• Low Carbon Bar Sizes & Carbon Steel Bar Sizes & ASTM A36 Bar Sizes, Hot Rolled Sizes, Square Bar Sizes, Flat Bar Sizes, Cold Finish Bar Sizes
  • Carbon Steel Bar Sizes

    Low Carbon Bar Sizes & Carbon Steel Bar Sizes

    Click Below For  

    Selection Guide

    Hot rolled

    Merchant Bar Quality

    Only a minimum discard is made from each ingot, but bars should be free from visible piping. Seams and other surface irregularities may be present. Chemistry is subject to ladle analysis only. Easily machined, welded, and formed but not particularly recommended for forging, heat treating or complicated machining operations. Conforms to ASTM A575 and QQ-S-630.

    Low Carbon

    M1010 — Low carbon, general purpose merchant quality steel featuring economy plus formability and weldability.

    M1020 — A low carbon, general purpose, merchant quality steel, produced to wider carbon and manganese ranges than standard steels. Suitable for forming and welding.

    Medium Carbon

    M1044 — merchant quality steel is similar to AISI 1045. Because it contains lesser amounts of manganese (.25/.60), strength and responsiveness to heat treatment are slightly lower.

    ASTM A36 — Bars designed for use in structural applications. Minimum physical properties of 36,000 psi yield strength and 58,000 psi tensile strength

    HOT ROLLED ROUNDS SIZES
    Conforms to A-36
    Standard Length 20’
    Size in Inches Estimated Weight Lbs. Size And Inches Estimated Weight Lbs.
    Per Foot 20 Ft. Bar Per Foot 20 Ft. Bar
    1/4 .167 3.34 1-1/2 6.01 120.20
    5/16 .261 5.22 1-5/8 7.05 141.00
    3/8 .376 7.52 1-3/4 8.18 163.60
    7/16 .511 10.22 1-7/8 9.39 187.80
    1/2 .668 13.36 2 10.68 213.60
    9/16 .845 16.90 2-1/8 12.06 241.20
    5/8 1.04 20.86 2-1/4 13.52 270.40
    .680 1.26 25.20 2-3/8 15.06 301.20
    3/4 1.50 30.04 2-1/2 16.69 333.80
    25/32 1.63 32.60 2-5/8 18.40 368.00
    7/8 2.04 40.88 2-3/4 20.20 404.00
    29/32 2.19 43.80 2.7/8 22.07 441.40
    1 2.67 53.40 3 24.03 480.60
    1-1/8 3.38 67.58 3-1/2 32.71 654.20
    1.145 3.47 69.40 4 42.73 854.60
    1-1/4 4.17 83.46 5 66.76 1335.2
    1-3/8 5.05 101.00 6 96.13 1922.60
    Hot dipped galvanized sizes available from stock
    Special thread rolling sizes Tampa Stock only

     

    HOT ROLLED SQUARES SIZES  

     

     

    Conforms to A-36
    Standard Length 20’
    Size And Inches Estimated Weight Lbs. Size And Inches Estimated Weight Lbs.
    Per Foot 20 Ft. Bar Per Foot 20 Ft. Bar
    3/8 .478 9.56 1-1/4 5.31 106.30
    1/2 .850 17.00 1-3/8 6.43 128.60
    5/8 1.33 26.56 1-1/2 7.65 153.00
    3/4 1.91 38.26 1-3/4 10.41 208.20
    7/8 2.60 52.06 2 13.60 272.00
    1 3.40 68.00 2-1/4 17.21 344.20
    1-1/8 4.30 86.06 2-1/2 21.25 425.00
    Hot dipped galvanized sizes available from stock Special thread rolling sizes Tampa stock only
    MILL EDGE  
    HOT ROLLED STRIP SIZES
    AISI 1008 ASTM-A569
    Standard Length 20′
    Size in Inches Weight Lbs. Per Ft. Est. Wt. 12′ Bar Size in Inches Weight Lbs. Per Ft. Est. Wt. 12′ Bar
    1/8 x 1/2 .213 4.26 3/16 x 2-1/2 1.59 31.88
    1/8 x 5/8 .266 5.32 3/16 x 2-3/4 1.75 35.06
    1/8 x 3/4 .319 6.38 3/16 x 3 1.91 38.26
    1/8 x 1 .425 8.50 3/16 x 4 2.55 51.00
    1/8 x 1-1/8 .478 9.56 3/16 x 5 3.19 63.76
    1/8 x 1-1/4 .531 10.62 3/16 x 6 3.83 76.50
    1/8 x 1-1/2 .638 12.76 3/16 x 7 4.47 89.40
    1/8 x 1-3/4 .744 14.88 3/16 x 8 5.10 102.00
    1/8 x 2 .850 17.00 3/16 x 10 6.38 127.50
    1/8 x 2-1/2 1.06 21.26 3/16 x 12 7.66 153.00
    1/8 x 3 1.28 25.50          
    1/8 x 4 1.70 34.00 1/4 x 1/2 .425 8.50
    1/8 x 5 2.13 42.50 1/4 x 5/8 .531 10.62
    1/8 x 6 2.55 51.00 1/4 x 3/4 .638 12.76
    1/8 x 7 2.98 59.60 1/4 x 1 .850 14.45
    1/8 x 8 3.40 68.00 1/4 x 1-1/8 .956 19.12
    1/8 x 10 4.25 85.00 1/4 x 1-1/4 1.06 21.20
    1/8 x 12 5.10 102.00 1/4 x 1-1/2 1.28 25.60
              1/4 x 1-3/4 1.49 29.80
    3/16 x 1/2 .319 6.38 1/4 x 2 1.70 34.00
    3/16 x 5/8 .398 7.96 1/4 x 2-1/2 2.13 42.60
    3/16 x 3/4 .478 9.56 1/4 x 2-3/4 2.34 46.80
    3/16 x 1 .638 12.76 1/4 x 3 2.55 51.00
    3/16 x 1-1/8 .717 14.34 1/4 x 4 3.40 68.00
    3/16 x 1-1/4 .797 15.94 1/4 x 5 4.25 85.00
    3/16 x 1-1/2 .956 19.12 1/4 x 6 5.10 102.00
    3/16 x 1-3/4 1.12 22.32 1/4 x 7 5.95 119.00
    3/16 x 2 1.28 25.50 1/4 x 8 6.80 136.00
              1/4 x 10 8.50 170.00
              1/4 x 12 10.20 204.00

    ALL SIZES AVAILABLE AS HOT DIPPED GALVANIZED

    HOT ROLLED FLAT BAR SIZES  

     

    1/4 AND 5/16 INCHES
    A36 SQ. EDGE A36 SQ. EDGE
    Standard Length 20′ Standard Length 20′
    SIZE IN INCHES Weight Lbs. Per Ft Est. Wt. 12′ Bar SIZE IN INCHES Weight Lbs. Per Ft Est. Wt. 12′ Bar
    1/4 x 3/8 .319 6.38 5/16 x 1/2 .531 10.62
    1/4 x 1/2 .425 8.50 5/16 x 5/8 .664 13.28
    1/4 x 5/8 .531 10.62 5/16 x 3/4 .797 15.84
    1/4 x 3/4 .638 12.76 5/16 x 7/8 .930 18.60
    1/4 x 7/8 .744 14.88 5/16 x 1 1.063 21.26
    1/4 x 1 .850 17.00 5/16 x 1-1/8 1.195 23.90
    1/4 x 1-1/8 .956 19.12 5/16 x 1-1/4 1.328 26.56
    1/4 x 1-1/4 1.063 21.26 5/16 x 1-3/8 1.461 29.22
    1/4 x 1-3/8 1.169 23.38 5/16 x 1-1/2 1.594 31.88
    1/4 x 1-1/2 1.275 25.50 5/16 x 1-3/4 1.859 37.18
    1/4 x 1-5/8 1.381 27.62 5/16 x 2 2.125 42.50
    1/4 x 1-3/4 1.488 29.76 5/16 x 2-1/4 2.391 47.82
    1/4 x 2 1.700 34.00 5/16 x 2-1/2 2.656 53.12
    1/4 x 2-1/4 1.913 38.26 5/16 x 2-3/4 2.922 58.44
    1/4 x 2-1/2 2.125 42.50 5/16 x 3 3.188 63.76
    1/4 x 2-3/4 2.338 46.76 5/16 x 3-1/2 3.719 74.38
    1/4 x 3 2.550 51.00 5/16 x 4 4.250 85.00
    1/4 x 3-1/4 2.763 55.26 5/16 x 4-1/2 4.781 95.62
    1/4 x 3-1/2 2.975 59.50 5/16 x 5 5.313 106.26
    1/4 x 3-3/4 3.188 63.76 5/16 x 5-1/2 5.844 116.88
    1/4 x 4 3.400 68.00 5/16 x 6 6.375 127.50
    1/4 x 4-1/2 3.825 76.50 5/16 x 7 7.438 148.76
    1/4 x 5 4.250 85.00 5/16 x 8 8.500 170.00
    1/4 x 5-1/2 4.675 93.50 5/16 x 9 9.570 191.40
    1/4 x 6 5.100 102.00 5/16 x 10 10.630 212.60
    1/4 x 7 5.950 119.00 5/16 x 11 11.700 234.00
    1/4 x 8 6.800 136.00 5/16 x 12 12.760 255.20

     

    HOT ROLLED FLAT BAR SIZES
    3/8″ and 1/2″
    A36 SQ. EDGE A36 SQ. EDGE
    Standard Length 20′ Standard Length 20′
    Size in Inches Size in Inches
    3/8 x 1/2 .638 12.76 1/2 x 5/8 1.063 21.26
    3/8 x 5/8 .797 15.94 1/2 x 3/4 1.275 25.50
    3/8 x 3/4 .956 19.12 1/2 x 7/8 1.488 29.76
    3/8 x 7/8 1.116 22.32 1/2 x 1 1.700 34.00
    3/8 x 1 1.276 25.52 1/2 x 1-1/8 1.913 38.26
    3/8 x 1-1/8 1.434 28.68 1/2 x 1-1/4 2.125 42.50
    3/8 x 1-1/4 1.594 31.88 1/2 x 1-3/8 2.338 46.76
    3/8 x 1-3/8 1.753 35.06 1/2 x 1-1/2 2.550 51.00
    3/8 x 1-1/2 1.913 38.26 1/2 x 1-3/4 2.975 59.50
    3/8 x 1-5/8 2.072 41.44 1/2 x 2 3.400 68.00
    3/8 x 1-3/4 2.231 44.62 1/2 x 2-1/4 3.825 76.50
    3/8 x 2 2.550 51.00 1/2 x 2-1/2 4.250 85.00
    3/8 x 2-1/4 2.869 57.38 1/2 x 2-3/4 4.675 93.50
    3/8 x 2-1/2 3.188 63.76 1/2 x 3 5.100 102.00
    3/8 x 2-3/4 3.506 70.12 1/2 x 3-1/4 5.525 110.50
    3/8 x 3 3.825 76.50 1/2 x 3-1/2 5.950 119.00
    3/8 x 3-1/4 4.144 82.88 1/2 x 4 6.800 136.00
    3/8 x 3-1/2 4.463 89.26 1/2 x 4-1/2 7.650 153.00
    3/8 x 4 5.100 102.00 1/2 x 5 8.500 170.00
    3/8 x 4-1/2 5.738 114.76 1/2 x 5-1/2 9.350 187.00
    3/8 x 5 6.375 127.50 1/2 x 6 10.200 204.00
    3/8 x 5-1/2 7.013 140.26 1/2 x 7 11.900 238.00
    3/8 x 6 7.650 153.00 1/2 x 8 13.600 272.00
    3/8 x 7 8.925 178.50          
    3/8 x 8 10.200 204.00          

     

    HOT ROLLED FLAT BAR

    SIZES
    5/8 ” and 3/4″
    A36 SQ. EDGE A36 SQ. EDGE
    Standard Length 20′ Standard Length 20′
    Size in Inches Weight Lbs. Per Ft. Est. Wt. 12′ Bar Size in Inches Weight Lbs. Per Ft. Est. Wt. 12′ Bar
    5/8 x 3/4 1.594 31.88 3/4 x 7/8 2.231 44.62
    5/8 x 7/8 1.859 37.18 3/4 x 1 2.550 51.00
    5/8 x 1 2.125 42.50 3/4 x 1-1/8 2.869 57.38
    5/8 x 1-1/8 2.391 47.82 3/4 x 1-1/4 3.188 63.76
    5/8 x 1-1/4 2.656 53.12 3/4 x 1-1/2 3.825 76.50
    5/8 x 1-1/2 3.188 63.76 3/4 x 1-3/4 4.463 89.26
    5/8 x 1-3/4 3.719 74.38 3/4 x 2 5.100 102.00
    5/8 x 2 4.250 85.00 3/4 x 2-1/4 5.738 114.76
    5/8 x 2-1/4 4.781 95.62 3/4 x 2-1/2 6.375 127.50
    5/8 x 2-1/2 5.313 106.26 3/4 x 2-3/4 7.013 140.26
    5/8 x 2-3/4 5.844 116.88 3/4 x 3 7.650 153.00
    5/8 x 3 6.375 127.50 3/4 x 3-1/4 8.288 165.76
    5/8 x 3-1/4 6.906 138.12 3/4 x 3-1/2 8.925 178.50
    5/8 x 3-1/2 7.438 148.76 3/4 x 4 10.200 204.00
    5/8 x 4 8.500 170.00 3/4 x 4-1/2 11.475 229.50
    5/8 x 4-1/2 9.563 191.26 3/4 x 5 12.750 255.00
    5/8 x 5 10.625 212.50 3/4 x 5-1/2 14.025 280.50
    5/8 x 5-1/2 11.688 233.76 3/4 x 6 15.300 306.00
    5/8 x 6 12.750 255.00 3/4 x 7 17.850 357.00
    5/8 x 7 14.875 297.50 3/4 x 8 20.400 408.00
    5/8 x 8 17.000 340.00          

     

    HOT ROLLED FLAT BAR SIZES
    7/8 AND 1
    A36 SQ. EDGE A36 SQ. EDGE
    Standard Length 20′ Standard Length 20′
    Size in Inches Weight Lbs. Per Ft. Est. Wt. 12′ Bar Size in Inches Weight Lbs. Per Ft. Est. Wt. 12′ Bar
    7/8 x 1 2.975 59.50 1 x 1-1/4 4.250 85.00
    7/8 x 1-1/4 3.719 74.38 1 x 1-1/2 5.100 102.00
    7/8 x 1-1/2 4.463 89.26 1 x 1-3/4 5.950 119.00
    7/8 x 1-3/4 5.206 104.12 1 x 2 6.800 136.00
    7/8 x 2 5.950 119.00 1 x 2-1/4 7.650 153.00
    7/8 x 2-1/4 6.694 133.88 1 x 2-1/2 8.500 170.00
    7/8 x 2-1/2 7.438 148.76 1 x 2-3/4 9.350 187.00
    7/8 x 2-3/4 8.181 163.62 1 x 3 10.200 204.00
    7/8 x 3 8.925 178.50 1 x 3-1/4 11.050 221.00
    7/8 x 3-1/2 10.413 208.26 1 x 3-1/2 11.900 238.00
    7/8 x 4 11.900 238.00 1 x 4 13.600 272.00
    7/8 x 4-1/2 13.388 267.76 1 x 4-1/2 15.300 306.00
    7/8 x 5 14.875 297.50 1 x 5 17.000 340.00
    7/8 x 6 17.850 357.00 1 x 5-1/2 18.700 374.00
    7/8 x 7 20.825 416.50 1 x 6 20.400 408.00
    7/8 x 8 23.800 476.00 1 x 7 23.800 476.00
              1 x 8 27.20 544.00

     

    HOT ROLLED FLAT BAR

    SIZES

     

    1-1/8 THRU 3
    A36 SQ. EDGE A36 SQ. EDGE
    Standard Length 20′ Standard Length 20′
    Size in Inches Weight Lbs. Per Ft. Est. Wt. 12′ Bar Size in Inches Weight Lbs. Per Ft. Est. Wt. 12′ Bar
    1-1/8 x 2 7.650 153.00 1-3/4 x 2 11.900 238.00
    1-1/8 x 3 11.475 229.50 1-3/4 x 2-1/2 14.875 297.50
    1-1/8 x 4 15.300 306.00 1-3/4 x 3 17.850 357.00
    1-1/8 x 5 19.125 382.50 1-3/4 x 3-1/2 20.825 416.50
    1-1/8 x 6 22.950 459.00 1-3/4 x 4 23.800 476.00
    1-1/8 x 7 26.775 535.50 1-3/4 x 4-1/2 26.775 535.50
    1-1/8 x 8 30.600 512.00 1-3/4 x 5 29.750 595.00
              1-3/4 x 6 35.700 714.00
    1-1/4 x 1-1/2 6.375 127.50 1-3/4 x 7 41.650 833.00
    1-1/4 x 1-3/4 7.438 148.76 1-3/4 x 8 47.600 952.00
    1-1/4 x 2 8.500 170.00          
    1-1/4 x 2-1/4 9.563 191.26 2 x 2-1/2 17.000 340.00
    1-1/4 x 2-1/2 10.625 212.50 2 x 3 20.400 408.00
    1-1/4 x 2-3/4 11.688 233.76 2 x 3-1/2 23.800 476.00
    1-1/4 x 3 12.750 255.00 2 x 4 27.200 544.00
    1-1/4 x 3-1/2 14.875 297.50 2 x 4-1/2 30.600 612.00
    1-1/4 x 4 17.000 340.00 2 x 5 34.000 680.00
    1-1/4 x 4-1/2 19.125 382.50 2 x 6 40.800 816.00
    1-1/4 x 5 21.250 425.00 2 x 7 47.600 952.00
    1-1/4 x 5-1/2 23.375 467.50 2 x 8 54.400 1088.00
    1-1/4 x 6 25.500 510.00       68.070 1361.40
    1-1/4 x 7 29.750 595.00       81.680 1633.60
    1-1/4 x 8 34.000 680.00          
              2-1/2 x 3 25.500 510.00
    1-1/2 x 2 10.200 204.00 2-1/2 x 3-1/2 29.750 595.00
    1-1/2 x 2-1/2 12.750 255.00 2-1/2 x 4 34.000 680.00
    1-1/2 x 3 15.300 306.00 2-1/2 x 4-1/2 38.250 765.00
    1-1/2 x 3-1/2 17.850 357.00 2-1/2 x 5 42.500 850.00
    1-1/2 x 4 20.400 408.00 2-1/2 x 6 51.000 1020.00
    1-1/2 x 4-1/2 22.950 459.00 2-1/2 x 7 59.500 1190.00
    1-1/2 x 5 25.500 510.00 2-1/2 x 8 68.000 1360.00
    1-1/2 x 6 30.600 612.00          
    1-1/2 x 7 35.700 714.00 3 x 4 40.80 816.00
    1-1/2 x 8 40.800 816.00 3 x 4-1/2 45.90 918.00
              3 x 5 51.00 1020.00
              3 x 6 61.20 1224.00
              3 x 7 71.40 1428.00
              3 x 8 81.60 1632.00
    All sizes available as hot dipped galvanized

    COLD FINISHED

    1018—A low carbon steel with a medium manganese content. Has good hardening properties, fair machinability and is excellent for cold bending and forming operations. Readily brazed and welded. Suitable for shafting and for applications that do not require the greater strength of high carbon and alloy steels. Conforms to ASTM A-108 and AMS 5069. (Not applicable to bars under 2-15/16” and sizes lighter than 29.34 lbs. per foot.)

    1045—Is a higher carbon content imparts increased strength to the steel. Response to heat treatment is excellent and the resulting mechanical properties which can be obtained permit a wide usage in the production of machinery parts and shafts. Conforms to ASTM A-108.

    1144—Is a medium carbon, resulfurized, free cutting steel that responds well to heat treatment. The relatively high carbon, high manganese content provides a steel with good strength and wear resistance. It is often used for induction hardened parts, and screw machine applications. Conforms to ASTM A-108.

    12L14—Is the most widely used steel for screw machine parts applications. Improved machinability is obtained by the addition of lead which acts as an internal lubricant allowing increased machining speeds and prolonging cutting tool life. Conforms to ASTM A-108.

    1/4″ COLD FINISHED FLAT BAR   5/16″ COLD FINISHEDFLAT BAR  
    1018 SIZES 1018 SIZES
    Standard Lengths 12′ Standard Lengths 12′
    SIZE IN INCHES WEIGHT LBS PER FT. EST. WT. 12’BAR SIZE IN INCHES WEIGHT LBS PER FT. EST. WT. 12’BAR
    1/4 x 1 .850 10.2 5/16 x 1 1.063 12.7
    1/4 x 1-1/8 .956 11.4 5/16 x 1-1/8 1.195 14.3
    1/4 x 1-1/4 1.063 12.7 5/16 x 1-1/4 1.328 15.9
    1/4 x 1-3/8 1.169 14.0 5/16 x 1-3/8 1.461 17.5
    1/4 x 1-1/2 1.275 15.3 5/16 x 1-1/2 1.594 19.1
    1/4 x 1-5/8 1.381 16.6 5/16 x 1-3/4 1.859 22.3
    1/4 x 1-3/4 1.488 17.8 5/16 x 2 2.125 25.5
    1/4 x 2 1.700 20.4 5/16 x 2-1/4 2.391 28.7
    1/4 x 2-1/4 1.913 22.9 5/16 x 2-1/2 2.656 31.8
    1/4 x 2-1/2 2.125 25.5 5/16 x 2-3/4 2.922 35.0
    1/4 x 2-3/4 2.338 28.0 5/16 x 3 3.188 38.2
    1/4 x 3 2.550 30.6 5/16 x 3-1/2 3.719 44.6
    1/4 x 3-1/4 2.763 33.1 5/16 x 4 4.250 51.0
    1/4 x 3-1/2 2.975 35.7 5/16 x 4-1/2 4.781 57.3
    1/4 x 3-3/4 3.188 38.2 5/16 x 5 5.313 63.7
    1/4 X 4 3.400 40.8 5/16 X 5-1/2 5.844 116.8
    1/4 X 4-1/2 3.825 45.9 5/16 X 6 6.375 127.5
    1/4 x 5 4.250 51.0
    1/4 X 5-1/2 4.675 56.1
    1/4 X 6 5.100 61.2

     

    3/8″ COLD FINISHED FLAT BAR 1/2″ COLD FINISHED FLAT BAR
    1018 SIZES 1018 SIZES
    Standard Lengths 12′ Standard Lengths 12′
    SIZE IN INCHES WEIGHT LBS PER FT. EST. WT. 12’BAR SIZE IN INCHES WEIGHT LBS PER FT. EST. WT. 12’BAR
    3/8 x 1 1.276 15.3 1/2 x 1 1.700 20.4
    3/8 x 1-1/8 1.434 17.2 1/2 x 1-1/8 1.913 22.9
    3/8 x 1-1/4 1.594 19.1 1/2 x 1-1/4 2.125 25.5
    3/8 x 1-3/8 1.753 21.0 1/2 x 1-3/8 2.338 28.0
    3/8 x 1-1/2 1.913 22.9 1/2 x 1-1/2 2.550 30.6
    3/8 x 1-5/8 2.072 24.9 1/2 x 1-3/4 2.975 35.9
    3/8 x 1-3/4 2.231 26.7 1/2 x 2 3.400 40.8
    3/8 x 2 2.550 30.6 1/2 x 2-1/4 3.825 45.9
    3/8 x 2-1/4 2.869 34.4 1/2 x 2-1/2 4.250 51.0
    3/8 x 2-1/2 3.188 38.2 1/2 x 2-3/4 4.675 56.1
    3/8 x 2-3/4 3.506 42.0 1/2 x 3 5.100 61.2
    3/8 x 3 3.825 45.9 1/2 x 3-1/4 5.525 66.3
    3/8 x 3-1/4 4.144 49.7 1/2 x 3-1/2 5.950 71.4
    3/8 x 3-1/2 4.463 53.5 1/2 x 4 6.800 81.6
    3/8 x 4 5.100 61.2 1/2 x 4-1/2 7.650 91.8
    3/8 x 4-1/2 5.738 68.8 1/2 x 5 8.500 102.0
    3/8 x 5 6.375 76.5 1/2 x 5-1/2 9.350 112.2
    3/8 x 5-1/2 7.013 84.1 1/2 x 6 9.350 122.4
    3/8 x 6 7.650 91.8          

     

    5/8″ COLD FINISHED FLAT BAR 3/4″ COLD FINISHED FLAT BAR
    1018 SIZES 1018 SIZES
    Standard Lengths 12′ Standard Lengths 12′
    Size in Inches Weight Lbs. Per Ft. Est. Wt. 12′ Bar Size in Inches Weight Lbs. Per Ft. Est. Wt. 12′ Bar
    5/8 x 1 2.125 25.5 3/4 x 1 2.550 30.6
    5/8 x 1-1/8 2.391 28.7 3/4 x 1-1/8 2.869 34.4
    5/8 x 1-1/4 2.656 31.9 3/4 x 1-1/4 3.188 39.8
    5/8 x 1-1/2 3.188 38.3 3/4 x 1-1/2 3.825 45.9
    5/8 x 1-3/4 3.719 44.6 3/4 x 1-3/4 4.463 53.6
    5/8 x 2 4.250 51.0 3/4 x 2 5.100 61.2
    5/8 x 2-1/4 4.781 57.4 3/4 x 2-1/4 5.738 68.9
    5/8 x 2-1/2 5.313 63.7 3/4 x 2-1/2 6.375 76.5
    5/8 x 2-3/4 5.844 70.1 3/4 x 2-3/4 7.013 84.1
    5/8 x 3 6.375 76.5 3/4 x 3 7.650 91.8
    5/8 x 3-1/4 6.906 82.9 3/4 x 3-1/4 8.288 99.4
    5/8 x 3-1/2 7.438 89.3 3/4 x 3-1/2 8.925 107.1
    5/8 x 4 8.500 102.0 3/4 x 4 10.200 122.4
    5/8 x 4-1/2 9.563 114.8 3/4 x 4-1/2 11.475 137.7
    5/8 x 5 10.625 127.5 3/4 x 5 12.750 153.0
    5/8 x 5-1/2 11.688 140.3 3/4 x 5-1/2 14.025 168.3
    5/8 x 6 12.750 153.0 3/4 x 6 15.300 183.6

     

    7/8″ COLD FINISHED FLAT BAR 1″ COLD FINISHED FLAT BAR
    1018 SIZES 1018 SIZES
    Standard Lengths 12′ Standard Lengths 12′
    7/8 x 1 2.975 35.7 1 x 1-1/4 4.250 51.0
    7/8 x 1-1/4 3.719 44.6 1 x 1-1/2 5.100 61.2
    7/8 x 1-1/2 4.463 53.5 1 x 1-3/4 5.950 71.4
    7/8 x 1-3/4 5.206 62.5 1 x 2 6.800 81.6
    7/8 x 2 5.950 59.5 1 x 2-1/4 7.650 91.8
    7/8 x 2-1/4 6.694 80.3 1 x 2-1/2 8.500 102.0
    7/8 x 2-1/2 7.438 89.2 1 x 2-3/4 9.350 112.2
    7/8 x 2-3/4 8.181 98.1 1 x 3 10.200 122.4
    7/8 x 3 8.925 107.0 1 x 3-1/4 11.050 132.6
    7/8 x 3-1/2 10.413 124.9 1 x 3-1/2 11.900 142.8
    7/8 x 4 11.900 142.8 1 x 4 13.600 163.2
    7/8 x 4-1/2 13.388 160.6 1 x 4-1/2 15.300 183.6
    7/8 x 5 14.875 178.5 1 x 5 17.000 204.0
    7/8 x 6 17.850 214.2 1 x 5-1/2 18.700 224.4
              1 x 6 20.400 244.8
    COLD FINISHED ROUND BAR SIZES  
    1018, 1045, and 1144
    Standard Lengths 20’
    + 12L14 Lengths 12’
    Size in Inches Weight Lbs. Per. Ft. Est. Wt 20’ Bar Size in Inches Weight Lbs. Per. Ft. Est. Wt 20’ Bar
    1/8″ 0.042 .840 2-3/4″ 20.20 404.00
    5/32″ 0.065 1.30 2-13/16″ 21.12 422.40
    3/16″ 0.094 1.88 2-7/8″ 22.07 441.40
    7/32″ 0.128 2.56 2-15/16″ 23.04 460.80
    1/4″ 0.167 3.34 3″ 24.03 480.60
    9/32″ 0.211 4.22 3-1/16″ 25.05 501.00
    5/16″ 0.261 5.22 3-1/8″ 26.08 521.60
    11/32″ 0.316 6.32 3-3/16″ 27.13 542.60
    3/8″ 0.376 7.52 3-1/4″ 28.21 564.20
    13/32″ 0.441 8.82 3-5/16″ 29.30 586.00
    7/16″ 0.511 10.22 3-3/8″ 30.42 608.40
    15/16″ 0.587 11.74 3-7/16″ 31.55 631.00
    1/2″ 0.668 13.36 3-1/2″ 32.71 654.20
    17/32″ 0.754 15.08 3-9/16″ 33.89 677.80
    9/16″ 0.845 16.90 3-5/8″ 35.09 701.80
    19/32″ 0.941 18.82 3-11/16″ 36.31 726.20
    5/8″ 1.040 20.80 3-3/4″ 37.55 751.00
    11/16″ 1.260 25.20 3-13/16″ 38.81 776.20
    3/4″ 1.500 30.00 3-7/8″ 40.10 802.00
    13/16″ 1.760 35.20 3-15/16″ 41.40 828.00
    7/8″ 2.040 40.80 4″ 42.73 854.60
    15/16″ 2.350 47.00 4-1/8″ 45.44 908.80
    1″ 2.670 53.40 4-3/16″ 46.83 936.60
    1-1/16″ 3.010 60.20 4-1/4″ 48.23 964.60
    1-1/8″ 3.380 67.20 4-5-16″ 49.66 993.20
    1-3/16″ 3.770 75.40 4-3/8″ 51.11 1022.22
    1-1/4″ 4.170 83.40 4-7/16″ 52.58 1051.60
    1-5/16″ 4.600 92.00 4-1/2″ 54.07 1081.40
    1-3/8″ 5.050 101.00 4-9/16″ 55.59 1111.80
    1-7/16″ 5.520 110.40 4-5/8″ 57.12 1142.40
    1-1/2″ 6.010 120.20 4-11/16″ 58.67 1173.40
    1-9/16″ 6.520 130.40 4-3/4″ 60.25 1205.00
    1-5/8″ 7.050 141.00 4-7/8″ 63.46 1269.20
    1-11/16″ 7.600 152.00 4-15/16″ 65.10 1302.00
    1-3/4″ 8.180 163.60 5″ 66.76 1335.20
    1-13/16″ 8.770 175.40 5-1/16″ 68.44 1368.80
    1-7/8″ 9.390 187.80 5-1/8″ 70.14 1402.80
    1-15/16″ 10.02 200.40 5-3/16″ 71.86 1437.20
    2″ 10.68 213.60 5-1/4″ 73.60 1472.00
    2-1/16″ 11.36 227.20 5-3/8″ 77.15 1543.00
    2-1/8″ 12.06 241.20 5-7/16″ 78.95 1579.00
    2-3/16″ 12.78 255.60 5-1/2″ 80.78 1615.60
    2-1/4″ 13.52 270.40 5-3/8″ 84.49 1689.80
    2-5/16″ 14.28 285.60 5-3/4″ 88.29 1765.80
    2-3/8″ 15.06 301.20 5-7/8″ 92.17 1843.40
    2-7/16″ 15.87 317.40 5 15/16″ 94.14 1882.80
    2-1/2″ 16.69 333.80 6 96.13 1922.60
    2-9/16″ 17.53 350.60      
    2-5/8″ 18.40 368.00      
    2-11/16″ 19.29 385.80      

     

     

    Cold Finished Hexagons SIZES

    12L14
    Standard Lengths 12′
    Size in Inches Weight Lbs. Per.Ft. Est. Wt 20’ Bar Size in Inches Weight Lbs. Per. Ft. Est. Wt 20’ Bar
    5/8 1.15 13.8 1 1/4 4.60 55.2
    11/16 1.36 16.6 1 5/16 5.07 60.8
    23/32 1.52 18.2 1 3/8 5.57 66.8
    3/4 1.66 19.9 1 7/16 6.09 73.0
    13/16 1.94 23.3 1 1/2 6.63 79.5
    7/8 2.25 27.0 1 5/8 7.78 93.3
    15/16 2.59 31.0 1 11/16 8.39 100.6
    1 2.95 35.4 1 3/4 9.02 108.2
    1 1/16 3.32 39.8 1 13/16 9.67 106.0
    1 1/8 3.73 44.7 1 7/8 10.35 124.2
    1 3/16 4.15 49.8 2 11.78 141.3

     

     

    COLD FINISHED SQUARE BAR SIZES

     
    C1018
    Standard Lengths 10′-12′
    Size in Inches Weight Lbs. Per. Ft. Est. Wt 20’ Bar Size in Inches Weight Lbs. Per. Ft. Est. Wt 20’ Bar
    1/4 .213 2.5 1 1/16 3.811 45.7
    5/16 .332 4.0 1 1/8 4.306 51.7
    3/8 .478 5.7 1 3/16 4.798 57.6
    7/16 .651 7.8 1 1/4 5.316 64.0
    1/2 .850 10.2 1 5/16 5.861 70.3
    9/16 1.076 12.9 1 3/8 6.432 77.2
    5/8 1.329 15.9 1 7/16 7.030 84.4
    11/16 1.608 19.3 1 1/2 7.655 91.9
    3/4 1.914 22.9 1 5/8 8.984 107.8
    13/16 2.246 27.0 1 3/4 10.419 125.0
    7/8 2.605 31.2 1 7/8 11.95 143.4
    15/16 2.990 35.9 2 13.60 163.2
    1 3.402 40.8

    If you don’t see what you’re looking for just call one of our team members at +91-22-6659 5285 Or Mail Us inquiry@raajsagarsteels.com. No inquiry is too large or too small, we specialize in locating hard to find items. If you do see what you are looking, we would love to assist you and give you a quote today!

    24 Hrs. Online Whatsapp Number   Contact Person: Mr. Milap Mehta - Cell: +91-9869 532 584

    Quick Enquiry

     

    Our Overseas Sales Distributors

    India, United Arab Emirates, Kenya, Qatar, USA, Malaysia, South Korea, Indonesia, Singapore, UK, Bangladesh, Japan, China, Thailand, Taiwan, Italy, Iran, Vietnam, Poland, Egypt, Canada, Turkey, Sri Lanka, Pakistan, Saudi Arabia, Kuwait, Russia, Nigeria, France, Denmark, Germany, Greece, Ukraine, Oman, Switzerland, South Africa, Romania, Colombia, Iraq, Australia, Netherlands, Portugal, Spain, Brazil, Norway, Paraguay, Azerbaijan, Trinidad & Tobago, Mexico, Hong Kong, Philippines, Tunisia, Bahrain, Serbia, Belarus, Houston Tx, Salt Lake City, Texas Tx, Billings Mt, Denver, San Antonio, Pittsburgh Pa, Columbus Ohio, Alberta, Aberdeen, Adelaide, Brisbane, Beaumont Tx, Bristol, Baton Rouge, Birmingham, Baltimore Md, Belfast, Bradford, Calgary, Cape Town, California, Chicago, Chennai, Dublin, Durban, Dallas Tx, Dubai, Doncaster, Derby, Dundee, Dandenong, Edmonton, Europe, Edinburgh, Eugene Or, Exeter, Estevan, Edmonton, Eugene Oregon, Fort Mcmurray, Fresno Ca, Florida, Fargo Nd, Mumbai, Chennai, Gauteng, Glasgow, Greensboro Nc, Greenville Sc, Great Yarmouth, Gloucester, Georgia

    Gold Coast, Guildford, Hamilton, Halifax, Hawaii, Huntingdon, Horsham, Holland, Hereford, Hull, Dubai, Pune, Johannesburg, Jacksonville Fl, Jackson Ms, Jacksonville Fl, Jonesboro Ar, Jackson Tn, Joliet Il Illinois , Joplin Mo Missouri , Kansas City, Kamloops, Kelowna, Knoxville Tn Tennessee, Kuala Lumpur, Missouri, Knoxville Tn, London, Leeds, Liverpool, Los Angeles, Las Vegas, Lancaster Pa, Louisiana, Melbourne, Massachusetts, Manchester, Medford Oregon, Michigan, Middlesbrough, Mississauga, Minnesota, New Jersey, Northern Ireland, Newcastle, Newark (Nj), Nashville Tn, Newfoundland, North Carolina Nc, Nashville, Ontario, Oregon, Ottawa, Okc Oklahoma, Ohio, Oklahoma, Oxford, Ogden Utah, Orlando Fl, Perth, Port Elizabeth, Queensland, Rochester Ny, Richmond Va, Rathcoole, Red Deer Alberta, Reno, Regina, Seattle Wa, Sydney, Saskatoon, Scotland, San Diego, Southampton, Tulsa Ok, Toronto, Tucson, Townsville, Tulsa, Teesside, Tacoma Wa, Tampa, Toowoomba, Utah, Usa, Utah, Vancouver, Victoria Bc, Ventura Ca, Victoria Tx, Washington State, Witbank, West Midlands, Wichita Ks, Winnipeg, Warrington, Washington Pa, Williston Nd, Yuma Az, York Pa, Youngstown Ohio, New York, Buffalo New York, Zambia, New Zealand Nz