A common sight in the construction and repair industry, a SS 316 hex bolt is contemplated to be ideal for projects involving docks, highway structures, bridges, and buildings. A hex bolt is a SS 316 fasteners that can be used as a headed anchor bolt.

Stainless Steel 316 Nut Bolts

Stainless Steel 316 Nut Bolts

SS 316 Fasteners

SS 316 Fasteners

SS 316 Stud Bolts

SS 316 Stud Bolts

 

Usually, the UNS s31600 bolt tends to have excellent resistance not only to seawater and brine, but also to freshwater and to chlorine water as well. Hence, this Hex shaped ASTM A193 grade 316 bolts are a very useful accessory in the building of bridges, especially those that are to be built across water bodies.Looped at one end, the SS 316 eye bolt is used to firmly attach a securing eye to a structure, after which either a rope or a cable could then be tied to it. Typically the construction of a Machinery eye bolt includes a fully threaded, which could have a collar.

Thus, eye bolts, as a fastener tend to be well suited for use with loads up to an angle of 45°. However, as one of the leading ss 316 nut bolt manufacturer in India, we do not recommend using an eye bolt without a shoulder for angular loads. Non-serrated flange bolts are often referred to as frame bolts. The circular flange present under the head of the ss316 flange bolt acts like a washer, which in turn aids to distribute the load.

 

Know about 316 bolt tensile strength & Torque

SS 316 bolts and nuts tensile strength is 550 MPa in metric and 79800 psi in English. AISI 316 Bolt torque vary based on sizes. so check torque chart before buying material. 

 

Stainless Steel 316 Bolts Availabe Size Range

Stainless Steel 316 Bolts

Size:3/6" to 2" | M3 to M56 or Custom Sizes

 

ASTM Specifications of SS 316 Fasteners
Grades and Specifications ASTM A 193/ ASME SA 193
Manufacturing Standard all International Standards and ASTM, DIN, BS
Sizes 3/6" to 2" | M3 to M56 or Custom Sizes Available as per requirement
Length 3 mm to 200 mm
Fasteners Type Lag Bolts, Square nuts, U bolts, Hex Head nuts, Eye nuts, Lock nuts, T nuts, Eye bolts, wing nuts, Counter sunk Bolts, Coupling Nuts, Square Bolts, Panel Nuts, Hex Bolt, Acorn Nuts, T bolt, Dome nuts, Hex Head Bolts

 

See Basic Types Of SS 316 Fasteners
SS 316 Anchor Bolt
SS 316 Anchor Bolt
Stainless Steel 316 Nuts
Stainless Steel 316 Nuts
SS 316 Threaded Rod
SS 316 Threaded Rod
SS 316 Washers
SS 316 Washers
Astm A193 Grade 316 Bolts
Astm A193 Grade 316 Bolts
SS 316 Hex Bolt
SS 316 Hex Bolt
UNS S31600 Bolt
UNS S31600 Bolt
316 Stainless Steel Screws
316 Stainless Steel Screws

 

Astm A193 Grade 316 Bolts Mechanical Properties Analysis
Grade Elongation (% in 50mm) min Strength of Yield 0.2% Proof (MPa) minimum Strength of Tensile (MPa) minimum Pipe Hardness
Rockwell B (HR B) maximum Brinell (HB) maximum
316 40 205 515 95 217

 

Composition Standard of UNS S31600 Bolt
Grade C Mn Si P S Cr Mo Ni N
316 min. 16.0 2.0 10.0
max. 0.08 2.0 0.75 0.045 0.03 18.0 3.0 14.0 0.10

 

Equivalent grade Chart of SS 316 Forged Rings
Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
316 S31600 304S11 58E 1.4401 X5CrNiMo17-12-2 2347 SUS 316

 

Are UNS S31600 Bolts are better fastening options in marine applications?

The UNS S31600 Bolts are made up of the 316 austenitic stainless steel. The material is a chromium nickel molybdenum alloy. Unlike the 304 grade of stainless steel, the 316 stainless steel has molybdenum added to the composition and has resistance to chloride ion corrosion stress cracking. The salt water contains sodium chloride in ionized form. Since the marine and sea water applications are in chloride ion rich environment, the applications would require chloride ion resisting material. as the UNS S31600 Bolts are made up of 316 chloride ion corrosion resistant material, they are better for fastening options in marine applications.