Table of Content
Monel Material
Monel Distributors
Monel Round Bar Specification
Monel Uses
Monel Round Bar Price
Monel Bar Sizes
Monel Equivalent
Monel Corrosion
Monel K500 Hardness
Monel K500 Specs
Monel Material Composition
Monel Material Properties
Monel Bar Stock
Monel Material : Monel is a group of nickel alloys, primarily composed of nickel (from 52 to 67%) and copper, with small amounts of iron, manganese, carbon, and silicon. (Alloys with copper contents 60% or more are called cupronickel.)
Raaj Sagar Steels is the leading stockholder of Monel 400 & Monel K500 Suppliers | Distributors | Dealer | Exporter | Stockist in India
Raaj Sagar Steels is ISO and NORSOK Approved Distributors & Suppliers of Monel Round Bars. Buy Monel 400 Bar (Round Bar / Flat Bar / Hex Bar / Square Bar & Rod ) available in diversity of sizes in Big stock, we deliver Monel Bar with Exceptional sizes & Quality.
Wholesale Trader and Distributors of Monel Material Products Like : Fasteners / Pipe / Tube / Round Bar / Flat Bar / Hex Bar / Square Bar & Rod
Standards | : | ASTM / ASME |
Designation | : | Astm B164, SB 164 / B 865 |
Size | : | 1/2" to 24" |
Grade | : | Monel 400 (UNS No. N04400) Round Bars & Rods Monel K500 (UNS No. N05500) Round Bar |
Form | : | Round, Square, Hex (A/F), Bush, Rectangle, Flat, Billet, Ingot, Forging, PSQ Bar, Wire Rod, Wire (Coil Form), Wire-mesh etc. |
Monel 400 Round Bar/Wire: ASTM B164, QQ-N-281 , BS3076NA13, AMS 4675, AMS 4730, AMS 4731, DIN 17752, DIN 17753, VdTUV 263
Monel 400 Pipe & Tube: ASTM B165, ASTM B829, ASTM B775, ASTM B725, ASTM B163, ASTM B730, ASTM B751, AMS 4574, DIN 17752, VdTUV 2635
Monel 400 Tubing is offered in a variety of requested sizes.
Monel K500 Round Bar/Wire: ASME SB-865, AMS 4676, QQ N 286, BS3073NA18, DIN 17750, ISO 6208, BS3075NA18, BS3076NA18, ASTM- B-865, DIN 17752, DIN 17753, DIN 17754, ASME Code Case 1192, ISO 9723, ISO 9724, ISO 9725, BS3074NA18, DIN 17751, DIN 17743
Sizes |
Monel 400 Round bar |
Diameter: 3mm~800mm |
Monel 400 Angle bar |
Size: 3mm*20mm*20mm~12mm*100mm*100mm |
|
Monel 400 Square bar |
Size: 4mm*4mm~100mm*100mm |
|
Monel 400 Flat bar |
Thickness: 2mm~100mm |
|
Width: 10mm~500mm |
||
Monel 400 Hexagonal |
Size: 2mm~100mm |
STANDARD | UNS | WERKSTOFF NR. | EN | BS | GOST | JIS | AFNOR |
---|---|---|---|---|---|---|---|
Monel 400 | N04400 | 2.4360 | NiCu30Fe | NA 13 | МНЖМц 28-2,5-1,5 | NW 4400 | NU-30M |
Monel K500 | N05500 | 2.4375 | - | - | - | - | - |
Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.
Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.
Bar | Rod |
---|---|
AMS 4676 | AMS 4676 |
Grade | Ni | Fe | C | Mn | Si | Cu | Al | S |
---|---|---|---|---|---|---|---|---|
Monel 400 | 63.0 min | 1.0 – 2.5 | 0.3 max | 2.0 max | 0.5 max | 28.0 – 34.0 | 0.50 max | 0.02 max |
Ni | Cu | Al | Ti | C | Mn | Fe | S | Si |
---|---|---|---|---|---|---|---|---|
63.0-70.0 | Remainder | 2.30-3.15 | .35-.85 | .25 max | 1.5 max | 2.0 max | .01 max | .50 max |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
---|---|---|---|---|
8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80000 , MPa – 550 | Psi – 35000 , MPa – 240 | 40 % |
Typical Room Temperature Tensile Properties of Annealed Material
Monel Product Form | Condition | Tensile (ksi) | .2% Yield (ksi) | Elongation % | Hardness |
---|---|---|---|---|---|
Rod & Bar | Hot-Finished/Aged | 140-190 | 100-150 | 30-20 | 27-38 HRC |
Rod & Bar | Hot Finished/Annealed | 90-110 | 40-60 | 45-25 | 75-90 HRB |
Rod & Bar | Hot Finished/Annealed/Aged | 130-165 | 85-120 | 35-20 | 24-35 HRC |
Rod & Bar | Cold-Drawn/Aged | 135-185 | 95-160 | 30-15 | 25-41 HRC |
Rod & Bar | Cold-Drawn/Annealed/Aged | 130-190 | 85-120 | 30-20 | 24-35 HRC |
Plate | ot-Finished/Aged | 140-180 | 100-135 | 30-20 | 27-37 HRC |
Sheet | Cold-Rolled/Annealed | 90-105 | 40-65 | 45-25 | 85 HRB Max |
Uns N04400 Round Bar Uns N04400 Hollow Bars Uns N04400 Polish Bars Uns N04400 Rectangular Bar Uns N04400 Flat Bar Uns N04400 Threaded Bar Uns N04400 Black Bar Uns N04400 Square Bar |
Uns N04400 Flat Block Bar Uns N04400 Triangle Bar Uns N04400 Hollow Ring Bar Uns N04400 Forged Round Bar Uns N04400 Bright Round Bar Uns N04400 Cold Drawn Bar Uns N04400 Threaded Rod Uns N04400 Welding Rod |
Uns N04400 400 Rod Uns N04400 Tig Rod Uns N04400 Rod Uns N04400 Filler Rod Uns N04400 PSQ Bar Uns N04400 Hex Bar Uns N04400 Shaft Uns N04400 K500 Rod |
Click Below For | |