : $27.92
      Two Ft. (24") Length - Price : $53.61
      Three Ft. (36") Length - Price : $75.38
      Four Ft. (48") Length - Price : $89.34
      Five Ft. (60") Length - Price : $106.09
      Six Ft. (72") Length - Price : $111.56
      Seven Ft. (84") Length - Price : $126.65
      Eight Ft. (96" Length) - Price : $140.70

    Technical Information

      Weight/Lineal Foot
      3.6788 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      15789 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 3947.25 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    2" NOM. (2.38" OD X 0.22" WALL X 1.939" ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 2" (2.38" OD x 0.22" Wall x 1.939" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 5.1416 pounds
    Dimension Name Value
    Nominal 2"
    OD 2.38"
    Wall Thickness 0.22"
    ID 1.939"
    Available Sizes
      Random Length (10"-12") - $35.78
      One Ft. (12") Length - Price : $39.74
      Two Ft. (24") Length - Price : $76.32
      Three Ft. (36") Length - Price : $107.32
      Four Ft. (48") Length - Price : $114.48
      Five Ft. (60") Length - Price : $135.94
      Six Ft. (72") Length - Price : $158.85
      Seven Ft. (84") Length - Price : $180.30
      Eight Ft. (96" Length) - Price : $194.50

    Technical Information

      Weight/Lineal Foot
      5.1416 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      13768 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 3442 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    2.5" NOM. (2.88" OD X 0.28" WALL X 2.323" ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 2.5" (2.88" OD x 0.28" Wall x 2.323" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 7.8769 pounds
    Dimension Name Value
    Nominal 2.5"
    OD 2.88"
    Wall Thickness 0.28"
    ID 2.323"
    Available Sizes
      Random Length (10"-12") - $70.26
      One Ft. (12") Length - Price : $78.07
      Two Ft. (24") Length - Price : $134.92
      Three Ft. (36") Length - Price : $189.71
      Four Ft. (48") Length - Price : $205.78
      Five Ft. (60") Length - Price : $244.37
      Six Ft. (72") Length - Price : $285.52
      Seven Ft. (84") Length - Price : $324.10
      Eight Ft. (96" Length) - Price : $360.11

    Technical Information

      Weight/Lineal Foot
      7.8769 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      14400 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 3600 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    3" NOM. (3.5" OD X 0.3" WALL X 2.9" ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 3" (3.5" OD x 0.3" Wall x 2.9" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 10.3871 pounds
    Dimension Name Value
    Nominal 3"
    OD 3.5"
    Wall Thickness 0.3"
    ID 2.9"
    Available Sizes
      Random Length (10"-12") - $76.50
      One Ft. (12") Length - Price : $85.00
      Two Ft. (24") Length - Price : $146.89
      Three Ft. (36") Length - Price : $196.61
      Four Ft. (48") Length - Price : $224.07
      Five Ft. (60") Length - Price : $266.08
      Six Ft. (72") Length - Price : $310.91
      Seven Ft. (84") Length - Price : $352.91
      Eight Ft. (96" Length) - Price : $392.10

    Technical Information

      Weight/Lineal Foot
      10.3871 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      12857 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 3214.25 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    3.5" NOM. (4" OD X 0.32" WALL X 3.364" ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 3.5" (4" OD x 0.32" Wall x 3.364" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 12.741 pounds
    Dimension Name Value
    Nominal 3.5"
    OD 4"
    Wall Thickness 0.32"
    ID 3.364"
    Available Sizes
      Random Length (10"-12") - $97.41
      One Ft. (12") Length - Price : $97.41
      Two Ft. (24") Length - Price : $187.04
      Three Ft. (36") Length - Price : $240.72
      Four Ft. (48") Length - Price : $285.29
      Five Ft. (60") Length - Price : $338.79
      Six Ft. (72") Length - Price : $395.85
      Seven Ft. (84") Length - Price : $449.35
      Eight Ft. (96" Length) - Price : $499.26

    Technical Information

      Weight/Lineal Foot
      12.741 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      11925 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 2981.25 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    4" NOM. (4.5" OD X 0.34" WALL X 3.826" ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 4" (4.5" OD x 0.34" Wall x 3.826" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 15.31 pounds
    Dimension Name Value
    Nominal 4"
    OD 4.5"
    Wall Thickness 0.34"
    ID 3.826"
    Available Sizes
      Random Length (10"-12") - $87.65
      One Ft. (12") Length - Price : $97.39
      Two Ft. (24") Length - Price : $168.28
      Three Ft. (36") Length - Price : $227.55
      Four Ft. (48") Length - Price : $269.68
      Five Ft. (60") Length - Price : $320.26
      Six Ft. (72") Length - Price : $374.19
      Seven Ft. (84") Length - Price : $424.75
      Eight Ft. (96" Length) - Price : $471.96

    Technical Information

      Weight/Lineal Foot
      15.31 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      11233 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 2808.25 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    6" NOM. (6.625" OD X 0.432" WALL X 5.761" ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 6" (6.625" OD x 0.432" Wall x 5.761" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 28.9473 pounds
    Dimension Name Value
    Nominal 6"
    OD 6.625"
    Wall Thickness 0.432"
    ID 5.761"
    Available Sizes
      Random Length (10"-12") - $195.93
      One Ft. (12") Length - Price : $209.32
      Two Ft. (24") Length - Price : $401.89
      Three Ft. (36") Length - Price : $565.14
      Four Ft. (48") Length - Price : $669.79

    Technical Information

      Weight/Lineal Foot
      28.9473 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      9781 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 2445.25 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    SCHEDULE 80 STAINLESS STEEL PIPE T-304/304L : View In Millimeters

    6.35 MM NOM. (13.72 MM OD X 3.05 MM WALL X 7.67 MM ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 0.25" (0.54" OD x 0.12" Wall x 0.302" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 0.5453 pounds
    Dimension Name Value
    Nominal 6.35"
    OD 13.72"
    Wall Thickness 3.05"
    ID 7.67"
    Available Sizes
      Random Length (10"-12") - $15.82
      One Ft. (12") Length - Price : $17.57
      Two Ft. (24") Length - Price : $33.72
      Three Ft. (36") Length - Price : $47.41
      Four Ft. (48") Length - Price : $56.18
      Five Ft. (60") Length - Price : $66.72
      Six Ft. (72") Length - Price : $77.96
      Seven Ft. (84") Length - Price : $88.48
      Eight Ft. (96" Length) - Price : $98.32

    Technical Information

      Weight/Lineal Foot
      0.5453 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      33056 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 8264 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    9.52 MM NOM. (17.27 MM OD X 3.3 MM WALL X 10.74 MM ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 0.375" (0.68" OD x 0.13" Wall x 0.423" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 0.7736 pounds
    Dimension Name Value
    Nominal 9.52"
    OD 17.27"
    Wall Thickness 3.3"
    ID 10.74"
    Available Sizes
      Random Length (10"-12") - $18.21
      One Ft. (12") Length - Price : $20.25
      Two Ft. (24") Length - Price : $38.86
      Three Ft. (36") Length - Price : $54.67
      Four Ft. (48") Length - Price : $64.76
      Five Ft. (60") Length - Price : $76.92
      Six Ft. (72") Length - Price : $89.87
      Seven Ft. (84") Length - Price : $102.03
      Eight Ft. (96" Length) - Price : $102.01

    Technical Information

      Weight/Lineal Foot
      0.7736 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      28000 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 7000 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    12.7 MM NOM. (21.34 MM OD X 3.81 MM WALL X 13.87 MM ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 0.5" (0.84" OD x 0.15" Wall x 0.546" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 1.1199 pounds
    Dimension Name Value
    Nominal 12.7"
    OD 21.34"
    Wall Thickness 3.81"
    ID 13.87"
    Available Sizes
      Random Length (10"-12") - $11.90
      One Ft. (12") Length - Price : $13.22
      Two Ft. (24") Length - Price : $25.40
      Three Ft. (36") Length - Price : $35.70
      Four Ft. (48") Length - Price : $42.31
      Five Ft. (60") Length - Price : $50.25
      Six Ft. (72") Length - Price : $58.73
      Seven Ft. (84") Length - Price : $66.65
      Eight Ft. (96" Length) - Price : $74.06

    Technical Information

      Weight/Lineal Foot
      1.1199 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      26250 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 6562.5 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    19.05 MM NOM. (26.67 MM OD X 3.81 MM WALL X 18.85 MM ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 0.75" (1.05" OD x 0.15" Wall x 0.742" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 1.4607 pounds
    Dimension Name Value
    Nominal 19.05"
    OD 26.67"
    Wall Thickness 3.81"
    ID 18.85"
    Available Sizes
      Random Length (10"-12") - $17.58
      One Ft. (12") Length - Price : $19.52
      Two Ft. (24") Length - Price : $37.48
      Three Ft. (36") Length - Price : $52.71
      Four Ft. (48") Length - Price : $62.48
      Five Ft. (60") Length - Price : $74.18
      Six Ft. (72") Length - Price : $86.68
      Seven Ft. (84") Length - Price : $98.40
      Eight Ft. (96" Length) - Price : $98.39

    Technical Information

      Weight/Lineal Foot
      1.4607 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      22000 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 5500 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    25.4 MM NOM. (33.53 MM OD X 4.57 MM WALL X 24.31 MM ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 1" (1.32" OD x 0.18" Wall x 0.957" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 2.2202 pounds
    Dimension Name Value
    Nominal 25.4"
    OD 33.53"
    Wall Thickness 4.57"
    ID 24.31"
    Available Sizes
      Random Length (10"-12") - $16.59
      One Ft. (12") Length - Price : $18.42
      Two Ft. (24") Length - Price : $35.35
      Three Ft. (36") Length - Price : $49.74
      Four Ft. (48") Length - Price : $58.94
      Five Ft. (60") Length - Price : $70.01
      Six Ft. (72") Length - Price : $81.79
      Seven Ft. (84") Length - Price : $92.84
      Eight Ft. (96" Length) - Price : $103.16

    Technical Information

      Weight/Lineal Foot
      2.2202 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      20418 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 5104.5 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    31.75 MM NOM. (42.16 MM OD X 4.83 MM WALL X 32.46 MM ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 1.25" (1.66" OD x 0.19" Wall x 1.278" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 3.022 pounds
    Dimension Name Value
    Nominal 31.75"
    OD 42.16"
    Wall Thickness 4.83"
    ID 32.46"
    Available Sizes
      Random Length (10"-12") - $22.86
      One Ft. (12") Length - Price : $25.42
      Two Ft. (24") Length - Price : $48.80
      Three Ft. (36") Length - Price : $68.62
      Four Ft. (48") Length - Price : $81.34
      Five Ft. (60") Length - Price : $96.58
      Six Ft. (72") Length - Price : $101.56
      Seven Ft. (84") Length - Price : $115.28
      Eight Ft. (96" Length) - Price : $128.08

    Technical Information

      Weight/Lineal Foot
      3.022 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      17259 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 4314.75 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    38.1 MM NOM. (48.26 MM OD X 5.08 MM WALL X 38.1 MM ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 1.5" (1.9" OD x 0.2" Wall x 1.5" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 3.6788 pounds
    Dimension Name Value
    Nominal 38.1"
    OD 48.26"
    Wall Thickness 5.08"
    ID 38.1"
    Available Sizes
      Random Length (10"-12") - $25.12
      One Ft. (12") Length - Price : $27.92
      Two Ft. (24") Length - Price : $53.61
      Three Ft. (36") Length - Price : $75.38
      Four Ft. (48") Length - Price : $89.34
      Five Ft. (60") Length - Price : $106.09
      Six Ft. (72") Length - Price : $111.56
      Seven Ft. (84") Length - Price : $126.65
      Eight Ft. (96" Length) - Price : $140.70

    Technical Information

      Weight/Lineal Foot
      3.6788 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      15789 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 3947.25 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    50.8 MM NOM. (60.45 MM OD X 5.59 MM WALL X 49.25 MM ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 2" (2.38" OD x 0.22" Wall x 1.939" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 5.1416 pounds
    Dimension Name Value
    Nominal 50.8"
    OD 60.45"
    Wall Thickness 5.59"
    ID 49.25"
    Available Sizes
      Random Length (10"-12") - $35.78
      One Ft. (12") Length - Price : $39.74
      Two Ft. (24") Length - Price : $76.32
      Three Ft. (36") Length - Price : $107.32
      Four Ft. (48") Length - Price : $114.48
      Five Ft. (60") Length - Price : $135.94
      Six Ft. (72") Length - Price : $158.85
      Seven Ft. (84") Length - Price : $180.30
      Eight Ft. (96" Length) - Price : $194.50

    Technical Information

      Weight/Lineal Foot
      5.1416 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      13768 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 3442 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    63.5 MM NOM. (73.15 MM OD X 7.11 MM WALL X 59 MM ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 2.5" (2.88" OD x 0.28" Wall x 2.323" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 7.8769 pounds
    Dimension Name Value
    Nominal 63.5"
    OD 73.15"
    Wall Thickness 7.11"
    ID 59"
    Available Sizes
      Random Length (10"-12") - $70.26
      One Ft. (12") Length - Price : $78.07
      Two Ft. (24") Length - Price : $134.92
      Three Ft. (36") Length - Price : $189.71
      Four Ft. (48") Length - Price : $205.78
      Five Ft. (60") Length - Price : $244.37
      Six Ft. (72") Length - Price : $285.52
      Seven Ft. (84") Length - Price : $324.10
      Eight Ft. (96" Length) - Price : $360.11

    Technical Information

      Weight/Lineal Foot
      7.8769 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      14400 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 3600 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    76.2 MM NOM. (88.9 MM OD X 7.62 MM WALL X 73.66 MM ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 3" (3.5" OD x 0.3" Wall x 2.9" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 10.3871 pounds
    Dimension Name Value
    Nominal 76.2"
    OD 88.9"
    Wall Thickness 7.62"
    ID 73.66"
    Available Sizes
      Random Length (10"-12") - $76.50
      One Ft. (12") Length - Price : $85.00
      Two Ft. (24") Length - Price : $146.89
      Three Ft. (36") Length - Price : $196.61
      Four Ft. (48") Length - Price : $224.07
      Five Ft. (60") Length - Price : $266.08
      Six Ft. (72") Length - Price : $310.91
      Seven Ft. (84") Length - Price : $352.91
      Eight Ft. (96" Length) - Price : $392.10

    Technical Information

      Weight/Lineal Foot
      10.3871 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      12857 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 3214.25 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    88.9 MM NOM. (101.6 MM OD X 8.13 MM WALL X 85.45 MM ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 3.5" (4" OD x 0.32" Wall x 3.364" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 12.741 pounds
    Dimension Name Value
    Nominal 88.9"
    OD 101.6"
    Wall Thickness 8.13"
    ID 85.45"
    Available Sizes
      Random Length (10"-12") - $97.41
      One Ft. (12") Length - Price : $97.41
      Two Ft. (24") Length - Price : $187.04
      Three Ft. (36") Length - Price : $240.72
      Four Ft. (48") Length - Price : $285.29
      Five Ft. (60") Length - Price : $338.79
      Six Ft. (72") Length - Price : $395.85
      Seven Ft. (84") Length - Price : $449.35
      Eight Ft. (96" Length) - Price : $499.26

    Technical Information

      Weight/Lineal Foot
      12.741 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      11925 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 2981.25 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    101.6 MM NOM. (114.3 MM OD X 8.64 MM WALL X 97.18 MM ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 4" (4.5" OD x 0.34" Wall x 3.826" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 15.31 pounds
    Dimension Name Value
    Nominal 101.6"
    OD 114.3"
    Wall Thickness 8.64"
    ID 97.18"
    Available Sizes
      Random Length (10"-12") - $87.65
      One Ft. (12") Length - Price : $97.39
      Two Ft. (24") Length - Price : $168.28
      Three Ft. (36") Length - Price : $227.55
      Four Ft. (48") Length - Price : $269.68
      Five Ft. (60") Length - Price : $320.26
      Six Ft. (72") Length - Price : $374.19
      Seven Ft. (84") Length - Price : $424.75
      Eight Ft. (96" Length) - Price : $471.96

    Technical Information

      Weight/Lineal Foot
      15.31 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      11233 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 2808.25 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    152.4 MM NOM. (168.27 MM OD X 10.97 MM WALL X 146.33 MM ID) STAINLESS T-304/304L PIPE SCHEDULE 80

    Stainless Steel Pipe T-304/304L 6" (6.625" OD x 0.432" Wall x 5.761" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    View our "Guide to Stainless" for available grades, shapes and additional information.

    Mill Test Reports are available on this item and can be selected during the checkout process.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 28.9473 pounds
    Dimension Name Value
    Nominal 152.4"
    OD 168.27"
    Wall Thickness 10.97"
    ID 146.33"
    Available Sizes
      Random Length (10"-12") - $195.93
      One Ft. (12") Length - Price : $209.32
      Two Ft. (24") Length - Price : $401.89
      Three Ft. (36") Length - Price : $565.14
      Four Ft. (48") Length - Price : $669.79

    Technical Information

      Weight/Lineal Foot
      28.9473 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      9781 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 2445.25 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    Range of Stainless Steel pipes according to ANSI/ASME 36.19M - Stainless Steel Pipe.

    Nominal
    Pipe
    Size
    (inches)
    Outside
    Diameter
    Schedule
    5S 10S 40S 80S
    (mm) (inches) Wall Thickness and Weight
    mm
    (in)
    kg/m mm
    (in)
    kg/m mm
    (in)
    kg/m mm
    (in)
    kg/m
    1/8 10.3 0.405 - - 1.25
    (0.049)
    0.28 1.73
    (0.068)
    0.37 2.42
    (0.095)
    0.47
    1/4 13.7 0.540 - - 1.66
    (0.065)
    0.49 2.24
    (0.088)
    0.63 3.03
    (0.119)
    0.80
    3/8 17.2 0.675 - - 1.66
    (0.065)
    0.63 2.32
    (0.091)
    0.85 3.20
    (0.126)
    1.10
    1/2 21.3 0.840 1.65
    (0.065)
    0.81 2.11
    (0.083)
    1.00 2.77
    (0.109)
    1.27 3.74
    (0.147)
    1.62
    3/4 26.7 1.050 1.65
    (0.065)
    1.02 2.11
    (0.083)
    1.28 2.87
    (0.113)
    1.68 3.92
    (0.154)
    2.20
    1 33.4 1.315 1.65
    (0.065)
    1.30 2.77
    (0.109)
    2.09 3.38
    (0.133)
    2.50 4.55
    (0.179)
    3.24
    1 1/4 42.2 1.660 1.65
    (0.065)
    1.66 2.77
    (0.109)
    2.69 3.56
    (0.140)
    3.39 4.86
    (0.191)
    4.47
    1 1/2 48.3 1.900 1.65
    (0.065)
    1.91 2.77
    (0.109)
    3.11 3.69
    (0.145)
    4.06 5.08
    (0.200)
    5.41
    2 60.3 2.375 1.65
    (0.065)
    2.40 2.77
    (0.109)
    3.93 3.92
    (0.154)
    5.45 5.54
    (0.218)
    7.49
    2 1/2 73.0 2.875 2.11
    (0.083)
    3.69 3.05
    (0.120)
    5.26 5.16
    (0.203)
    8.64 7.01
    (0.276)
    11.4
    3 88.9 3.500 2.11
    (0.083)
    4.52 3.05
    (0.120)
    6.46 5.49
    (0.216)
    11.3 7.62
    (0.300)
    15.3
    3 1/2 101.6 4.000 2.11
    (0.083)
    5.18 3.05
    (0.120)
    7.41 5.74
    (0.226)
    13.6 8.08
    (0.318)
    18.6
    4 114.3 4.500 2.11
    (0.083)
    5.84 3.05
    (0.120)
    8.37 6.02
    (0.237)
    16.1 8.56
    (0.337)
    22.3
    5 141.3 5.563 2.77
    (0.109)
    9.46 3.41
    (0.134)
    11.6 6.56
    (0.258)
    21.8 9.53
    (0.375)
    31.0
    6 168.3 6.625 2.77
    (0.109)
    11.3 3.41
    (0.134)
    13.9 7.12
    (0.280)
    28.3 10.98
    (0.432)
    42.6
    8 219.1 8.625 2.77
    (0.109)
    14.8 3.76
    (0.148)
    20.0 8.18
    (0.322)
    42.5 12.70
    (0.500)
    64.6
    10 273.1 10.750 3.41
    (0.134)
    22.7 4.20
    (0.165)
    27.8 9.28
    (0.365)
    60.4 12.70
    (0.500)
    81.5
    12 323.9 12.750 3.97
    (0.156)
    31.3 4.58
    (0.180)
    36.1 9.53
    (0.375)
    73.9 12.70
    (0.500)
    97.4
    • ANSI/ASME 36.19M Stainless Steel Pipe - covers the standardization of dimensions of welded and seamless wrought stainless steel pipe

    Stainless Steel Pipes Specifications

    ASTM A312: Seamless and straight-seam welded austenitic pipe intended for high temperature and general corrosive service. Filler metal not permitted during welding.

    ASTM A358: Electric fusion welded austenitic pipe for corrosive and/or high temperature service. Typically only pipe up to 8 inch is produced to this specification. Addition of filler metal is permitted during welding.

    ASTM A790: Seamless and straight-seam welded ferritic/austenitic (duplex) pipe intended for general corrosive service, with a particular emphasis on resistance to stress corrosion cracking.

    ASTM A409: Straight-seam or spiral-seam electric fusion welded large diameter austenitic light-wall pipe in sizes 14” to 30” with walls Sch5S and Sch 10S for corrosive and/or high

    ASTM A376: Seamless austenitic pipe for high temperature applications.

    ASTM A813: Single-seam, single- or double- welded austenitic pipe for high temperature and general corrosive applications.

    ASTM A814: Cold-worked welded austenitic pipe for high temperature and general corrosive service.

    CLICK HERE FOR WEIGHT FORMULA & WEIGHT CALCULATOR


    ASTM A312 Stainless Steel Pipe Price List in India


    If you don’t see what you’re looking for just call one of our team members at +91-22-6659 5285 Or Mail Us inquiry@raajsagarsteels.com. No inquiry is too large or too small, we specialize in locating hard to find items. If you do see what you are looking, we would love to assist you and give you a quote today!

    24 Hrs. Online Whatsapp Number   Contact Person: Mr. Milap Mehta - Cell: +91-9869 532 584

    Dealer,Distributor & Suppliers of Top 10 Manufacturers of Stainless Steel Pipes
    Nippon Steel & Sumitomo Metals (NSSMC)
    Nippon Steel Pipes & Tubes
    Schoeller Bleckmann
    Schoeller Bleckmann Steel Pipes & Tubes
    SANYO Special Steel
    Sanyo Special Steel Pipes & Tubes
    Kobe Steel
    Kobe Stainless Steel Pipes & Tubes
    Valourec & Mannesman -v&m
    Salzgitter Mannesmann Stainless Tubes
    Salzgitter Mannesmann Stainless Tubes
    Wuxi
    Tubacex Innovative Steel Tube Solutions
    Tubacex Steel Tubes