Din Washer Dimensions | Specifications | Weight Chart
Din Washers Dimensions | Din Washer Specifications | Din Washer Weight Chart
DIN Tab Washers Specifications / DIN Flat Washer Manufacturer & Suppliers Mumbai, India DIN Square Washer Dimensions, Din Lock Washer Weight Chart & Din Material Specification & Tolerances
Table of Content
Din 93 Washers Dimensions, Din 93 Lock Washer, 93 Tab Washer Weight Chart & 93 Washer Material Specification & Tolerances / 93 Washer Specifications / Din 93 Lock Washer, 93 Tab Washer Manufacturer
DIN 93 Specifications
All measurements in millimeters (mm)
| d1 | used for | d2 | b | h | s |
|---|---|---|---|---|---|
| 3.2 | M3 | 12 | 4 | 13 | 0.38 |
| 4.3 | M4 | 14 | 5 | 14 | 0.38 |
| 5.3 | M5 | 17 | 6 | 16 | 0.5 |
| 6.4 | M6 | 19 | 7 | 18 | 0.5 |
| 8.4 | M8 | 22 | 8 | 20 | 0.75 |
| 10.5 | M10 | 26 | 10 | 22 | 0.75 |
| 13 | M12 | 30 | 12 | 28 | 1 |
| 15 | M14 | 33 | 12 | 28 | 1 |
| 17 | M16 | 36 | 15 | 32 | 1 |
| 19 | M18 | 40 | 18 | 36 | 1 |
| 21 | M20 | 42 | 18 | 36 | 1 |
| 23 | M22 | 50 | 20 | 42 | 1 |
| 25 | M24 | 50 | 20 | 42 | 1 |
| 28 | M27 | 58 | 23 | 48 | 1.6 |
| 31 | M30 | 63 | 26 | 52 | 1.6 |
| 34 | M33 | 68 | 28 | 56 | 1.6 |
| 37 | M36 | 75 | 30 | 60 | 1.6 |
| 40 | M39 | 82 | 32 | 64 | 1.6 |
| 43 | M42 | 88 | 35 | 70 | 1.6 |
| 50 | M48 | 100 | 40 | 80 | 1.6 |
| 54 | M52 | 105 | 44 | 85 | 1.6 |
*All information is strictly informative
DIN 93 - Slices with a cloth (lock washers)
Equivalent norms: CSN 21751; PN 82021; UNI 6600
| Legend: d1 - Inner diameter d2 - Outer diameter S - Washer width r - radius b - tab width l - distance from the axis | Makings: Steel: steel Stainless: A2, A4 Plastic: - Non Ferrous: Brass Thread: - |
Table according to DIN 93: dimensions in mm
| d* | d1 H13 | d2 h13 | b h14 | l | s |
| M4 | 4,3 | 14 | 5 | 14 | 0,38 |
| M5 | 5,3 | 17 | 6 | 16 | 0,5 |
| M6 | 6,4 | 19 | 7 | 18 | 0,5 |
| M8 | 8,4 | 22 | 8 | 20 | 0,75 |
| M10 | 10,5 | 26 | 10 | 22 | 0,75 |
| M12 | 13,0 | 30 | 12 | 28 | 1 |
| M14 | 15,0 | 33 | 12 | 28 | 1 |
| M16 | 17,0 | 36 | 15 | 32 | 1 |
| M18 | 19,0 | 40 | 18 | 36 | 1 |
| M20 | 21,0 | 42 | 18 | 36 | 1 |
| M22 | 23,0 | 50 | 20 | 42 | 1 |
| M24 | 25,0 | 50 | 20 | 42 | 1 |
| M27 | 28,0 | 58 | 23 | 48 | 1,6 |
| M30 | 31,0 | 63 | 26 | 52 | 1,6 |
| M33 | 34,0 | 68 | 28 | 56 | 1,6 |
| M36 | 37,0 | 75 | 30 | 60 | 1,6 |
| M39 | 40,0 | 82 | 32 | 64 | 1,6 |
Din 93 Lock Washer, Din 93 Tab Washers Dimensions, Weight Chart & Material Specification & Tolerances / Din 93 Tab Washer Manufacturer & Suppliers Mumbai, India
Weights for DIN 93
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
| Size | Weight |
|---|---|
| M3 | 0.368 |
| M3.5 | 0.356 |
| M4 | 0.487 |
| M5 | 1.05 |
| M6 | 1.21 |
| M7 | 1.17 |
| M8 | 2.32 |
| M10 | 3.13 |
| M12 | 6.00 |
| M14 | 7.00 |
| M16 | 8.50 |
| M18 | 11.0 |
| M20 | 11.0 |
| M22 | 14.8 |
| M24 | 14.2 |
| M27 | 31.0 |
| M30 | 36.3 |
| M33 | 42.0 |
| M36 | 51.3 |
| M39 | 59.7 |
| M42 | 69.5 |
| M45 | 81.2 |
| M48 | 89.0 |
| M52 | 98.0 |
*All information is strictly informative
8.4, M10/ M6, M5 Din 125 Washers Dimensions, Weight Chart & Din 125 Washer Material Specification & Tolerances
DIN 125 Specifications
All measurements in millimeters (mm)
| d1 | for thread size | d2 | s |
|---|---|---|---|
| 1.7 | M1.6 | 4 | 0.3 |
| 2.2 | M2 | 5 | 0.3 |
| 2.7 | M2.5 | 6 | 0.5 |
| 3.2 | M3 | 7 | 0.5 |
| 3.7 | M3.5 | 8 | 0.5 |
| 4.3 | M4 | 9 | 0.8 |
| 5.3 | M5 | 10 | 1 |
| 6.4 | M6 | 12 | 1.6 |
| 7.4 | M7 | 14 | 1.6 |
| 8.4 | M8 | 16 | 1.6 |
| 10.5 | M10 | 20 | 2 |
| 13 | M12 | 24 | 2.5 |
| 15 | M14 | 28 | 2.5 |
| 17 | M16 | 30 | 3 |
| 19 | M18 | 34 | 3 |
| 21 | M20 | 37 | 3 |
| 23 | M22 | 39 | 3 |
| 25 | M24 | 44 | 4 |
| 28 | M27 | 50 | 4 |
| 31 | M30 | 56 | 4 |
| 34 | M33 | 60 | 5 |
| 37 | M36 | 66 | 5 |
| 40 | M39 | 72 | 6 |
| 43 | M42 | 78 | 7 |
| 50 | M48 | 92 | 8 |
| 54 | M52 | 98 | 8 |
*All information is strictly informative
DIN 125 / ISO 7089, 7090 FLAT WASHER A2/A4 STAINLESS
Flat Washers - Steel
Without Chamfer
W010 – 125A Bare Steel
W012 – 125A Zinc Plated
W019 – 125A 200HV Hardened
W019-Z – 125A 200HV Hardened Zinc
DIN 125A - ISO 7089 / 7090
| For Screw | d1 min | d2 max | s | Bare | Zinc | 200HV | 200HV (Zinc) | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Pkg. | Order # | Pkg. | Order # | Pkg. | Order # | Pkg. | Order # | ||||
| M1.6 | 1.7 | 4 | 0.3 | 100 | W012-1.6-0000 | ||||||
| M2 | 2.2 | 5 | 0.3 | 100 | W012-002-0000 | ||||||
| M2.5 | 2.7 | 6 | 0.5 | 100 | W012-2.5-0000 | ||||||
| M2.6 | 2.8 | 7 | 0.5 | 100 | W012-2.6-0000 | ||||||
| M3 | 3.2 | 7 | 0.5 | 100 | W012-003-0000 | ||||||
| M3.5 | 3.7 | 8 | 0.5 | 100 | W012-3.5-0000 | ||||||
| M4 | 4.3 | 9 | 0.8 | 100 | W010-004-0000 | 100 | W012-004-0000 | 100 | W019-004-0000 | 100 | W019-004-0000-Z |
| M5 | 5.3 | 10 | 1 | 100 | W010-005-0000 | 100 | W012-005-0000 | 100 | W019-005-0000 | 100 | W019-005-0000-Z |
| M6 | 6.4 | 12 | 1.6 | 100 | W010-006-0000 | 100 | W012-006-0000 | 100 | W019-006-0000 | 100 | W019-006-0000-Z |
| M7 | 7.4 | 14 | 1.6 | 100 | W010-007-0000 | 100 | W012-007-0000 | ||||
| M8 | 8.4 | 16 | 1.6 | 100 | W010-008-0000 | 100 | W012-008-0000 | 100 | W019-008-0000 | 100 | W019-008-0000-Z |
| M10 | 10.5 | 20 | 2 | 100 | W010-010-0000 | 100 | W012-010-0000 | 100 | W019-010-0000 | 100 | W019-010-0000-Z |
| M12 | 13 | 24 | 2.5 | 100 | W010-012-0000 | 100 | W012-012-0000 | 100 | W019-012-0000 | 100 | W019-012-0000-Z |
| M14 | 15 | 28 | 2.5 | 100 | W010-014-0000 | 100 | W012-014-0000 | 100 | W019-014-0000 | 100 | W019-014-0000-Z |
| M16 | 17 | 30 | 3 | 100 | W010-016-0000 | 100 | W012-016-0000 | 100 | W019-016-0000 | ||
| M18 | 19 | 34 | 3 | 100 | W010-018-0000 | 100 | W012-018-0000 | 100 | W019-018-0000 | ||
| M20 | 21 | 37 | 3 | 100 | W010-020-0000 | 100 | W012-020-0000 | 100 | W019-020-0000 | ||
| M22 | 23 | 39 | 3 | 100 | W010-022-0000 | 100 | W012-022-0000 | ||||
| M24 | 25 | 44 | 4 | 50 | W010-024-0000 | 50 | W012-024-0000 | 50 | W019-024-0000 | ||
| M27 | 28 | 50 | 4 | 50 | W010-027-0000 | 50 | W012-027-0000 | ||||
| M30 | 31 | 56 | 4 | 50 | W010-030-0000 | 50 | W012-030-0000 | ||||
| M33 | 34 | 60 | 5 | 25 | W010-033-0000 | 25 | W012-033-0000 | ||||
| M36 | 37 | 66 | 5 | 25 | W010-036-0000 | 25 | W012-036-0000 | ||||
| M39 | 40 | 72 | 6 | 1 | W010-039-0000 | ||||||
| M42 | 43 | 78 | 7 | 1 | W010-042-0000 | ||||||
| M45 | 46 | 85 | 7 | 1 | W010-045-0000 | ||||||
| M48 | 50 | 92 | 8 | 1 | W010-048-0000 | ||||||
| M52 | 54 | 98 | 8 | 1 | W010-052-0000 | ||||||
| M56 | 58 | 105 | 9 | 1 | W010-056-0000 | ||||||
Flat Washers
A2 / A4 Stainless
Form “A”
W030 – 125A-A2
W031 – 125A-A4
| M2 | 2.2 | 5 | 0.3 | 100 | W030-002-0000 | 100 | W031-002-0000 |
| M2.5 | 2.7 | 6.5 | 0.5 | 100 | W030-2.5-0000 | 100 | W031-2.5-0000 |
| M3 | 3.2 | 7 | 0.5 | 100 | W030-003-0000 | 100 | W031-003-0000 |
| M4 | 4.3 | 9 | 0.8 | 100 | W030-004-0000 | 100 | W031-004-0000 |
| M5 | 5.3 | 10 | 1 | 100 | W030-005-0000 | 100 | W031-005-0000 |
| M6 | 6.4 | 12 | 1.6 | 100 | W030-006-0000 | 100 | W031-006-0000 |
| M7 | 7.4 | 14 | 1.6 | 100 | W031-007-0000 | ||
| M8 | 8.4 | 16 | 1.6 | 100 | W030-008-0000 | 100 | W031-008-0000 |
| M10 | 10.5 | 20 | 2 | 100 | W030-010-0000 | 100 | W031-010-0000 |
| M12 | 13 | 24 | 2.5 | 100 | W030-012-0000 | 100 | W031-012-0000 |
| M14 | 15 | 28 | 2.5 | 100 | W030-014-0000 | 100 | W031-014-0000 |
| M16 | 17 | 30 | 3 | 100 | W030-016-0000 | 50 | W031-016-0000 |
| M18 | 19 | 34 | 3 | 100 | W030-018-0000 | 50 | W031-018-0000 |
| M20 | 21 | 37 | 3 | 100 | W030-020-0000 | 50 | W031-020-0000 |
| M22 | 23 | 39 | 3 | 50 | W030-022-0000 | 50 | W031-022-0000 |
| M24 | 25 | 44 | 4 | 25 | W030-024-0000 | 25 | W031-024-0000 |
| M27 | 28 | 50 | 4 | 25 | W030-027-0000 | 25 | W031-027-0000 |
| M30 | 31 | 56 | 4 | 25 | W030-030-0000 | 25 | W031-030-0000 |
| M33 | 34 | 60 | 5 | 1 | W030-033-0000 | 1 | W031-033-0000 |
| M36 | 37 | 66 | 5 | 1 | W030-036-0000 | 1 | W031-036-0000 |
Weights for DIN 125 Washer, DIN 125 Metric Flat Washer Material Dimensions & Specification & Tolerances / DIN 125 Washer Manufacturer & Suppliers Mumbai, India
Weights for DIN 125
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
| Size | Weight |
|---|---|
| M1.6 | 0.024 |
| M1.7 | 0.031 |
| M2 | 0.037 |
| M2.3 | 0.092 |
| M2.5 | 0.088 |
| M2.6 | 0.127 |
| M3 | 0.119 |
| M3.5 | 0.155 |
| M4 | 0.308 |
| M5 | 0.443 |
| M6 | 1.02 |
| M7 | 1.39 |
| M8 | 1.83 |
| M10 | 3.57 |
| M12 | 6.27 |
| M14 | 8.62 |
| M16 | 11.3 |
| M18 | 14.7 |
| M20 | 17.2 |
| M22 | 18.3 |
| M24 | 32.3 |
| M26 | 43.7 |
| M27 | 42.3 |
| M28 | 40.9 |
| M30 | 53.6 |
| M32 | 77.4 |
| M33 | 75.3 |
| M35 | 94.3 |
| M36 | 92.1 |
| M38 | 136 |
| M39 | 133 |
| M40 | 130 |
| M42 | 183 |
| M45 | 220 |
| M48 | 294 |
| M50 | 284 |
| M52 | 330 |
| M55 | 431 |
| M56 | 425 |
| M58 | 472 |
| M60 | 458 |
| M64 | 492 |
| M68 | 586 |
| M72 | 626 |
| M76 | 749 |
*All information is strictly informative
Din En 126, Plain washers, Iso 7091, Din 126 Material, 126 M6, 126 M3, 126 M5, 126 M16 Material Specification & Tolerances / Specifications / 126 Flat Washer Manufacturer & Suppliers
DIN 126 Specifications
DIN126 Round Flat Washer - product drawing -d1=ID, d2=OD, s=thickness
All measurements in millimeters (mm)
| d1 | used for | d2 | s |
|---|---|---|---|
| 5.5 | M5 | 10 | 1 |
| 6.6 | M6 | 12 | 1.6 |
| 7.6 | M7 | 14 | 1.6 |
| 9 | M8 | 16 | 1.6 |
| 11 | M10 | 20 | 2 |
| 13.5 | M12 | 24 | 2.5 |
| 15.5 | M14 | 28 | 2.5 |
| 17.5 | M16 | 30 | 3 |
| 22 | M20 | 37 | 3 |
| 26 | M24 | 44 | 4 |
| 30 | M27 | 50 | 4 |
| 33 | M30 | 56 | 4 |
| 36 | M33 | 60 | 5 |
| 39 | M36 | 66 | 5 |
| 42 | M39 | 72 | 6 |
| 45 | M42 | 78 | 7 |
| 48 | M45 | 85 | 7 |
| 52 | M48 | 92 | 8 |
| 56 | M52 | 98 | 8 |
| 62 | M56 | 105 | 9 |
| 66 | M60 | 110 | 9 |
| 70 | M64 | 115 | 9 |
*All information is strictly informative
Weights for DIN 126 Washer, DIN 126 Plain Flat Washer Material Dimensions & Specification & Tolerances / DIN 126 Washer Manufacturer & Suppliers Mumbai, India
Weights for DIN 126
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
| Size | Weight |
|---|---|
| M1.6 | 0.024 |
| M1.7 | 0.031 |
| M2 | 0.037 |
| M2.3 | 0.092 |
| M2.5 | 0.088 |
| M2.6 | 0.127 |
| M3 | 0.119 |
| M3.5 | 0.155 |
| M4 | 0.308 |
| M5 | 0.443 |
| M6 | 1.02 |
| M7 | 1.39 |
| M8 | 1.83 |
| M10 | 3.57 |
| M12 | 6.27 |
| M14 | 8.62 |
| M16 | 11.3 |
| M18 | 14.7 |
| M20 | 17.2 |
| M22 | 18.3 |
| M24 | 32.3 |
| M26 | 43.7 |
| M27 | 42.3 |
| M28 | 40.9 |
| M30 | 53.6 |
| M32 | 77.4 |
| M33 | 75.3 |
| M35 | 94.3 |
| M36 | 92.1 |
| M38 | 136 |
| M39 | 133 |
| M40 | 130 |
| M42 | 183 |
| M45 | 220 |
| M48 | 294 |
| M50 | 284 |
| M52 | 330 |
| M55 | 431 |
| M56 | 425 |
| M58 | 472 |
| M60 | 458 |
| M64 | 492 |
| M68 | 586 |
| M72 | 626 |
| M76 | 749 |
*All information is strictly informative
Din 127 Washers Dimensions, Din 127 Washer Material Weight Chart & Specification & Tolerances / Specifications / Din 127 Lock Washer Manufacturer & Suppliers
DIN 127 Specifications
All measurements in millimeters (mm)
| d1 | for screw size | d2 | s |
|---|---|---|---|
| 2.1 | M2 | 4.4 | 0.5 |
| 2.6 | M2.5 | 5.1 | 0.6 |
| 3.1 | M3 | 6.2 | 0.8 |
| 3.6 | M3.5 | 6.7 | 0.8 |
| 4.1 | M4 | 7.6 | .09 |
| 5.1 | M5 | 9.2 | 1.2 |
| 6.1 | M6 | 11.8 | 1.6 |
| 8.1 | M8 | 14.8 | 2 |
| 10.2 | M10 | 18.1 | 2.2 |
| 12.2 | M12 | 21.1 | 2.5 |
| 14.2 | M14 | 24.1 | 3 |
| 16.2 | M16 | 27.4 | 3.5 |
| 18.2 | M18 | 29.4 | 3.5 |
| 20.2 | M20 | 33.6 | 4 |
| 22.5 | M22 | 35.9 | 4 |
| 24.5 | M24 | 40 | 5 |
| 27.5 | M27 | 43 | 5 |
| 30.5 | M30 | 48.2 | 6 |
| 33.5 | M33 | 55.2 | 6 |
| 36.5 | M36 | 58.2 | 6 |
| 39 | M38 | 61.2 | 6 |
| 42.5 | M42 | 68.2 | 7 |
| 45.5 | M45 | 71.2 | 7 |
| 49 | M48 | 75 | 7 |
| 53 | M52 | 86 | 8 |
*All information is strictly informative
DIN 127 A - Spring lock washers, Form A
Equivalent norms: CSN 21741; UNI 1751
| Legend: d1 - Inner diameter d2 - Outer diameter S - Washer width h - unloaded washer height r - radius b - side length k - tooth height | Makings: Steel: steel Stainless: A2, A4 Plastic: - Non Ferrous: Bronze Thread: - |
Table according to DIN 127: dimensions in mm
| Size | For thread | d1 min. | d1 max. | d2 max. | b | s | h min. | h max. | k | r | Weight kg /1000pcs |
| 3 | M3 | 3,1 | 3,4 | 6,2 | 1,3 ± 0,1 | 0,8 ± 0,1 | 1,9 | 2,1 | 0,15 | 0,2 | 0,11 |
| 3,5 | M3,5 | 3,6 | 3,9 | 6,7 | 1,3 ± 0,1 | 0,8 ± 0,1 | 1,9 | 2,2 | 0,15 | 0,2 | 0,12 |
| 4 | M4 | 4,1 | 4,4 | 7,6 | 1,5 ± 0,1 | 0,9 ± 0,1 | 2,1 | 2,5 | 0,15 | 0,2 | 0,18 |
| 5 | M5 | 5,1 | 5,4 | 9,2 | 1,8 ± 0,1 | 1,2 ± 0,1 | 2,7 | 3,2 | 0,15 | 0,2 | 0,36 |
| 6 | M6 | 6,4 | 6,5 | 11,8 | 2,5 ± 0,15 | 1,6 ± 0,1 | 3,6 | 4,2 | 0,2 | 0,3 | 0,83 |
| 7 | M7 | 7,1 | 7,5 | 12,8 | 2,5 ± 0,15 | 1,6 ± 0,1 | 3,6 | 4,2 | 0,2 | 0,3 | 0,93 |
| 8 | M8 | 8,1 | 8,5 | 14,8 | 3 ± 0,15 | 2 ± 0,1 | 4,6 | 5,4 | 0,3 | 0,3 | 1,6 |
| 10 | M10 | 10,2 | 10,7 | 18,1 | 3,5 ± 0,2 | 2,2 ± 0,15 | 5 | 5,9 | 0,3 | 0,5 | 2,53 |
| 12 | M12 | 12,2 | 12,7 | 21,1 | 4 ± 0,2 | 2,5 ± 0,15 | 5,8 | 6,8 | 0,4 | 1 | 3,82 |
| 14 | M14 | 14,2 | 14,7 | 24,1 | 4,5 ± 0,2 | 3 ± 0,15 | 6,8 | 8 | 0,4 | 1 | 6,01 |
| 16 | M16 | 16,2 | 17 | 27,4 | 5 ± 0,2 | 3,5 ± 0,2 | 7,8 | 9,2 | 0,4 | 1 | 8,91 |
| 18 | M18 | 18,2 | 19 | 29,4 | 5 ± 0,2 | 3,5 ± 0,2 | 7,8 | 9,2 | 0,4 | 1 | 9,73 |
| 20 | M20 | 20,2 | 21,2 | 33,6 | 6 ± 0,2 | 4 ± 0,2 | 8,8 | 10,4 | 0,4 | 1 | 15,2 |
| 22 | M22 | 22,5 | 23,5 | 35,9 | 6 ± 0,2 | 4 ± 0,2 | 8,8 | 10,4 | 0,4 | 1 | 16,5 |
| 24 | M24 | 24,5 | 25,5 | 40 | 7 ± 0,25 | 5 ± 0,2 | 11 | 13 | 0,5 | 1,6 | 26,2 |
| 27 | M27 | 27,5 | 28,5 | 43 | 7 ± 0,25 | 5 ± 0,2 | 11 | 13 | 0,5 | 1,6 | 28,7 |
| 30 | M30 | 30,5 | 31,7 | 48,2 | 8 ± 0,25 | 6 ± 0,2 | 13,6 | 16,1 | 0,8 | 1,6 | 44,3 |
| 36 | M36 | 36,5 | 37,7 | 58,2 | 10 ± 0,25 | 6 ± 0,2 | 13,6 | 16,1 | 0,8 | 1,6 | 67,3 |
| 39 | M39 | 39,5 | 40,7 | 61,2 | 10 ± 0,25 | 6 ± 0,2 | 13,6 | 16,1 | 0,8 | 1,6 | 71,7 |
| 42 | M42 | 42,5 | 43,7 | 66,2 | 12 ± 0,25 | 7 ± 0,25 | 15,6 | 18,4 | 0,8 | 2 | 111 |
| 45 | M45 | 45,5 | 46,7 | 71,2 | 12 ± 0,25 | 7 ± 0,25 | 15,6 | 18,4 | 0,8 | 2 | 117 |
| 48 | M48 | 49 | 50,6 | 75 | 12 ± 0,25 | 7 ± 0,25 | 15,6 | 18,4 | 1 | 2 | 123 |
| 52 | M52 | 53 | 54,6 | 83 | 14 ± 0,25 | 8 ± 0,25 | 18 | 21,2 | 1 | 2 | 162 |
| 56 | M56 | 57 | 58,5 | 87 | 14 ± 0,25 | 8 ± 0,25 | 18 | 21,2 | 1 | 2 | 193 |
| 60 | M60 | 61 | 62,5 | 91 | 14 ± 0,25 | 8 ± 0,25 | 18 | 21,2 | 1 | 2 | 203 |
| 64 | M64 | 65 | 66,5 | 95 | 14 ± 0,25 | 8 ± 0,25 | 18 | 21,2 | 1 | 2 | 218 |
| 68 | M68 | 69 | 70,5 | 99 | 14 ± 0,25 | 8 ± 0,25 | 18 | 21,2 | 1 | 2 | 228 |
| 72 | M72 | 73 | 74,5 | 103 | 14 ± 0,25 | 8 ± 0,25 | 18 | 21,2 | 1 | 2 | 240 |
| 80 | M80 | 81 | 82,5 | 111 | 14 ± 0,25 | 8 ± 0,25 | 18 | 21,2 | 1 | 2 | 262 |
| 90 | M90 | 91 | 92,5 | 121 | 14 ± 0,25 | 8 ± 0,25 | 18 | 21,2 | 1 | 2 | 290 |
| 100 | M100 | 101 | 102,5 | 131 | 14 ± 0,25 | 8 ± 0,25 | 18 | 21,2 | 1 | 2 | 318 |
din 127 B - Spring lock washers, Form B
Equivalent norms: DIN 127 B; CSN 21741; UNI 1751
| Makings: Steel: spring steel Stainless: A2,A4 Plastic: - Non Ferrous: - Thread: - | Legend: d1 - Inner diameter d2 - Outer diameter S - Washer width h - unloaded washer height r - radius b - side length |
Table according to DIN 127: dimensions in mm
| Size | For thread | d1 min. | d1 max. | d2 max. | b | s | h min. | h max. | r | Weight kg /1000pcs |
| 2 | M2 | 2,1 | 2,4 | 4,4 | 0,9 ± 0,1 | 0,5 ± 0,1 | 1 | 1,2 | 0,1 | 0,033 |
| 2,2 | M2,2 | 2,3 | 2,6 | 4,8 | 1 ± 0,1 | 0,6 ± 0,1 | 1,2 | 1,4 | 0,1 | 0,05 |
| 2,5 | M2,5 | 2,6 | 2,9 | 5,1 | 1 ± 0,1 | 0,6 ± 0,1 | 1,2 | 1,4 | 0,1 | 0,053 |
| 3 | M3 | 3,1 | 3,4 | 6,2 | 1,3 ± 0,1 | 0,8 ± 0,1 | 1,6 | 1,9 | 0,2 | 0,11 |
| 3,5 | M3,5 | 3,6 | 3,9 | 6,7 | 1,3 ± 0,1 | 0,8 ± 0,1 | 1,6 | 1,9 | 0,2 | 0,12 |
| 4 | M4 | 4,1 | 4,4 | 7,6 | 1,5 ± 0,1 | 0,9 ± 0,1 | 1,8 | 2,1 | 0,2 | 0,18 |
| 5 | M5 | 5,1 | 5,4 | 9,2 | 1,8 ± 0,1 | 1,2 ± 0,1 | 2,4 | 2,8 | 0,2 | 0,36 |
| 6 | M6 | 6,4 | 6,5 | 11,8 | 2,5 ± 0,15 | 1,6 ± 0,1 | 3,2 | 3,8 | 0,3 | 0,83 |
| 7 | M7 | 7,1 | 7,5 | 12,8 | 2,5 ± 0,15 | 1,6 ± 0,1 | 3,2 | 3,8 | 0,3 | 0,93 |
| 8 | M8 | 8,1 | 8,5 | 14,8 | 3 ± 0,15 | 2 ± 0,1 | 4 | 4,7 | 0,3 | 1,6 |
| 10 | M10 | 10,2 | 10,7 | 18,1 | 3,5 ± 0,2 | 2,2 ± 0,15 | 4,4 | 5,2 | 0,5 | 2,53 |
| 12 | M12 | 12,2 | 12,7 | 21,1 | 4 ± 0,2 | 2,5 ± 0,15 | 5 | 5,9 | 1 | 3,82 |
| 14 | M14 | 14,2 | 14,7 | 24,1 | 4,5 ± 0,2 | 3 ± 0,15 | 6 | 7,1 | 1 | 6,01 |
| 16 | M16 | 16,2 | 17 | 27,4 | 5 ± 0,2 | 3,5 ± 0,2 | 7 | 8,3 | 1 | 8,91 |
| 18 | M18 | 18,2 | 19 | 29,4 | 5 ± 0,2 | 3,5 ± 0,2 | 7 | 8,3 | 1 | 9,73 |
| 20 | M20 | 20,2 | 21,2 | 33,6 | 6 ± 0,2 | 4 ± 0,2 | 8 | 9,4 | 1 | 15,2 |
| 22 | M22 | 22,5 | 23,5 | 35,9 | 6 ± 0,2 | 4 ± 0,2 | 8 | 9,4 | 1 | 16,5 |
| 24 | M24 | 24,5 | 25,5 | 40 | 7 ± 0,25 | 5 ± 0,2 | 10 | 11,8 | 1,6 | 26,2 |
| 27 | M27 | 27,5 | 28,5 | 43 | 7 ± 0,25 | 5 ± 0,2 | 10 | 11,8 | 1,6 | 28,7 |
| 30 | M30 | 30,5 | 31,7 | 48,2 | 8 ± 0,25 | 6 ± 0,2 | 12 | 14,2 | 1,6 | 44,3 |
| 36 | M36 | 36,5 | 37,7 | 58,2 | 10 ± 0,25 | 6 ± 0,2 | 12 | 14,2 | 1,6 | 67,3 |
| 39 | M39 | 39,5 | 40,7 | 61,2 | 10 ± 0,25 | 6 ± 0,2 | 12 | 14,2 | 1,6 | 71,7 |
| 42 | M42 | 42,5 | 43,7 | 66,2 | 12 ± 0,25 | 7 ± 0,25 | 14 | 16,5 | 2 | 111 |
| 45 | M45 | 45,5 | 46,7 | 71,2 | 12 ± 0,25 | 7 ± 0,25 | 14 | 16,5 | 2 | 117 |
| 48 | M48 | 49 | 50,6 | 75 | 12 ± 0,25 | 7 ± 0,25 | 14 | 16,5 | 2 | 123 |
| 52 | M52 | 53 | 54,6 | 83 | 14 ± 0,25 | 8 ± 0,25 | 16 | 18,9 | 2 | 162 |
| 56 | M56 | 57 | 58,5 | 87 | 14 ± 0,25 | 8 ± 0,25 | 16 | 18,9 | 2 | 193 |
| 60 | M60 | 61 | 62,5 | 91 | 14 ± 0,25 | 8 ± 0,25 | 16 | 18,9 | 2 | 203 |
| 64 | M64 | 65 | 66,5 | 95 | 14 ± 0,25 | 8 ± 0,25 | 16 | 18,9 | 2 | 218 |
| 68 | M68 | 69 | 70,5 | 99 | 14 ± 0,25 | 8 ± 0,25 | 16 | 18,9 | 2 | 228 |
| 72 | M72 | 73 | 74,5 | 103 | 14 ± 0,25 | 8 ± 0,25 | 16 | 18,9 | 2 | 240 |
| 80 | M80 | 81 | 82,5 | 111 | 14 ± 0,25 | 8 ± 0,25 | 16 | 18,9 | 2 | 262 |
| 90 | M90 | 91 | 92,5 | 121 | 14 ± 0,25 | 8 ± 0,25 | 16 | 18,9 | 2 | 290 |
| 100 | M100 | 101 | 102,5 | 131 | 14 ± 0,25 | 8 ± 0,25 | 16 | 18,9 | 2 | 318 |
DIN 127 Spring Washer, DIN 127 Tab Washers Dimensions, Weight Chart & Material Specification & Tolerances / DIN 127 Tab Washer Manufacturer & Suppliers Mumbai, India
Weights for DIN 127
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
| Size | Weight |
|---|---|
| M2 | 0.033 |
| M2.2 | 0.050 |
| M2.5 | 0.053 |
| M3 | 0.11 |
| M3.5 | 0.12 |
| M4 | 0.18 |
| M5 | 0.36 |
| M6 | 0.83 |
| M7 | 0.93 |
| M8 | 1.60 |
| M10 | 2.53 |
| M12 | 3.82 |
| M14 | 6.01 |
| M16 | 8.91 |
| M18 | 9.73 |
| M20 | 15.2 |
| M22 | 16.5 |
| M24 | 26.2 |
| M27 | 28.7 |
| M30 | 44.3 |
| M36 | 67.3 |
| M39 | 71.7 |
| M42 | 111 |
| M45 | 117 |
| M48 | 123 |
| M52 | 182 |
| M56 | 193 |
| M60 | 203 |
| M64 | 218 |
| M68 | 228 |
*All information is strictly informative
Din 128 Washers Dimensions, Din 128 Washer Weight Chart / Material Specification & Tolerances / Specifications / 128 Lock Washer, 128 Spring Lock Washer M3 & M8 Manufacturer & Suppliers
DIN 128 Specifications
All measurements in millimeters (mm)
| d1 | for screw size | d2 | s | h min | h max |
|---|---|---|---|---|---|
| 2.1 | M2 | 4.4 | 0.5 | 0.7 | 0.9 |
| 2.6 | M2.5 | 5.1 | 0.6 | 0.9 | 1.1 |
| 3.1 | M3 | 6.2 | 0.7 | 1.1 | 1.3 |
| 3.6 | M3.5 | 6.7 | 0.7 | 1.1 | 1.3 |
| 4.1 | M4 | 7.6 | 0.8 | 1.2 | 1.4 |
| 5.1 | M5 | 9.2 | 1 | 1.5 | 1.7 |
| 6.1 | M6 | 11.8 | 1.3 | 2 | 2.2 |
| 8.1 | M8 | 14.8 | 1.6 | 2.45 | 2.75 |
| 10.2 | M10 | 18.1 | 1.8 | 2.85 | 3.15 |
| 12.2 | M12 | 21.1 | 2.1 | 3.35 | 3.65 |
| 14.2 | M14 | 24.1 | 2.4 | 3.9 | 4.3 |
| 16.2 | M16 | 27.4 | 2.8 | 4.5 | 5.1 |
| 18.2 | M17 | 29.4 | 2.8 | 4.5 | 5.1 |
| 20.2 | M20 | 33.6 | 3.2 | 5.1 | 5.9 |
| 22.2 | M21 | 35.9 | 3.2 | 5.1 | 5.9 |
| 24.5 | M24 | 40 | 4 | 6.5 | 7.5 |
| 30.5 | M30 | 48.2 | 6 | 9.5 | 10.5 |
*All information is strictly informative
Weights for DIN 128 Washer, DIN 128 Washer Dimensions & 128 Lock Washer Spring Steel Material Specification & Tolerances/ Weights / DIN 128 Washer Manufacturer & Suppliers Mumbai, India
Weights for DIN 128
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
| Size | Weight |
|---|---|
| M2 | 0.035 |
| M2.5 | 0.055 |
| M3 | 0.09 |
| M3.5 | 0.10 |
| M4 | 0.15 |
| M5 | 0.30 |
| M6 | 0.70 |
| M7 | 0.75 |
| M8 | 1.30 |
| M10 | 2.10 |
| M12 | 3.20 |
| M14 | 4.80 |
| M16 | 7.00 |
| M18 | 7.80 |
| M20 | 12.2 |
| M22 | 13.3 |
| M24 | 21.5 |
| M27 | 23.7 |
| M30 | 42.5 |
| M36 | 68.0 |
*All information is strictly informative
Weights for DIN 137 Washer, DIN 137 Washer Dimensions & Metric 137 Curved & Waved Spring Lock Washers Material Specification & Tolerances/ Weights/ 137 Washer Manufacturer & Suppliers Mumbai, India
Weights for DIN 137
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
| Size | Weight | |
|---|---|---|
| Type A | Type B | |
| M1 | 0.006 | |
| M1.2 | 0.009 | |
| M1.4 | 0.010 | |
| M1.7 | 0.020 | |
| M1.8 | 0.020 | |
| M2 | 0.028 | |
| M2.3 | 0.035 | |
| M2.6 | 0.041 | |
| M3 | 0.063 | 0.166 |
| M3.5 | 0.088 | 0.154 |
| M4 | 0.140 | 0.193 |
| M5 | 0.222 | 0.266 |
| M6 | 0.247 | 0.318 |
| M7 | 0.265 | 0.800 |
| M8 | 0.476 | 0.76 |
| M10 | 1.05 | 2.04 |
| M12 | 3.1 | |
| M14 | 5.5 | |
| M16 | 6.0 | |
| M18 | 7.8 | |
| M20 | 8.43 | |
| M22 | 11.9 | |
| M24 | 14.5 | |
| M27 | 21.1 | |
| M30 | 29.5 | |
*All information is strictly informative
Din 137 B Washer / Din 137 Spring Washer / Din 137 A Curved Spring Washer / Din 137 A Washer / Wave Washer Din 137 B / Wave Washer Din 137/ Din 137a Specifications, Din 137a Washer Standard, Din 137a, 137 Spring Washer, 137 A, 137 A B, 137 A Washer, DIN 137A Spring Washer (Curved) Manufacturer & Suppliers
DIN 137A Specifications
All measurements in millimeters (mm)
| d1 | for screw | d2 | s |
|---|---|---|---|
| 2.2 | M2 | 4.5 | 0.3 |
| 2.8 | M2.5 | 5.5 | 0.3 |
| 3.2 | M3 | 6 | 0.4 |
| 3.7 | M3.5 | 7 | 0.4 |
| 4.3 | M4 | 8 | 0.5 |
| 5.3 | M5 | 10 | 0.5 |
| 6.4 | M6 | 11 | 0.5 |
| 7.4 | M7 | 12 | 0.5 |
| 8.4 | M8 | 15 | 0.5 |
| 10.5 | M10 | 18 | 0.8 |
*All information is strictly informative
Spring Washers
Spring Steel
Form “A” (Curved)
W061 – 137A Zinc Plated
| For Screw | d1 | d2 | s | Pkg. | Order # |
|---|---|---|---|---|---|
| M3 | 3.2 | 6 | 0.4 | 100 | W061-003-0000 |
| M4 | 4.3 | 8 | 0.5 | 100 | W061-004-0000 |
| M5 | 5.3 | 10 | 0.5 | 100 | W061-005-0000 |
| M6 | 6.4 | 11 | 0.5 | 100 | W061-006-0000 |
| M8 | 8.4 | 15 | 0.5 | 100 | W061-008-0000 |
| M10 | 10.5 | 18 | 0.8 | 100 | W061-010-0000 |
Din 137 B Specification, 137b, Din 137 B, 137 B Washer, 137b Specification, 137 B10, 137 B12, 137 B 24, 137 Dimensions, 137b M8, 137 B Washer & 137 B - Spring Wave Washers Manufacturer & Suppliers
DIN 137B Specifications
DIN137B Curved Spring washer - product drawing - d1=ID,d2=OD, s=thickness, h=curve dept
All measurements in millimeters (mm)
| d1 | used for | d2 | s |
|---|---|---|---|
| 3.2 | M3 | 8 | 0.5 |
| 3.7 | M3.5 | 8 | 0.5 |
| 4.3 | M4 | 9 | 0.5 |
| 5.3 | M5 | 11 | 0.5 |
| 6.4 | M6 | 12 | 0.5 |
| 7.4 | M7 | 14 | 0.8 |
| 8.4 | M8 | 15 | 0.8 |
| 10.5 | M10 | 21 | 1 |
| 13 | M12 | 24 | 1.2 |
| 15 | M14 | 28 | 1.6 |
| 17 | M16 | 30 | 1.6 |
| 19 | M18 | 34 | 1.6 |
| 21 | M20 | 36 | 1.6 |
| 23 | M22 | 40 | 1.8 |
| 25 | M24 | 44 | 1.8 |
| 28 | M27 | 50 | 2 |
| 31 | M30 | 56 | 2.2 |
| 34 | M33 | 60 | 2.2 |
| 37 | M36 | 68 | 2.5 |
*All information is strictly informative
din 137 B - Spring Wave Washers, Form B
Equivalent norms: DIN 137 B; CSN 21733; UNI 8840B
| Legend: d1 - Inner diameter d2 - Outer diameter S - Washer width h - unloaded washer height | Makings: Steel: spring steel Stainless: A2,A4 Plastic: - Non Ferrous: - Thread: - |
Table according to DIN 137: dimensions in mm
| Nominal size | For thread | d1 H14 | d2 js16 | s | h min. | h max. | Weight kg/1000pcs |
| 3 | M3 | 3,2 | 8 | 0,5 ± 0,05 | 0,8 | 1,6 | 0,166 |
| 3,5 | M3,5 | 3,7 | 8 | 0,5 ± 0,05 | 0,9 | 1,8 | 0,154 |
| 4 | M4 | 4,3 | 9 | 0,5 ± 0,05 | 1 | 2 | 0,193 |
| 5 | M5 | 5,3 | 11 | 0,5 ± 0,05 | 1,1 | 2,2 | 0,286 |
| 6 | M6 | 6,4 | 12 | 0,5 ± 0,05 | 1,3 | 2,6 | 0,318 |
| 7 | M7 | 7,4 | 14 | 0,8 ± 0,06 | 1,5 | 3 | 0,7 |
| 8 | M8 | 8,4 | 15 | 0,8 ± 0,06 | 1,5 | 3 | 0,762 |
| 10 | M10 | 10,5 | 21 | 1 ± 0,07 | 2,1 | 4,2 | 2,04 |
| 12 | M12 | 13 | 24 | 1,2 ± 0,07 | 2,5 | 5 | 3,01 |
| 14 | M14 | 15 | 28 | 1,6 ± 0,08 | 3 | 6 | 5,51 |
| 16 | M16 | 17 | 30 | 1,6 ± 0,08 | 3,2 | 6,4 | 6,03 |
| 18 | M18 | 19 | 34 | 1,6 ± 0,08 | 3,3 | 6,6 | 7,84 |
| 20 | M20 | 21 | 36 | 1,6 ± 0,08 | 3,7 | 7,4 | 8,43 |
| 22 | M22 | 23 | 40 | 1,8 ± 0,1 | 3,9 | 7,8 | 11,9 |
| 24 | M24 | 25 | 44 | 1,8 ± 0,1 | 4,1 | 8,2 | 14,5 |
| 27 | M27 | 28 | 50 | 2 ± 0,1 | 4,7 | 9,4 | 21,1 |
| 30 | M30 | 31 | 56 | 2,2 ± 0,1 | 5 | 10 | 29,5 |
| 33 | M33 | 34 | 60 | 2,2 ± 0,1 | 5,3 | 10,6 | 33,1 |
| 36 | M36 | 37 | 68 | 2,5 ± 0,15 | 5,8 | 11,6 | 50,2 |
DIN 432 Washers Dimensions, DIN 432 Lock Washer Weight Chart & Material Specification & Tolerances / DIN 432 Washer Manufacturer & Suppliers Mumbai, India
DIN 432 Specifications
All measurements in millimeters (mm)
| d1 | used for | d2 | s | f | g |
|---|---|---|---|---|---|
| M3.2 | M3 | 12 | 0.4 | 2.5 | 4.5 |
| M3.7 | M3 | 12 | 0.4 | 2.5 | 4.5 |
| M4.3 | M4 | 14 | 0.4 | 2.5 | 5.5 |
| M5.3 | M5 | 17 | 0.75 | 3.5 | 7 |
| M6.4 | M6 | 19 | 0.75 | 3.5 | 7.5 |
| M8.4 | M8 | 22 | 1 | 3.5 | 8.5 |
| M10.5 | M10 | 26 | 1 | 4.5 | 10 |
| M13 | M12 | 30 | 1.2 | 4.5 | 12 |
| M15 | M14 | 33 | 1.2 | 4.5 | 13 |
| M17 | M16 | 36 | 1.2 | 5.5 | 15 |
| M19 | M18 | 40 | 1.2 | 6.5 | 18 |
| M21 | M20 | 42 | 1.6 | 6.5 | 18 |
| M23 | M22 | 50 | 1.6 | 6.5 | 20 |
| M25 | M24 | 50 | 1.6 | 7.5 | 21 |
| M28 | M27 | 58 | 1.6 | 8.5 | 23 |
| M31 | M30 | 63 | 1.6 | 8.5 | 25 |
| M34 | M33 | 68 | 1.6 | 9.5 | 28 |
| M37 | M36 | 75 | 2 | 11 | 31 |
| M40 | M39 | 82 | 2 | 11 | 33 |
| M43 | M42 | 88 | 2 | 11 | 36 |
| M46 | M45 | 95 | 2 | 13 | 38 |
| M50 | M48 | 100 | 2 | 13 | 40 |
| M54 | M53 | 105 | 2 | 13 | 42 |
*All information is strictly informative
Weights for DIN 432 Washer, DIN 432 Washer Dimensions & Material Specification & Tolerances / DIN 432 Tab Washer Manufacturer & Suppliers Mumbai, India
Weights for DIN 432
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
| Size | Weight |
|---|---|
| M3 | 0.33 |
| M3.5 | 0.32 |
| M4 | 0.44 |
| M5 | 1.20 |
| M6 | 1.48 |
| M7 | 1.42 |
| M8 | 2.54 |
| M10 | 3.49 |
| M12 | 5.48 |
| M14 | 6.38 |
| M16 | 7.45 |
| M18 | 9.15 |
| M20 | 13.1 |
| M22 | 19.4 |
| M24 | 18.5 |
| M27 | 24.8 |
| M30 | 29.8 |
| M33 | 34.2 |
| M36 | 52.5 |
| M39 | 63.3 |
| M42 | 72.5 |
| M45 | 85.3 |
| M48 | 93 |
*All information is strictly informative
DIN 433 Washers Dimensions, DIN 433 Plain Washer Weight Chart & Material Specification & Tolerances / DIN 433 Washer Manufacturer & Suppliers Mumbai, India
DIN 433 Specifications
All measurements in millimeters (mm)
| d1 | used for | d2 | s |
|---|---|---|---|
| 1.9 | M1.8 | 4 | 0.3 |
| 2.2 | M2 | 4.5 | 0.3 |
| 2.7 | M2.5 | 5 | 0.5 |
| 3.2 | M3 | 6 | 0.5 |
| 3.7 | M3.5 | 7 | 0.5 |
| 4.3 | M4 | 8 | 0.5 |
| 5.3 | M5 | 9 | 1 |
| 6.4 | M6 | 11 | 1.6 |
| 8.4 | M8 | 15 | 1.6 |
| 10.5 | M10 | 18 | 1.6 |
| 13 | M12 | 20 | 2 |
| 15 | M14 | 24 | 2.5 |
| 17 | M16 | 28 | 2.5 |
| 19 | M18 | 30 | 2.5 |
| 21 | M20 | 34 | 3 |
*All information is strictly informative
Weights for DIN 433 Washer, DIN 433 Washer Dimensions & Material Specification & Tolerances / DIN 433 Flat Washer Manufacturer & Suppliers Mumbai, India
Weights for DIN 433
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
| Size | Weight |
|---|---|
| M1 | 0.010 |
| M1.2 | 0.013 |
| M1.4 | 0.012 |
| M1.6 | 0.016 |
| M1.8 | 0.023 |
| M2 | 0.047 |
| M2.5 | 0.055 |
| M3 | 0.080 |
| M3.5 | 0.110 |
| M4 | 0.140 |
| M5 | 0.385 |
| M6 | 0.79 |
| M8 | 1.52 |
| M10 | 2.11 |
| M12 | 2.85 |
| M14 | 4.30 |
| M16 | 5.42 |
| M18 | 8.31 |
| M20 | 9.98 |
*All information is strictly informative
DIN 434 Washers Dimensions, Taper Washer Weight Chart & Material Specification & Tolerances / Din 434 Square Taper Washer / Square Washer & U Washer
DIN 434 Specifications
All measurements in millimeters (mm)
| d1 | used for | a | b | s |
|---|---|---|---|---|
| 9 | M8 | 22 | 22 | 3.8 |
| 11 | M10 | 22 | 22 | 3.8 |
| 14 | M12 | 26 | 30 | 4.9 |
| 18 | M16 | 32 | 36 | 5.9 |
| 22 | M20 | 40 | 44 | 7 |
| 24 | M22 | 44 | 50 | 8 |
| 26 | M24 | 56 | 56 | 8.5 |
| 30 | M27 | 56 | 56 | 8.5 |
| 33 | M30 | 62 | 62 | 9 |
*All information is strictly informative
Weights for 434 Washer, DIN 434 Washer Dimensions & Material Specification & Tolerances / DIN 434 Square Taper Washer Weight / U Washer Din 434 Manufacturer & Suppliers Mumbai, India
Weights for DIN 434
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
| Size | Weight |
|---|---|
| M8 | 9.5 |
| M10 | 8.8 |
| M12 | 18.3 |
| M16 | 31.4 |
| M20 | 57.0 |
| M22 | 82.5 |
| M24 | 128.0 |
| M27 | 119.0 |
*All information is strictly informative
DIN 435 Washers Dimensions, DIN 435 - Square Bevel Washer Weight Chart & 435 Taper Washer Material Specification & Tolerances / DIN 435 Washer Manufacturer & 435 - Square Bevel Washer Suppliers Mumbai, India
DIN 435 Specifications
All measurements in millimeters (mm)
| d1 | used for | a | b | s |
|---|---|---|---|---|
| 9 | M8 | 22 | 22 | 4.6 |
| 11 | M10 | 22 | 22 | 4.6 |
| 14 | M12 | 26 | 30 | 6.2 |
| 18 | M16 | 32 | 36 | 7.5 |
| 22 | M20 | 40 | 44 | 9.2 |
| 24 | M22 | 44 | 50 | 10 |
| 26 | M24 | 56 | 56 | 10.8 |
| 30 | M27 | 56 | 56 | 10.8 |
| 33 | M30 | 62 | 62 | 11.7 |
*All information is strictly informative
Weights for DIN 435 Washer, DIN 435 Washer Dimensions & DIN 435 Square Bevel / Taper Washer Material Specification & TolerancesWeights For DIN 435 Washer / Weights For DIN 435 Washer / DIN 435 Washer Manufacturer & Suppliers Mumbai, India
Weights for DIN 435
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
| Size | Weight |
|---|---|
| M8 | 10.1 |
| M10 | 9.4 |
| M12 | 20.1 |
| M16 | 35.6 |
| M20 | 67 |
| M22 | 90 |
| M24 | 143 |
| M27 | 133 |
All information is strictly informative
DIN 436 Washers Dimensions, DIN 436 Square Washer Weight Chart & Material Specification & Tolerances / DIN 436 Washer Manufacturer & Suppliers Mumbai, India
DIN 436 Specifications
All measurements in millimeters (mm)
| d1 | for screw | a | s |
|---|---|---|---|
| 9 | M8 | – | – |
| 11 | M10 | 30 | 3 |
| 13.5 | M12 | 40 | 4 |
| 17.5 | M16 | 50 | 5 |
| 22 | M20 | 60 | 5 |
| 24 | M22 | 70 | 6 |
| 26 | M24 | 80 | 6 |
| 30 | M27 | 90 | 6 |
| 33 | M30 | 95 | 6 |
| 36 | M35 | 100 | 6 |
| 39 | M38 | 110 | 8 |
| 42 | M41 | 125 | 8 |
| 45 | M44 | 135 | 8 |
| 48 | M47 | 140 | 8 |
| 52 | M51 | 150 | 10 |
| 56 | M55 | 160 | 10 |
*All information is strictly informative
DIN 462 Washers Dimensions, DIN 462 Tab Washer Weight Chart & Material Specification & Tolerances / DIN 462 Washer Manufacturer & Suppliers Mumbai, India
DIN 462 Specifications
All measurements in millimeters (mm)
| d1 | d2 | s | b | h | c |
|---|---|---|---|---|---|
| M8 | 20 | 0.8 | 3 | 5.9 | 2.5 |
| M10 | 25 | 0.8 | 4 | 7.4 | 3 |
| M12 | 28 | 0.8 | 5 | 9.3 | 3 |
| M14 | 39 | 0.8 | 5 | 11.4 | 3 |
| M16 | 32 | 1 | 5 | 13.5 | 3 |
| M18 | 34 | 1 | 6 | 15.4 | 4 |
| M20 | 36 | 1 | 6 | 17.5 | 4 |
| M22 | 40 | 1 | 6 | 19.5 | 4 |
| M24 | 42 | 1 | 6 | 21.6 | 4 |
| M26 | 45 | 1 | 7 | 23.5 | 5 |
| M28 | 50 | 1 | 7 | 25.5 | 5 |
| M30 | 50 | 1.2 | 7 | 27.5 | 5 |
| M32 | 52 | 1.2 | 7 | 29.6 | 5 |
| M35 | 55 | 1.2 | 7 | 32.6 | 5 |
| M38 | 58 | 1.2 | 8 | 35.3 | 5 |
| M40 | 62 | 1.2 | 8 | 37.3 | 5 |
| M42 | 62 | 1.2 | 8 | 39.3 | 5 |
| M45 | 68 | 1.2 | 8 | 42.4 | 5 |
| M48 | 75 | 1.2 | 8 | 45.4 | 5 |
| M50 | 75 | 1.2 | 8 | 47.4 | 5 |
| M52 | 80 | 1.2 | 10 | 49.3 | 6 |
| M55 | 80 | 1.2 | 10 | 52.9 | 6 |
| M58 | 90 | 1.5 | 10 | 55.3 | 6 |
| M60 | 90 | 1.5 | 10 | 57.3 | 6 |
| M62 | 95 | 1.5 | 10 | 59.3 | 6 |
| M65 | 95 | 1.5 | 10 | 62.4 | 6 |
| M68 | 100 | 1.5 | 10 | 65.4 | 6 |
| M70 | 100 | 1.5 | 10 | 67.4 | 6 |
| M72 | 110 | 1.5 | 10 | 68.9 | 7 |
| M75 | 110 | 1.5 | 10 | 71.9 | 7 |
| M80 | 115 | 1.5 | 10 | 76.9 | 7 |
| M85 | 120 | 1.5 | 10 | 81.9 | 7 |
| M90 | 130 | 1.5 | 10 | 86.9 | 7 |
*All information is strictly informative
DIN 463 Washers Dimensions, DIN 463 Washer Weight Chart & Material Specification & Tolerances / DIN 463 Tab Washers Manufacturer & Suppliers Mumbai, India
DIN 463 Specifications
All measurements in millimeters (mm)
| d1 | used for | d2 | h1 | h | b | s |
|---|---|---|---|---|---|---|
| 3.2 | M3 | 7 | 13 | 5 | 4 | 0.38 |
| 4.3 | M4 | 9 | 14 | 6.5 | 5 | 0.38 |
| 5.3 | M5 | 10 | 16 | 8 | 6 | 0.5 |
| 6.4 | M6 | 12.5 | 18 | 9 | 7 | 0.5 |
| 8.4 | M8 | 17 | 20 | 11 | 8 | 0.75 |
| 10.5 | M10 | 21 | 22 | 13 | 10 | 0.75 |
| 13 | M12 | 24 | 28 | 15 | 12 | 1 |
| 15 | M14 | 28 | 28 | 16 | 12 | 1 |
| 17 | M16 | 30 | 32 | 18 | 15 | 1 |
| 21 | M20 | 37 | 36 | 21 | 18 | 1 |
| 25 | M24 | 44 | 42 | 25 | 20 | 1 |
| 28 | M27 | 50 | 48 | 29 | 23 | 1.6 |
| 31 | M30 | 56 | 52 | 32 | 26 | 1.6 |
| 34 | M33 | 60 | 56 | 34 | 28 | 1.6 |
| 37 | M36 | 66 | 60 | 38 | 30 | 1.6 |
*All information is strictly informative
Din 463 Lock Washer, Din 463 Tab Washers Dimensions, Weight Chart & Material Specification & Tolerances / Din 463 Tab Washer Manufacturer & Suppliers Mumbai, India
Weights for DIN 463
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
| Size | Weight |
|---|---|
| M3 | 0.229 |
| M3.5 | 0.251 |
| M4 | 0.327 |
| M5 | 0.55 |
| M6 | 0.8 |
| M8 | 1.71 |
| M10 | 2.51 |
| M12 | 4.41 |
| M14 | 5.09 |
| M16 | 6.3 |
| M18 | 8.24 |
| M20 | 9 |
| M22 | 10 |
| M24 | 12 |
| M27 | 25.3 |
| M30 | 31.4 |
| M33 | 35.6 |
| M36 | 42.5 |
| M39 | 49.7 |
| M42 | 59.2 |
| M45 | 70.3 |
| M48 | 80 |
| M52 | 90.2 |
*All information is strictly informative
DIN 1440 Plain Washers Dimensions, 1440 Flat Washer Weight Chart & Material Specification & Tolerances / DIN 1440 Washer Manufacturer & Suppliers Mumbai, India
DIN 1440 Specifications
All measurements in millimeters (mm)
| d1 | d2 | s |
|---|---|---|
| M3 | 6 | 0.8 |
| M4 | 8 | 0.8 |
| M5 | 10 | 0.8 |
| M6 | 12 | 1.6 |
| M7 | 14 | 1.6 |
| M8 | 16 | 2 |
| M10 | 20 | 2.5 |
| M12 | 25 | 3 |
| M13 | 25 | 3 |
| M14 | 28 | 3 |
| M16 | 28 | 3 |
| M18 | 30 | 4 |
| M20 | 32 | 4 |
| M22 | 34 | 4 |
| M23 | 36 | 4 |
| M25 | 40 | 4 |
| M26 | 40 | 5 |
| M28 | 42 | 5 |
| M30 | 45 | 5 |
| M32 | 50 | 5 |
| M33 | 50 | 5 |
| M35 | 52 | 6 |
| M36 | 52 | 6 |
| M40 | 58 | 6 |
| M45 | 62 | 7 |
| M50 | 68 | 8 |
*All information is strictly informative
DIN 1441 Flat Washers Dimensions, 1441 Plain Washer Weight Chart & Material Specification & Tolerances / 1441 Washer Manufacturer & Suppliers Mumbai, India
DIN 1441 Specifications
All measurements in millimeters (mm)
| d1 | d2 | s |
|---|---|---|
| 5.5 | 10 | 0.8 |
| 7 | 12 | 1.6 |
| 9 | 16 | 2 |
| 11 | 20 | 2.5 |
| 13 | 25 | 3 |
| 15 | 28 | 3 |
| 17 | 28 | 3 |
| 19 | 30 | 4 |
| 21 | 32 | 4 |
| 23 | 34 | 4 |
| 24 | 36 | 4 |
| 25 | 38 | 4 |
| 26 | 40 | 4 |
| 27 | 40 | 5 |
| 28 | 40 | 5 |
| 29 | 42 | 5 |
| 31 | 45 | 5 |
| 34 | 50 | 5 |
| 37 | 52 | 6 |
| 41 | 58 | 6 |
| 46 | 62 | 7 |
| 51 | 68 | 8 |
| 56 | 75 | 9 |
| 62 | 80 | 9 |
| 68 | 90 | 9 |
| 72 | 95 | 10 |
*All information is strictly informative
DIN 1052 Plain Washers Dimensions, DIN 1052 Flat Washer Weight Chart & Material Specification & Tolerances / DIN 1052 Washer Manufacturer & Suppliers Mumbai, India
DIN 1052 Specifications
All measurements in millimeters (mm)
| d1 | used for | d2 | s |
|---|---|---|---|
| 14 | M12 | 58 | 6 |
| 18 | M16 | 68 | 6 |
| 23 | M20 | 80 | 8 |
| 25 | M22 | 92 | 8 |
| 27 | M24 | 105 | 8 |
*All information is strictly informative
DIN 2093 Washers Dimensions, DIN 2093 Belleville Washer Weight Chart & Material Specification & Tolerances / DIN 2093 Washer Manufacturer & Suppliers Mumbai, India
DIN 2093 Specifications
All measurements in millimeters (mm)
| DE | Di | t |
|---|---|---|
| 8 | 3.2 | 0.2, 0.3, 0.4 |
| 8 | 4.2 | 0.2, 0.3, 0.4 |
| 10 | 3.2 | 0.3, 0.4, 0.5 |
| 10 | 4.2 | 0.4, 0.5 |
| 10 | 5.2 | 0.25, 0.4, 0.5 |
| 12 | 4.2 | 0.4, 0.5, 0.6 |
| 12 | 5.2 | 0.5, 0.6 |
| 12 | 6.2 | 0.5, 0.6 |
| 12.5 | 5.2 | 0.5 |
| 12.5 | 6.2 | 0.35, 0.5, 0.7 |
| 14 | 7.2 | 0.35, 0.5, 0.8 |
| 15 | 5.2 | 0.4, 0.5, 0.6, 0.7 |
| 15 | 6.2 | 0.5, 0.6, 0.7 |
| 15 | 8.2 | 0.7, 0.8 |
| 16 | 8.2 | 0.4, 0.6, 0.7, 0.8, 0.9 |
| 18 | 6.2 | 0.4, 0.5, 0.6, 0.7, 0.8 |
| 18 | 8.2 | 0.5, 0.7, 0.8, 1 |
| 18 | 9.2 | 0.45, 0.7, 1 |
| 20 | 8.2 | 0.6, 0.7, 0.8, 0.9, 1 |
| 20 | 10.2 | 0.5, 0.8, 0.9, 1, 1.1, 1.25, 1.5 |
| 22.5 | 11.2 | 0.6, 0.8, 1.25 |
| 23 | 8.2 | 0.7, 0.8, 0.9, 1 |
| 23 | 10.2 | 0.9, 1, 1.25 |
| 23 | 12.2 | 1, 1.25, 1.5 |
| 25 | 10.2 | 1 |
| 25 | 12.2 | 0.7, 0.9, 1, 1.25, 1.5 |
| 28 | 10.2 | 0.8, 1, 1.25, 1.5 |
| 28 | 12.2 | 1, 1.25, 1.5 |
| 28 | 14.2 | 0.8, 1, 1.25, 1.5 |
| 31.5 | 12.2 | 1, 1.25, 1.5 |
| 31.5 | 16.3 | 0.8, 1.25, 1.5, 1.75, 2 |
| 34 | 12.3 | 1, 1.25, 1.5 |
| 34 | 14.3 | 1.25, 1.5 |
| 34 | 16.3 | 1.5, 2 |
| 35.5 | 18.3 | 0.9, 1.25, 2 |
| 40 | 14.3 | 1.25, 1.5, 2 |
| 40 | 16.3 | 1.5, 2 |
| 40 | 18.3 | 2 |
| 40 | 20.4 | 1, 1.5, 2, 2.25, 2.5 |
| 45 | 22.4 | 1.25, 1.75, 2.5 |
| 50 | 18.4 | 1.25, 1.5, 2, 2.5, 3 |
| 50 | 20.4 | 2, 2.5 |
| 50 | 22.4 | 2, 2.5 |
| 50 | 25.4 | 1.25, 1.5, 2, 2.5, 3 |
| 56 | 28.5 | 1.5, 2, 3 |
| 60 | 20.5 | 2, 2.5, 3 |
| 60 | 25.5 | 2.5, 3 |
| 60 | 30.5 | 2.5, 3, 3.5 |
| 63 | 31 | 1.8, 2.5, 3, 3.5 |
| 70 | 25.5 | 2 |
| 70 | 30.5 | 2.5, 3 |
| 70 | 35.5 | 3, 4 |
| 70 | 40.5 | 4, 5 |
| 71 | 36 | 2, 2.5, 4 |
| 80 | 31 | 2.5, 3, 4 |
| 80 | 36 | 3, 4 |
| 80 | 41 | 2.25, 3, 4, 5 |
| 90 | 46 | 2.5, 3.5, 5 |
| 100 | 41 | 4, 5 |
| 100 | 51 | 2.7, 3.5, 4, 5, 6 |
| 112 | 57 | 3, 4, 6 |
| 125 | 41 | 4 |
| 125 | 51 | 4, 5, 6 |
| 125 | 61 | 5, 6, 8 |
| 125 | 64 | 3.5, 5, 8 |
| 125 | 71 | 6, 8, 10 |
| 140 | 72 | 3.8, 5, 8 |
| 150 | 61 | 5, 6 |
| 150 | 71 | 6, 8 |
| 150 | 81 | 8, 10 |
*All information is strictly informative
DIN 6319 C Washers Dimensions, DIN 6319 C Spherical Washer Weight Chart & Material Specification & Tolerances / DIN 6319 C Conical Washer Manufacturer & Suppliers Mumbai, India
DIN 6319C Specifications
DIN6319C Spherical Washers for Conical Seats - (Spherical washers Steel / Stainless Steel DIN 6319) Product Drawing - d1=ID, d3=OD, h2=total height, h1= collar height
All measurements in millimeters (mm)
| For Screw | d1 | d3 | h1 | h2 | r1 |
|---|---|---|---|---|---|
| M6 | 6.4 | 12 | 0.7 | 2.3 | 9 |
| M8 | 8.4 | 17 | 0.6 | 3.2 | 12 |
| M10 | 10.5 | 21 | 0.8 | 4 | 15 |
| M12 | 13 | 24 | 1.1 | 4.6 | 17 |
| M14 | — | — | — | — | — |
| M16 | 17 | 30 | 1.3 | 5.3 | 22 |
| M20 | 21 | 36 | — | 6.3 | 27 |
| M24 | 25 | 44 | — | 8.2 | 32 |
| M30 | 31 | 56 | — | 11.2 | 41 |
*All information is strictly informative
DIN 6319 - Spherical washers
Equivalent norms: PN 82026
| Legend: d1 - Inner diameter r1 - diameter of the sphere h2 - Washer width d2 - Inner diameter h3 - Washer width d4 - Outer diameter d3 - Outer diameter h1 - height f1 - internal shrinkage d5 - average shrinkage | Makings: Steel: hardened steel Stainless: A2 Plastic: - Non Ferrous: - Thread: - |
Table according to DIN 6319: dimensions in mm
| d1 | d2 | d3 | d4 | d5 | f1 | h1 | h2 | h3 | r1 | Weight kg/100pcs | Thread size | Maximum bolting force | ||||
| H13 | H13 | Type D | Type G | Type D | Type G | C | D | G | in kN | |||||||
| 6,4 | 7,1 | 12 | 12 | 17 | 11 | 0,3 | 0,7 | 2,3 | 2,8 | 4 | 9 | 0,09 | 0,14 | 0,56 | M6 | 9 |
| 8,4 | 9,6 | 17 | 17 | 24 | 14,5 | 0,5 | 0,6 | 3,2 | 3,5 | 5 | 12 | 0,25 | 0,38 | 1,3 | M8 | 17 |
| 10,5 | 12 | 21 | 21 | 30 | 18,5 | 0,5 | 0,8 | 4 | 4,2 | 5 | 15 | 0,47 | 0,65 | 1,86 | M10 | 26 |
| 13 | 14,2 | 24 | 24 | 36 | 20 | 0,5 | 1,1 | 4,6 | 5 | 6 | 17 | 0,71 | 1,06 | 3,7 | M12 | 38 |
| 15 | 16,5 | 28 | 28 | 40 | 24,8 | 0,5 | 1,2 | 5 | 5,6 | 6 | 22 | 1 | 1,8 | 4,8 | M14 | 53 |
| 17 | 19 | 30 | 30 | 44 | 26 | 0,5 | 1,3 | 5,3 | 6,2 | 7 | 22 | 1,23 | 1,87 | 7 | M16 | 73 |
| 21 | 23,2 | 36 | 36 | 50 | 31 | 0,5 | 2 | 6,3 | 7,5 | 8 | 27 | 2,08 | 3,2 | 9,4 | M20 | 117 |
| 25 | 28 | 44 | 44 | 60 | 37 | 0,8 | 2,4 | 8,2 | 9,5 | 10 | 32 | 4,2 | 6,3 | 16,9 | M24 | 168 |
| 31 | 35 | 56 | 56 | 68 | 49 | 0,8 | 3,6 | 11,2 | 12 | 12 | 41 | 8,7 | 13,3 | 23,8 | M30 | 269 |
| 37 | 42 | 68 | 68 | - | 60 | 1 | 4,6 | 14 | 15 | - | 50 | 18,4 | 23,6 | - | M36 | 394 |
| 43 | 49 | 78 | 78 | - | 70 | 1 | 6,5 | 17 | 18 | - | 58 | 29,7 | 36,5 | - | M42 | 542 |
| 50 | 56 | 92 | 92 | - | 82 | 1 | 8 | 21 | 22 | - | 67 | 52,5 | 64,1 | - | M48 | 714 |
DIN 6319D Washers Dimensions, DIN 6319D Spherical Washers Weight Chart & Material Specification & Tolerances / DIN 6319D Washer Manufacturer & Suppliers Mumbai, India
DIN 6319D Specifications
DIN6319D Conical Seats - Product Drawing - d2=ID, d5=plate dia., h3=Total height
All measurements in millimeters (mm)
| For Screw | d2 | d4 | d5 | h3 |
|---|---|---|---|---|
| M6 | 7.1 | 12 | 11 | 2.8 |
| M8 | 9.6 | 17 | 11.5 | 3.5 |
| M10 | 12 | 21 | 18.5 | 4.2 |
| M12 | 14.2 | 24 | 20 | 5 |
| M14 | 16.5 | 28 | 24.8 | 5.6 |
| M16 | 19 | 30 | 26 | 6.2 |
| M20 | 23.2 | 36 | 31 | 7.5 |
| M24 | 28 | 44 | 37 | 9.5 |
| M30 | 35 | 56 | 49 | 12 |
*All information is strictly informative
DIN 6796 Washers Dimensions, DIN 6796 Washer Weight Chart & Material Specification & Tolerances / DIN 6796 Washer Manufacturer & Suppliers Mumbai, India
Din 6796 Disc Washer / Belleville Washers / 6796 Conical Spring Washer / 6796 Spring Washer / Strain Washer
DIN 6796 Specifications
All measurements in millimeters (mm)
| d | used for | s | h max | d1 |
|---|---|---|---|---|
| 2.7 | M2.5 | 0.5 | – | 6 |
| 3.2 | M3 | 0.6 | 0.85 | 7 |
| 3.7 | M3.5 | 0.8 | 1.06 | 8 |
| 4.3 | M4 | 1 | 1.3 | 9 |
| 5.3 | M5 | 1.2 | 1.55 | 11 |
| 6.4 | M6 | 1.5 | 2 | 14 |
| 7.4 | M7 | 1.75 | 2.3 | 17 |
| 8.4 | M8 | 2 | 2.6 | 18 |
| 10.5 | M10 | 2.5 | 3.2 | 23 |
| 13 | M12 | 3 | 3.95 | 29 |
| 15 | M14 | 3.5 | 4.65 | 35 |
| 17 | M16 | 4 | 5.25 | 39 |
| 19 | M18 | 4.5 | 5.8 | 42 |
| 21 | M20 | 5 | 6.4 | 45 |
*All information is strictly informative
Weights for Din 6796 Washer, Din 6796 Washer Dimensions & Material Specification & Tolerances / Din 6796 Washer Manufacturer & Suppliers Mumbai, India
Weights for DIN 6796
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
Din 6796 Disc Washer / Belleville Washers / Conical Spring Washer / Spring Washer / Strain Washer Din 6796
| Size | Weight |
|---|---|
| M2 | 0.05 |
| M2.5 | 0.09 |
| M3 | 0.14 |
| M3.5 | 0.25 |
| M4 | 0.38 |
| M5 | 0.69 |
| M6 | 1.43 |
| M7 | 2.53 |
| M8 | 3.13 |
| M10 | 6.45 |
| M12 | 12.4 |
| M14 | 21.6 |
| M16 | 30.4 |
| M18 | 38.9 |
| M20 | 48.8 |
| M22 | 63.5 |
| M24 | 92.9 |
| M27 | 113 |
| M30 | 170 |
*All information is strictly informative
DIN 6797 Washers Dimensions, Lock Washer,Toothed Washer Weight Chart & Washer Material Specification & Tolerances / DIN 6797 Washer Manufacturer & Suppliers Mumbai, India
DIN 6797 Specifications
Form J (Internal)
All measurements in millimeters (mm)
| d1 | used for | d2 | s |
|---|---|---|---|
| 2.8 | M2.5 | 5.5 | 0.4 |
| 3.2 | M3 | 6 | 0.4 |
| 3.7 | M3.5 | 7 | 0.5 |
| 4.3 | M4 | 8 | 0.5 |
| 5.1 | M5 | 9 | 0.5 |
| 5.3 | M5 | 10 | 0.6 |
| 6.4 | M6 | 11 | 0.7 |
| 8.2 | M8 | 14 | 0.8 |
| 8.4 | M8 | 15 | 0.8 |
| 10.5 | M10 | 18 | 0.9 |
| 13 | M12 | 20.5 | 1 |
| 15 | M14 | 24 | 1 |
| 17 | M16 | 26 | 1.2 |
| 21 | M20 | 33 | 1.4 |
| 25 | M24 | 38 | 1.5 |
*All information is strictly informative
Weights for Din 6797 Washer, Toothed Washer Dimensions & Lock Washer Material Specification & Tolerances / Din 6797 Washer Manufacturer & Suppliers Mumbai, India
Weights for DIN 6797
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
| Size | Weight | |
|---|---|---|
| Type A | Type J | |
| M1.6 | 0.010 | |
| M2 | 0.025 | 0.040 |
| M2.5 | 0.040 | 0.045 |
| M3 | 0.045 | 0.045 |
| M3.5 | 0.075 | 0.085 |
| M4 | 0.095 | 0.10 |
| M5 | 0.18 | 0.20 |
| M6 | 0.22 | 0.25 |
| M7 | 0.30 | 0.35 |
| M8 | 0.45 | 0.55 |
| M10 | 0.80 | 0.9 |
| M12 | 1.0 | 1.2 |
| M14 | 1.6 | 1.9 |
| M16 | 2.0 | 2.4 |
| M18 | 3.5 | 3.7 |
| M20 | 3.8 | 4.1 |
| M22 | 5.0 | 6.0 |
| M24 | 6.0 | 6.5 |
| M27 | 8.0 | 8.5 |
| M30 | 9.0 | 9.5 |
*All information is strictly informative
DIN 6798 Washers Dimensions, Din 6798 Serrated Washer Weight Chart & Toothed Washer Specification & Tolerances / DIN 6798 Washer Manufacturer & Suppliers Mumbai, India
Din 6798 V Washers / Serrated Washer / Serrated Lock Washer / A Washer / Lock Washer Din 6798 / Toothed Washer
DIN 6798 Specifications
Form J (Internal)
All measurements in millimeters (mm)
| d1 | used for | d2 | s |
|---|---|---|---|
| 2.7 | M2.5 | 5.5 | 0.4 |
| 3.2 | M3 | 6 | 0.4 |
| 3.7 | M3.5 | 7 | 0.5 |
| 4.3 | M4 | 8 | 0.5 |
| 5.3 | M5 | 10 | 0.6 |
| 6.4 | M6 | 11 | 0.7 |
| 8.4 | M8 | 15 | 0.8 |
| 10.5 | M10 | 18 | 0.9 |
| 13 | M12 | 20.5 | 1 |
| 15 | M14 | 24 | 1 |
| 17 | M16 | 26 | 1.2 |
| 21 | M20 | 33 | 1.4 |
| 25 | M24 | 38 | 1.5 |
*All information is strictly informative
Weights for DIN 6798 Washer, DIN 6798 Washer Dimensions & DIN 6798 Serrated Lock Washer Material Specification & Tolerances / DIN 6798 Washer Manufacturer & Suppliers Mumbai, India
Weights for DIN 6798
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
Din 6798 V Washers / Serrated Washer / Serrated Lock Washer / A Washer / Lock Washer / Toothed Washer
| Size | Weight | |
|---|---|---|
| Type A/J | Type V | |
| M1.6 | 0.020 | |
| M2 | 0.030 | 0.025 |
| M2.5 | 0.045 | 0.030 |
| M3.0 | 0.06 | 0.040 |
| M3.5 | 0.11 | 0.075 |
| M4 | 0.14 | 0.1 |
| M5 | 0.28 | 0.2 |
| M6 | 0.36 | 0.3 |
| M7 | 0.50 | |
| M8 | 0.80 | 0.5 |
| M10 | 1.25 | 1.0 |
| M12 | 1.6 | 1.5 |
| M14 | 2.3 | 1.9 |
| M16 | 2.9 | 2.3 |
| M18 | 5.0 | |
| M20 | 6.0 | |
| M22 | 7.5 | |
| M24 | 8.0 | |
| M27 | 12 | |
| M30 | 14 | |
*All information is strictly informative
DIN 6916 Flat Washers Dimensions, Structural Washer Weight Chart & DIN 6916 Washer Material Specification & Tolerances / DIN 6916 Washer Manufacturer & Suppliers Mumbai, India
DIN 6916 Specifications
DIN6916HV-C45 Structural Washer - Product Drawing - d1=ID, d2=OD, s=thickness
All measurements in millimeters (mm)
| d1 | used for | d2 | s |
|---|---|---|---|
| 13 | M12 | 24 | 3 |
| 17 | M16 | 30 | 4 |
| 21 | M20 | 37 | 4 |
| 23 | M22 | 39 | 4 |
| 25 | M24 | 44 | 4 |
| 28 | M27 | 50 | 5 |
| 31 | M30 | 56 | 5 |
| 37 | M36 | 66 | 6 |
*All information is strictly informative
Weights for DIN 6916 Washer, Flat Washer Dimensions & Structural Washer Material Specification & Tolerances/ DIN 6916 Washer Manufacturer & Suppliers Mumbai, India
Weights for DIN 6916
DIN6916 Structural Washer drawing
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
| Size | Weight |
|---|---|
| M12 | 7.03 |
| M16 | 14.6 |
| M20 | 19.6 |
| M22 | 24.3 |
| M24 | 30.6 |
| M27 | 50.2 |
| M30 | 63.2 |
| M36 | 115 |
*All information is strictly informative
DIN 7349 Washers Dimensions, Weight Chart & Thick Flat Washer Material Specification & Tolerances - Flat Washers With Large Ext. Diameter Specifications.
DIN 7349 Specifications
DIN7349 Thick Flat Washer - product drawing - d1=ID, d2=OD, s=thickness
All measurements in millimeters (mm)
| d1 | for spring pins DIN 1481 | for screws | s | d2 |
|---|---|---|---|---|
| 3.2 | 6 | M3 | 1 | 9 |
| 4.3 | 8 | M4 | 1.6 | 12 |
| 5.3 | 10 | M5 | 2 | 15 |
| 6.4 | 12 | M6 | 3 | 17 |
| 8.4 | 16 | M8 | 4 | 21 |
| 10.5 | 18 | M10 | 4 | 25 |
| 13 | 21 | M12 | 6 | 30 |
| 15 | 25 | M14 | 6 | 36 |
| 17 | 28 | M16 | 6 | 40 |
| 21 | 35 | M20 | 8 | 44 |
| 23 | 38 | M22 | 8 | 50 |
| 25 | 40 | M24 | 10 | 50 |
| 31 | 50 | M30 | 10 | 68 |
*All information is strictly informative
DIN 7349 Washers Dimensions, Flat Washer Weight Chart & Washer Material Specification & Tolerances / Washer Manufacturer & Suppliers Mumbai, India
Weights for DIN 7349
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
Din 7349 Washer Material / Din 7349 Washer Dimensions / Din 7349 Flat Washer / M6 Washer Din 7349 / Din 7349 Washers
| Size | Weight |
|---|---|
| M3 | 0.436 |
| M4 | 1.24 |
| M5 | 2.43 |
| M6 | 4.59 |
| M8 | 9.15 |
| M10 | 12.7 |
| M12 | 27.1 |
| M14 | 39.6 |
| M16 | 48.5 |
| M18 | 77.4 |
| M20 | 73.4 |
| M22 | 97.1 |
| M24 | 116 |
| M27 | 174 |
| M30 | 226 |
*All information is strictly informative
DIN 7980 Washers Dimensions, DIN 7980 Lock Washer Weight Chart & DIN 7980 High Collar Lock Washer Material Specification & Tolerances / Din 7980 Spring Washer Manufacturer & Suppliers Mumbai, India
DIN 7980 Specifications
All measurements in millimeters (mm)
| d1 | used for | s | d2 |
|---|---|---|---|
| 3.1 | M3 | 1 | 5.6 |
| 4.1 | M4 | 1.2 | 7 |
| 5.1 | M5 | 1.6 | 8.8 |
| 6.1 | M6 | 1.6 | 9.9 |
| 8.1 | M8 | 2 | 12.7 |
| 10.2 | M10 | 2.5 | 16 |
| 12.2 | M12 | 2.5 | 18 |
| 14.2 | M14 | 3 | 21.1 |
| 16.2 | M16 | 3.5 | 24.4 |
| 18.2 | M18 | 3.5 | 26.4 |
| 20.2 | M20 | 4.5 | 30.6 |
| 22.5 | M22 | 4.5 | 32.9 |
| 24.5 | M24 | 5 | 35.9 |
| 27.5 | M27 | 5 | 38.9 |
| 30.5 | M30 | 6 | 44.1 |
| 33.5 | M33 | 6 | 47.1 |
| 36.5 | M36 | 7 | 52.2 |
*All information is strictly informative
Weights for DIN 7980 Washer, DIN 7980 High Collar Lock Washer Dimensions & Washer Material Specification & Tolerances/ 7980 Washer Manufacturer & Suppliers Mumbai, India
Weights for DIN 7980
DIN7980 High Collar Lock Washer
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
| Size | Weight |
|---|---|
| M3 | 0.105 |
| M3.5 | 0.114 |
| M4 | 0.195 |
| M5 | 0.370 |
| M6 | 0.425 |
| M8 | 1.05 |
| M10 | 1.96 |
| M12 | 2.28 |
| M14 | 3.80 |
| M16 | 5.94 |
| M18 | 6.60 |
| M20 | 12.3 |
| M22 | 13.6 |
| M24 | 18.1 |
| M27 | 20.6 |
| M30 | 32 |
| M33 | 35 |
| M36 | 52.5 |
| M42 | 80 |
| M48 | 90 |
*All information is strictly informative
DIN 7989 Washers Dimensions, DIN 7989 Washer Weight Chart & 7989 Flat Washer, 7989 - Thick Flat Washer Material Specification & Tolerances / 7989 Washer Manufacturer & Suppliers Mumbai, India
DIN 7989 Specifications
DIN 7989 Extra Thick Flat Washer - product drawing - d=ID, d1=OD, s=thickness
All measurements in millimeters (mm)
| d1 | used for | d2 | s |
|---|---|---|---|
| 11 | M10 | 21 | 8 |
| 14 | M12 | 24 | 8 |
| 18 | M16 | 30 | 8 |
| 22 | M20 | 37 | 8 |
| 26 | M24 | 44 | 8 |
| 30 | M27 | 50 | 8 |
| 33 | M30 | 56 | 8 |
*All information is strictly informative
Weights for DIN 7989 Washer, 7989 Flat Washer Dimensions & 7989 Washer Material Specification & Tolerances/ 7989 Washer Manufacturer & Suppliers Mumbai, India
Weights for DIN 7989
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
| Size | Weight |
|---|---|
| 10 | 15.7 |
| 12 | 18.8 |
| 16 | 28.3 |
| 20 | 43.6 |
| 22 | 46.2 |
| 24 | 61.5 |
| 27 | 79 |
| 30 | 101 |
| 33 | 114 |
| 36 | 140 |
*All information is strictly informative
Manufacturer & Suppliers of DIN 9021 Washer in India - Flat Washers Dimensions, 9021 Plain Washer Weight Chart & 9021 Material Specification & Tolerances / Din 9021 A8 & Din 9021 A4 Fender Washer, Din 9021 Flat Washers & Plain Washer Suppliers
DIN 9021 Specifications
DIN9021 Fender Washer - Dimensional Drawing - d1=ID,d2=OD,s=thickness
All measurements in millimeters (mm)
| d1 | used for | d2 max | s |
|---|---|---|---|
| 3.2 | M3 | 9 | 0.8 |
| 4.3 | M4 | 12 | 1 |
| 5.3 | M5 | 15 | 1.2 |
| 6.4 | M6 | 18 | 1.6 |
| 8.4 | M8 | 24 | 2 |
| 10.5 | M10 | 30 | 2.5 |
| 13 | M12 | 37 | 3 |
| 15 | M14 | 44 | 3 |
| 17 | M16 | 50 | 3 |
| 20 | M18 | 56 | 4 |
| 22 | M20 | 60 | 4 |
*All information is strictly informative
Fender Washers - A2 / A4 Stainless
Large O.D.
W034 – 9021B-A2 / W035 – 9021B-A4
DIN 9021B / ISO 7093
| For Screw | d1 min. | d2 max. | s | A2 | A4 | ||
|---|---|---|---|---|---|---|---|
| Pkg. | Order # | Pkg. | Order # | ||||
| M3 | 3.2 | 9 | 0.8 | 100 | W034-003-0000 | 100 | W035-004-0000 |
| M4 | 4.3 | 12 | 1 | 100 | W034-004-0000 | 100 | W035-005-0000 |
| M5 | 5.3 | 15 | 1.2 | 100 | W034-005-0000 | 100 | W035-006-0000 |
| M6 | 6.4 | 18 | 1.6 | 100 | W034-006-0000 | 100 | W035-008-0000 |
| M8 | 8.4 | 24 | 2 | 100 | W034-008-0000 | 100 | W035-010-0000 |
| M10 | 10.5 | 30 | 2.5 | 100 | W034-010-0000 | 100 | W035-012-0000 |
| M12 | 13 | 37 | 3 | 100 | W034-012-0000 | 100 | W035-016-0000 |
| M16 | 17 | 50 | 3 | ||||
Weights for DIN 9021 Washer, 9021 Flat Washer Dimensions & DIN 9021 Washer Material Specification & Tolerances / DIN 9021 Washer Manufacturer & Suppliers Mumbai, India
Weights for DIN 9021
DIN9021 Fender Washer Large OD
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
| Size | Weight |
|---|---|
| M2.5 | 0.280 |
| M3 | 0.349 |
| M3.5 | 0.529 |
| M4 | 0.774 |
| M5 | 1.46 |
| M6 | 2.79 |
| M7 | 5.29 |
| M8 | 6.23 |
| M10 | 12.2 |
| M12 | 22.2 |
| M14 | 31.6 |
| M16 | 40.9 |
| M18 | 67.4 |
| M20 | 76.8 |
| M24 | 139 |
| M30 | 273 |
| M36 | 522 |
*All information is strictly informative
Din 9021 Washer Pdf / DIN 9021 Flat Washer Dimensions / 9021 Washer Tolerances / Din 9021 Washer Specification / Din 9021 Washer Material / Din 9021 Washer Weight / Din 9021 Washer M6 / Din 9021 Washer M8 / 9021 Flat Washer / M4 Washer Din 9021 / Washer M12 Din 9021 / M3 Washer 9021 / 9021 Washer Spec
Specifications for Ribbed Lock Washer
Ribbed lock washers solve the problem of securing screw connections. The valuable properties of the steel spring washer are supplemented by a patented serrated profile. This S and VS series provide maximum security against slackening through vibration. The smoothly rounded serrations uniformly press against the contact surfaces of the bolted connections, gripping them securely without damage. As the joint relaxes the deflection of the spring (H – S) maintains pressure on the nut and the inherent friction on the serrations gives additional protection against loosening.S – Series (Standard duty), VS – Series (Medium Duty)Standard Finish: Spring Steel, hardened, black finish. Also available: Stainless Steel, Phosphor Bronze, Zinc and Cadmium plating
| FMP Part# | Bolt Size Inch | OD Inch | ID | t | H | OD | ID | t | H | Weight lb/M | Package Qty |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W069-1.6-0000 | 0.126 | 0.067 | 0.014 | 0.024 | 3.2 | 1.7 | 0.35 | 0.6 | 0.04 | 2000 | |
| W069-002-0000 | 0.157 | 0.087 | 0.014 | 0.024 | 4.0 | 2.2 | 0.35 | 0.6 | 0.05 | 2000 | |
| W069-2.5-0000 | 0.197 | 0.106 | 0.018 | 0.035 | 4.8 | 2.7 | 0.45 | 0.9 | 0.10 | 2000 | |
| W069-003-0000 | 1/8 #5 | 0.217 | 0.126 | 0.018 | 0.035 | 5.5 | 3.2 | 0.45 | 0.9 | 0.12 | 2000 |
| W069-3.5-0000 | #6 | 0.236 | 0.146 | 0.018 | 0.035 | 6.0 | 3.7 | 0.45 | 0.9 | 0.14 | 2000 |
| W069-004-0000 | 5/32 #8 | 0.276 | 0.169 | 0.020 | 0.039 | 7.0 | 4.3 | 0.50 | 1.0 | 0.21 | 1000 |
| W069-005-0000 | 3/16 #10 | 0.354 | 0.209 | 0.024 | 0.043 | 9.0 | 5.3 | 0.60 | 1.1 | 0.35 | 1000 |
| W069-006-0000 | 0.394 | 0.252 | 0.028 | 0.047 | 10.0 | 6.4 | 0.70 | 1.2 | 0.48 | 1000 | |
| W069-007-0000 | 0.472 | 0.291 | 0.028 | 0.051 | 12.0 | 7.4 | 0.70 | 1.3 | 0.73 | 1000 | |
| W069-008-0000 | 5/16 | 0.512 | 0.331 | 0.031 | 0.055 | 13.0 | 8.4 | 0.80 | 1.4 | 0.95 | 1000 |
| W069-010-0000 | 3/8 | 0.630 | 0.413 | 0.039 | 0.063 | 16.0 | 10.5 | 1.00 | 1.6 | 1.80 | 1000 |
| W069-012-0000 | 0.709 | 0.512 | 0.043 | 0.067 | 18.0 | 13.0 | 1.10 | 1.7 | 2.10 | 500 | |
| W069-014-0000 | 0.866 | 0.591 | 0.047 | 0.079 | 22.0 | 15.0 | 1.20 | 2.0 | 3.90 | 500 | |
| W069-016-0000 | 5/8 | 0.945 | 0.669 | 0.051 | 0.083 | 24.0 | 17.0 | 1.30 | 2.1 | 4.70 | 500 |
| W069-018-0000 | 1.063 | 0.748 | 0.059 | 0.091 | 27.0 | 19.0 | 1.50 | 2.3 | 7.00 | 250 | |
| W069-020-0000 | 1.181 | 0.827 | 0.059 | 0.094 | 30.0 | 21.0 | 1.50 | 2.4 | 8.70 | 250 | |
| W069-022-0000 | 7/8 | 1.299 | 0.906 | 0.059 | 0.098 | 33.0 | 23.0 | 1.50 | 2.5 | 10.60 | 100 |
| W069-024-0000 | 1.410 | 1.008 | 0.071 | 0.106 | 36.0 | 25.6 | 1.80 | 2.7 | 14.00 | 100 | |
| W069-027-0000 | 1.535 | 1.126 | 0.079 | 0.114 | 39.0 | 28.6 | 2.00 | 2.9 | 17.00 | 100 | |
| W069-030-0000 | 1 1/8 | 1.772 | 1.244 | 0.079 | 0.126 | 45.0 | 31.6 | 2.00 | 3.2 | 25.00 | 100 |
| W069-036-0000 | 1 3/8 | 2.126 | 1.496 | 0.098 | 0.157 | 54.0 | 38.0 | 2.50 | 4.0 | 48.00 | 50 |
*All information is strictly informative
DIN 470 Sealing Washers Dimensions, 470 Sealing Washers Weight Chart & 470 Sealing Washers Material Specification & Tolerances / 470 Sealing Washers Manufacturer & Suppliers Mumbai, India
DIN 470 Specifications
DIN470 Sealing washer - product drawing - d=dia.,h=height, s=thickness
All measurements in millimeters (mm)
| d | h | r | s |
|---|---|---|---|
| 10 | 2.67 | 12 | 1.6 |
| 12 | 2.77 | 16 | 1.6 |
| 14 | 2.94 | 19 | 1.6 |
| 16 | 3.11 | 22 | 1.6 |
| 18 | 3.28 | 25 | 1.6 |
| 20 | 3.45 | 28 | 1.6 |
| 25 | 4.38 | 34 | 2 |
| 28 | 4.53 | 40 | 2 |
| 30 | 4.77 | 42 | 2 |
| 32 | 4.95 | 45 | 2 |
| 34 | 5.11 | 48 | 2 |
| 36 | 5.36 | 50 | 2 |
| 38 | 5.6 | 52 | 2 |
| 40 | 5.7 | 56 | 2 |
| 42 | 5.8 | 60 | 2 |
| 45 | 6.15 | 63 | 2 |
| 48 | 6.38 | 68 | 2 |
| 50 | 6.62 | 70 | 2 |
| 52 | 6.66 | 75 | 2 |
| 56 | 7.06 | 80 | 2 |
| 60 | 7.47 | 85 | 2 |
*All information is strictly informative
DIN 988 Washers Dimensions, 988 Washers Weight Chart & DIN 988 Washers Material Specification & Tolerances / Specifications / DIN 988 Washers Manufacturer & Suppliers Mumbai, India
DIN 988 Specifications
All measurements in millimeters (mm)
| d1 | d2 | s |
|---|---|---|
| M3 | 6 | 0.1, 0.2, 0.3, 0.5 |
| M4 | 8 | 0.1, 0.2, 0.3, 0.5 |
| M5 | 10 | 0.1, 0.2, 0.3, 0.5 |
| M6 | 12 | 0.1, 0.2, 0.3, 0.5, 1 |
| M8 | 14 | 0.1, 0.2, 0.3, 0.5, 1 |
| M10 | 16 | 0.1, 0.2, 0.3, 0.5, 1 |
| M11 | 17 | 0.1, 0.2, 0.3, 0.5 |
| M12 | 18 | 0.1, 0.2, 0.3, 0.5, 1 |
| M13 | 19 | 0.1, 0.2, 0.3, 0.5, 1 |
| M15 | 21 | 0.1, 0.2, 0.3, 0.5, 1 |
| M16 | 22 | 0.1, 0.2, 0.3, 0.5, 1 |
| M17 | 24 | 0.1, 0.2, 0.3, 0.5, 1 |
| M18 | 25 | 0.1, 0.2, 0.3, 0.5, 1 |
| M20 | 28 | 0.1, 0.2, 0.3, 0.5, 1, 1.5 |
| M22 | 30 | 0.1, 0.2, 0.3, 0.5, 1, 1.5 |
| M25 | 35 | 0.1, 0.2, 0.3, 0.5, 1, 1.5 |
| M30 | 42 | 0.1, 0.2, 0.3, 0.5, 1, 1.5, 2 |
| M35 | 45 | 0.1, 0.2, 0.3, 0.5, 1, 1.5 |
| M40 | 50 | 0.1, 0.2, 0.3, 0.5, 1, 1.5 |
*All information is strictly informative
Din 1440 Washers Dimensions, Din 1440 Flat Washer, Din 1440 Washers Dimensions, Weight Chart & Material Specification & Tolerances / Din 1440 Washers Manufacturer & Suppliers Mumbai, India
Weights for DIN 1440
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
| Size | Weight |
|---|---|
| M3 | .13 |
| M4 | .23 |
| M5 | .36 |
| M6 | .98 |
| M7 | 1.33 |
| M8 | 2.22 |
| M9 | 3.69 |
| M10 | 4.56 |
| M11 | 9.25 |
| M12 | 8.99 |
| M13 | 8.36 |
| M14 | 10.8 |
| M16 | 9.68 |
| M18 | 13.8 |
| M20 | 15 |
| M22 | 16.2 |
| M23 | 18.5 |
| M25 | 23.6 |
| M26 | 28.5 |
| M28 | 29.7 |
| M30 | 34.2 |
| M32 | 44.8 |
| M33 | 43.3 |
| M35 | 52.8 |
| M36 | 49.5 |
| M40 | 63.7 |
| M45 | 76.8 |
| M50 | 101 |
*All information is strictly informative
DIN 6796 High Duty Safety Spring Washers Dimensions, Weight Chart & Material Specification & Tolerances / DIN 6796 High Duty Safety Spring Washers / DIN 6796 High Duty Safety Spring Washers
DIN 6796 High Duty Safety Spring Washers
High duty safety spring washers are designed for use as loose washers over screws and bolts. Manufactured to DIN 6796 they are designed to be used for medium or high strength screw or bolt assemblies.The high supporting load and spring return make the High Duty Safety Spring Washers series extremely effective where bolt tension may be subject to relaxation due to such factors as : smoothing out of wear parts, creep, relaxation, thermal expansion or contraction, or compression set of gaskets.The HDS series multiplies the elastic action of the screw. They are an effective replacement for the time honored, but obsolete and ineffective, lock washer / flat washer combinations.
Since the High Duty Safety Spring Washers series are disc springs they can be stacked in series and/or in parallel. Series stacking increases the available deflection of the spring stack. Parallel stacking increases the spring force.
The desired installation is as near flat as possible. When nearing flat, the tightening torque increases sharply, indicating the proper bolt tension without a torque wrench.
High Duty Safety Spring Washers washers, hardened (43-48 Rc), are made of Carbon Spring Steel, larger sizes having machined OD and ID. Other materials are available on request. High Duty Safety Spring washers are delivered with blank, slightly oiled surfaces. Phosphate and Zinc plating on request.
| Diameter | Bolt Size Inch | OD Inch | ID | t | H max * | H min # | F (lb) | OD mm | ID | t | H max * | H min # | F (N) + |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M2 | 0.197 | 0.087 | 0.016 | 0.024 | 0.020 | 140 | 5 | 2.2 | 0.40 | 0.60 | 0.50 | 630 | |
| M2.5 | 0.236 | 0.106 | 0.020 | 0.028 | 0.024 | 210 | 6 | 2.7 | 0.50 | 0.72 | 0.61 | 950 | |
| M3 | 1/8 .#5 | 0.276 | 0.126 | 0.024 | 0.033 | 0.028 | 300 | 7 | 3.2 | 0.60 | 0.85 | 0.72 | 1,320 |
| M3.5 | .#6 | 0.315 | 0.146 | 0.031 | 0.042 | 0.036 | 540 | 8 | 3.7 | 0.80 | 1.06 | 0.92 | 2,400 |
| M4 | 5/32.#8 | 0.354 | 0.169 | 0.039 | 0.051 | 0.044 | 850 | 9 | 4.3 | 1.00 | 1.30 | 1.12 | 3,800 |
| M5 | 3/16.#10 | 0.433 | 0.209 | 0.047 | 0.061 | 0.053 | 1,230 | 11 | 5.3 | 1.20 | 1.55 | 1.35 | 5,500 |
| M6 | 1/4 | 0.551 | 0.252 | 0.059 | 0.079 | 0.067 | 1,930 | 14 | 6.4 | 1.50 | 2.00 | 1.70 | 8,600 |
| M7 | 0.669 | 0.291 | 0.069 | 0.091 | 0.079 | 2,540 | 17 | 7.4 | 1.75 | 2.30 | 2.00 | 11,300 | |
| M8 | 5/16 | 0.709 | 0.331 | 0.079 | 0.102 | 0.088 | 3,360 | 18 | 8.4 | 2.00 | 2.60 | 2.24 | 14,900 |
| M10 | 3/8 | 0.906 | 0.413 | 0.098 | 0.126 | 0.110 | 4,970 | 23 | 10.5 | 2.50 | 3.20 | 2.80 | 22,100 |
| M12 | 1/2 | 1.142 | 0.512 | 0.118 | 0.156 | 0.135 | 7,670 | 29 | 13.0 | 3.00 | 3.95 | 3.43 | 34,100 |
| M14 | 9/16 | 1.378 | 0.591 | 0.138 | 0.183 | 0.159 | 10,340 | 35 | 15.0 | 3.50 | 4.65 | 4.04 | 46,000 |
| M16 | 5/8 | 1.535 | 0.669 | 0.157 | 0.207 | 0.180 | 13,400 | 39 | 17.0 | 4.00 | 5.25 | 4.58 | 59,700 |
| M18 | 1.653 | 0.748 | 0.177 | 0.228 | 0.200 | 16,700 | 42 | 19.0 | 4.50 | 5.80 | 5.08 | 74,400 | |
| M20 | 3/4 | 1.772 | 0.827 | 0.197 | 0.252 | 0.220 | 21,000 | 45 | 21.0 | 5.00 | 6.40 | 5.60 | 93,200 |
| M22 | 7/8 | 1.929 | 0.906 | 0.217 | 0.278 | 0.242 | 25,600 | 49 | 23.0 | 5.50 | 7.05 | 6.15 | 114,000 |
| M24 | 2.205 | 0.984 | 0.236 | 0.305 | 0.267 | 29,400 | 56 | 25.0 | 6.00 | 7.75 | 6.77 | 131,000 | |
| M27 | 1 | 2.362 | 1.102 | 0.256 | 0.329 | 0.287 | 34,600 | 60 | 28.0 | 6.50 | 8.35 | 7.30 | 154,000 |
| M30 | 1 1/8 | 2.756 | 1.220 | 0.276 | 0.362 | 0.315 | 38,700 | 70 | 31.0 | 7.00 | 9.20 | 8.00 | 172,000 |
| Part Number = W096-Diameter-0000 (Bare Steel) Number = W096-Diameter-0000-ZN (Zinc Plated) ( * )Overall height before set out ( # )Overall height after set out ( + )Approx. force to flatten. Twice calculated force at deflection Hmin – S |
*All information is strictly informative
If you don’t see what you’re looking for just call one of our team members at +91-22-6659 5285 Or Mail Us inquiry@raajsagarsteels.com. No inquiry is too large or too small, we specialize in locating hard to find items. If you do see what you are looking, we would love to assist you and give you a quote today!
24 Hrs. Online Whatsapp Number Contact Person: Mr. Milap Mehta - Cell: +91-9869 532 584