Steel Nuts & Bolts

Steel Nuts & Bolts Shipping Worldwide

Bolts & Nuts Manufacturers, Nut Bolts Stockist, Industrial Nuts Wholesalers Mumbai India

Nut Bolts | Dimensions | Specifications | Stainless Steel Fasteners Data | Diameters | Size | Fasteners Weight Calculator | Price in India

ALSO CHECK : Din Nut Specifications / Din Bolt Specifications / Din Screws Specifications / Din Washer Specifications / DOWNLOAD PDF & FASTENERS Specifications

 

Stainless Steel J Bolts | stainless steel j bolts, stainless steel j-bolt hinges

J-Bolt Grade: 304 Stainless Steel UNC Thread

The J-Bolt is UNC thread and available in sizes ranging from 3/16" to 1/2" to fit every project. This bolt is made from grade 304 stainless steel for corrosion resistance and durability, making it perfect for marine and industrial applications.

 

Specifications

ITEM	A	B	C	D	E	WT (lb)
S0358-0550	3/16"	1.25"	1.88"	0.31"	0.56"	0.03
S0358-0655	7/32"	1.25"	2.13"	0.34"	0.66"	0.04
S0358-0760	1/4"	1.25"	2.40"	0.38"	0.75"	0.05
S0358-0875	5/16"	1.71"	3.00"	0.50"	0.94"	0.08
S0358-10100	3/8"	2.25"	3.75"	0.50"	1.13"	0.12
S0358-10125	3/8"	2.25"	5.00"	0.50"	1.13"	0.16
S0358-10180	3/8"	2.25"	7.00"	0.50"	1.13"	0.22
S0358-13150	1/2"	3.00"	6.00"	0.63"	1.50"	0.26

Questions?

If you have questions about this product or any of our products, PLEASE VISIT OUR KNOWLEDGE BASE FOR FURTHER ASSISTANCE. If you don't find an answer, you can always submit a product question.

Stainless Steel Carriage Bolts | stainless steel carriage bolts, stainless steel carriage bolts 5/16

Carriage Bolts: Dimensions & Mechanical Properties

Carriage Bolts: Round Head Square Neck

- Length of a carriage bolt is measured from the underhead bearing surface to the extreme end of the bolt.

- ASME B18.5-1990 does not specify dimensions for the #8 or #12 diameters. Data listed for these sizes is independent of the ASME specification.

Carriage Bolts: Round Head Short Neck

  Request a Quote

 

- Length of a carriage bolt is measured from the underhead bearing surface to the extreme end of the bolt.

 Carriage Bolts: Round Head, Ribbed Neck

  Request a Quote

 

- Length of a carriage bolt is measured from the underhead bearing surface to the extreme end of the bolt.

-Tolerance on #10 through 1/2" sizes for nominal lengths of 7/8" and shorter shall be +.031 and -.000

 Carriage Bolts: Fin Neck

  Request a Quote

 

 Carriage Bolts: Flat Head, Square Neck

 

 

Stainless Steel Step Bolts | Stainless Steel Bolts Manufacturers in Mumbai India
Product Description

Raaj Sagar Steels is the step bolts supplier and manufacturer in India. We offers associated products of step bolts for application in the structural steel industry and automobile industry. The step bolts can be finishing with a broad range of coatings, such as zinc plated, black oxide, chrome. Customized needs and OEM solutions are welcome.

The step bolts are more durable and provide easy installation. The coating finish reduces friction for easy installation and protects from rust. If you have interested in our step bolts, please do not hesitate to contact us via the inquiry form.

Product Feature

Step bolts are literally used as steps on steel communication and electrical transmission towers. These bolts are generally provided with two. One nut is tightened against the thread run out. The unthreaded shank, or step length, typically ranges from 6" to 10".

Step Bolts are similar to Carriage Bolts in that they both have a square shoulder and a larger bearing surface. Step bolts, however have a larger and lower-profile round head creating a smooth surface. The larger head also makes it more difficult to be pulled through soft materials it is usually applied to. Plain finish, or bare metal, may or may not have a coating of light oil to resist corrosion.

Product Specifications

We are one of the leading manufacturers, suppliers and exporters of Step Bolts. Please contact us for all your needs of Step Bolts.

Available in diameters from #10 to 3/8" and lengths from 1" to 3".

SQUARE NECK CARRIAGE BOLT

Round head carriage bolts are also referred to as round head square neck carriage bolts. The dimensions listed above refer only to the standard neck bolts. If the dimensions for your requirement are similar but do not correspond directly with those above, you may need a round head short neck bolt. Dimensions and other information regarding this type of bolt are available from your sales representative. Step bolts look similar to carriage bolts. Dimensions vary slightly and are referenced below.

STEP BOLTS

Stainless Steel Flange Bolts | stainless steel flange bolts metric, stainless steel flange bolt torque, stainless steel flange bolt material
ASME/ANSI B16.5 provides

• weld neck
• slip-on
• socket weld
• threaded
• lap joint
• blind

flange dimensions for pipes ranging 1/2" to 24" - in classes ranging 150 to 2500.

• 1 inch = 25.4 mm

BOLT AND STUD DIMENSIONS - ASME B16.5 FLANGES

1/2"-13 Hex Tap Bolt 18-8 Stainless Steel : 1/2"-13 STAINLESS STEEL HEX TAP BOLTS

Diameter - Thread Pitch: 1/2" - 13

• 1/2"-13
• Hexagon head designed to be driven by a wrench or socket
• tap bolts differ from hex cap screws due to variations of threading at larger sizes
• 18-8 Stainless steel tap screws offer protection from weather and corrosive environments
• Rust resistant in fresh water environments
• For salt water environments use the 316 stainless steel version

Diameter x Thread Pitch x Length from Under Head

PRODUCT SPECIFICATIONS
Across Flats (Width) 3/4", Max 0.750 - Min 0.736
ANSI B18.2.1
Body Diameter 1/2" (Max 0.500 - Min 0.493)
Color Silver
Corrosion Resistant Yes
Diameter 1/2"
Drive Style External Hex
Elongation 30%
FT = Full Thread Yes
Hardness 100 Rockwell B
Head Height Max 0.323
Head Style Hex
Material Stainless Steel 18-8
Overall Head Height Max 0.323 - Min 0.302
Product Type Hex Tap Bolts
Reduction 40%
Standards Met ANSI B18.2.1
Tensile PSI 100,000 - 125,000
Thread Direction Right Hand
Thread Pitch (Count) 13
Thread Standard UNC
Thread Type Coarse
Threaded Length Fully Threaded
Tolerance (IFI)Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Wrench Size 3/4"
Yield PSI 55,000 - 75,000 See Less

7/8"-9 Hex Tap Bolt 18-8 Stainless Steel : 7/8"-9 STAINLESS STEEL HEX TAP BOLTS

Diameter - Thread Pitch: 7/8" - 9

---

• 7/8"-9
• Hexagon head designed to be driven by a wrench or socket
• tap bolts differ from hex cap screws due to variations of threading at larger sizes
• 18-8 Stainless steel tap screws offer protection from weather and corrosive environments
• Rust resistant in fresh water environments
• For salt water environments use the 316 stainless steel version

Diameter x Thread Pitch x Length from Under Head

PRODUCT SPECIFICATIONS
Across Flats (Width) 1-5/16", Max 1.312 - Min 1.285
ANSI B18.2.1
Body Diameter 7/8" (Max 0.8750 - Min 0.866)
Color Silver
Corrosion Resistant Yes
Diameter 7/8"
Drive Style External Hex
Elongation 30%
FT = Full Thread Yes
Hardness 100 Rockwell B
Head Height Max 0.563
Head Style Hex
Material Stainless Steel 18-8
Overall Head Height Max 0.563 - Min 0.531
Product Type Hex Tap Bolts
Reduction 40%
Standards Met ANSI B18.2.1
Tensile PSI 100,000 - 125,000
Thread Direction Right Hand
Thread Pitch (Count) 9
Thread Standard UNC
Thread Type Coarse
Threaded Length Fully Threaded
Tolerance (IFI)Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Wrench Size 1-5/16"
Yield PSI 55,000 - 75,000

5/16"-18 Hex Tap Bolt 18-8 Stainless Steel

5/16"-18 STAINLESS STEEL HEX TAP BOLTS

Diameter - Thread Pitch: 5/16" - 18

---

• 5/16"-18
• Hexagon head designed to be driven by a wrench or socket
• tap bolts differ from hex cap screws due to variations of threading at larger sizes
• 18-8 Stainless steel tap screws offer protection from weather and corrosive environments
• Rust resistant in fresh water environments
• For salt water environments use the 316 stainless steel version

Diameter x Thread Pitch x Length from Under Head

PRODUCT SPECIFICATIONS
Across Flats (Width) 1/2", Max 0.500 - Min 0.489
ANSI B18.2.1
Body Diameter 5/16" (Max 0.3113 - Min 0.3026)
Color Silver
Corrosion Resistant Yes
Diameter 5/16"
Drive Style External Hex
Elongation 30%
FT = Full Thread Yes
Hardness 100 Rockwell B
Head Height Max 0.211
Head Style Hex
Material Stainless Steel 18-8
Overall Head Height Max 0.211 - Min 0.195
Product Type Hex Tap Bolts
Reduction 40%
Standards Met ANSI B18.2.1
Tensile PSI 100,000 - 125,000
Thread Direction Right Hand
Thread Pitch (Count) 18
Thread Standard UNC
Thread Type Coarse
Threaded Length Fully Threaded
Tolerance (IFI)Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Wrench Size 1/2"
Yield PSI 55,000 - 75,000 See Less

7/16"-14 Hex Tap Bolt 18-8 Stainless Steel

7/16"-14 STAINLESS STEEL HEX TAP BOLTS

Diameter - Thread Pitch: 7/16" - 14

---

• 7/16"-14
• Hexagon head designed to be driven by a wrench or socket
• tap bolts differ from hex cap screws due to variations of threading at larger sizes
• 18-8 Stainless steel tap screws offer protection from weather and corrosive environments
• Rust resistant in fresh water environments
• For salt water environments use the 316 stainless steel version

Diameter x Thread Pitch x Length from Under Head

PRODUCT SPECIFICATIONS
Across Flats (Width) 5/8", Max 0.625 - Min 0.612
ANSI B18.2.1
Body Diameter 7/16" (Max 0.4375 - Min 0.4305)
Color Silver
Corrosion Resistant Yes
Diameter 7/16"
Drive Style External Hex
Elongation 30%
FT = Full Thread Yes
Hardness 100 Rockwell B
Head Height Max 0.291
Head Style Hex
Material Stainless Steel 18-8
Overall Head Height Max 0.291 - Min 0.272
Product Type Hex Tap Bolts
Reduction 40%
Standards Met ANSI B18.2.1
Tensile PSI 100,000 - 125,000
Thread Direction Right Hand
Thread Pitch (Count) 14
Thread Standard UNC
Thread Type Coarse
Threaded Length Fully Threaded
Tolerance (IFI)Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Wrench Size 5/8"
Yield PSI 55,000 - 75,000

Tap Bolts
Hex Tap bolts, also known as fully-threaded hex bolts, feature a pointed end. They are designed to be used in a drilled or tapped hole where a cap screw or stud would be impractical, and they are useful in a variety of automotive and industrial applications. Raaj Sagar Steels supplies grades 2, 5, 8 and stainless steel tap bolts. Stainless steel tap bolts are made from 18-8 stainless steel and used in environments corrosive to carbon steel.

Grade 2, 5, and 8 Tap Bolts
Grade 2 Tap Bolts: A low carbon, hex head bolt with a machined point and fully threaded. Grade-2 tap bolts are made from AISI 1006 – 1025 or equivalent steel, and to be used in drilled and tapped holes that are threaded full length. They can be used instead of a stud or nut.

Grade 5 Tap Bolts: A fully threaded hex bolt made from AISI -1541 or equivalent medium carbon steel and heat treated. 4037 modified steel (alloy) is also acceptable. Grade-5 tap bolts are commonly used to mount motors to machinery or other automotive applications.

Grade 8 Tap Bolts: A tap bolt made from medium carbon alloy and heat treated. Grade-8 tap bolts are used in automotive and fleet industries where greater tensile strength is required that can be met by the Grade-5 bolt.

Fully Threaded Hex Tap Bolts: Dimensions & Mechanical Properties

 * Click on the nominal size to find products.

 

Stainless Steel Hanger Bolt | Stainless Steel Bolts Manufacturers in Mumbai India

Dimension”

Stainless Steel Fully Threaded Hanger Bolts

 

Stainless Steel Plain Center Hanger Bolts

Stainless Hanger Bolt Dimensions

Plain Steel Hanger Bolt Dimensions

Machine Hex Bolt | Stainless Steel Machine Bolt | Stainless Steel Bolts Manufacturers in Mumbai India

Machine Bolts

Machine bolts are used to fasten wood to wood, wood to metal and metal to metal. Similar to a hex cap screw, a machine bolt will differ in these four ways: its point will not be chamfered or rounded; it will be available in larger sizes (diameters); it will not have an underhead washer bearing surface; and it will be manufactured to less exacting standards. Depending on head style, machine bolts are also known as: 

hex bolts, square bolts.

They are used with nuts and internally threaded (tapped) holes.

Threads are standard right-hand and often Unified inch coarse series (UNC, Unified National Coarse). Short lengths are fully threaded while longer lengths follow a standard formula: for bolts 6" and shorter, the minimum threaded length is two times the basic thread diameter plus 1/4", and for lengths greater than 6", two times the diameter plus 1/2".

Typically, machine bolt sizes range from 1/4" to 1 1/4" for square heads and 3/8" to 1 3/4" in diameter for hex heads, and lengths span from about 3/4" to 18" for square and 6 1/2" to 24" for hex heads. Measure length from under the head to the threaded end of the bolt.

Both square and hex heads are available. The size of the head varies with the size of the machine bolt. Since it is externally wrenched, sufficient space around the head must be allowed for wrench clearance. Tables 1 and 2 list head width across flats, which is wrench size, and across corners, head height and minimum threaded length.

Machine bolts are available in Grade 2. Steel is the standard material, and plain finish, which lacks a surface treatment to inhibit rust, is common.

When installing in wood, drill holes no more than 1/16" larger than the bolt size. If you drill into an untreated area of treated lumber, saturate the hole with a preservative to prevent the migration of decay fungi. In addition, always use a large diameter washer under the head and nut to distribute clamping force over a larger area and to minimize compression of the wood. Bolts should be retightened after about a year then checked yearly for tightness.

Machine and lag bolts are the preferred fasteners for fastening heavy wood members in structures. Machine bolts, in comparison to lag bolts, offer increased rigidity and load-carrying capacity but require a through-hole and access to both sides of the joint for wrenching the head and nut. Lag bolts, despite their lower lateral strength, are useful when access to one side of the joint is limited, the appearance of a nut is undesirable or through-bolt length is excessive. When compared to carriage bolts, machine bolts are available in larger sizes and are often preferable because carriage bolts are not designed to accept a washer under their head. However, carriage bolts are available in hot dip galvanized and stainless steel types.

Refer to American Society of Mechanical Engineers Standard ASME B18.2.1, Square and Hex Bolts and Screws, for specifications relating to machine bolts.

Stainless Steel Plow Bolts | Stainless Steel Bolts Manufacturers in Mumbai India

Plow Bolt - Pin

This plow bolt has a smooth flat countersunk head with a small square section underneath that locks into the surface when tightened. Termed a plow bolt because they were originally used on the manufacturing of plows. We carry a wide variety of diameters and lengths. Please visit our secure on-line store for prices and sizes. Grade 5 plow bolts are used in road graders, scoop shovels and other heavy duty equipment where a smooth surface is required.

We Stock: 3/8-16, 7/16-14, 1/2-13, 5/8-11

Plow Bolts - Plow Bolt Dimensions

Plow bolts date back to about 1850 and are used to attach the plow share (blade) to the frog (frame) and allow earth to pass over their heads without obstruction to the moldboard. They are also used to fasten the blade to bulldozers and motor graders. Plow bolts have a small round countersunk head and a square neck—the width of the square (measured across the flats) is the same size as the nominal diameter of the bolt. The top of the head can be flat (for plows) or dome (convex) shaped (for dozers/graders); the conical (tapered) bearing surface of a plow bolt is 80°.

Threads are standard right-hand and Unified inch coarse series (UNC, Unified National Coarse). Short lengths are fully threaded while longer lengths follow a standard formula: the minimum threaded length is two times the basic bolt diameter plus 1/4".

Typical plow bolt sizes range from 3/8" to 3/4" in diameter for flat heads and 5/8" to 1" for dome heads. Depending on size, lengths span from about 1" to 4" for flat heads and 1 1/2" to 7" for dome heads. For flat heads, length is measured from the top of the head to the threaded end of the bolt; for dome heads, measure length from the largest diameter point of the head (where the dome top meets the conical bearing surface) to the extreme end of the bolt.

The size of the head varies with the size of the bolt. Table 1 lists head diameter, depth of square and head, square neck width and minimum threaded length of #3 flat head plow bolts.

Grade 5, steel, zinc plated, and Grade 8, steel, yellow zinc plated, are common grades, material and finishes.

Refer to American Society of Mechanical Engineers Standard ASME B18.9, Plow Bolts, for specifications relating to plow bolts.

Table 1. #3 Flat Head Plow Bolt Dimensions. Nominal size in fractional and decimal inches, head diameter, head depth (depth of square and head), square width and minimum threaded length, in inches. (Note: Average size is calculated and rounded to the nearest 64th.)

Plow Bolts Sizes

A plow bolt is a type of fastener that is used for making mechanical connections that require a smooth, or flush, surface at the location where the bolt head protrudes. These were so named because of their early use in the manufacture of plows.We produce premium quality Plow Bolts from Stainless Steels,Grade 8, Super Alloys,Duplex steels & Super Duplex,Copper & Copper Alloys,Aluminum Alloys,Bronze alloys ,Titanium grades with ASTM/ASME/DIN Standards & Specifications.

UNC Domed Countersunk Square Plow Bolt #3 SAE-5(8.8) B18.9

UNC Domed Countersunk Square Plow Bolt #3 SAE-5(8.8) B18.9

UNC Domed Countersunk Square Plow Bolt #3 SAE-8(10.9) B18.9

UNC Domed Countersunk Square Plow Bolt #3 SAE-8(10.9) B18.9

UNC Countersunk Square Plow Bolt SAE-8(10.9) B18.9

UNC Countersunk Square Plow Bolt SAE-8(10.9) B18.9

UNC Eliptical Countersunk Square Plow Bolt Steel

UNC Eliptical Countersunk Square Plow Bolt Steel

UNC Countersunk Square Plow Bolt Grade-A(4.6) B18.9

UNC Countersunk Square Plow Bolt Grade-A(4.6) B18.9

UNC Countersunk Square Plow Bolt SAE-5(8.8) B18.9

UNC Countersunk Square Plow Bolt SAE-5(8.8) B18.9

UNC Countersunk Nib Bolt SAE-8(10.9) B18.9

UNC Countersunk Nib Bolt SAE-8(10.9) B18.9

BSW Whitworth Countersunk Square Plow Bolt Grade-4.6 BS325

BSW Whitworth Countersunk Square Neck Plow Bolt Grade-4.6 BS325

BSW Whitworth Countersunk Square Plow Bolt Grade- 4.6 BS 325

TABLE 5

Stainless Steel Stove Bolt | stainless steel Round Slot Stove Bolts

Typical stove bolt sizes are 1/8" (which is a 6-32 screw size), 5/32" (8-32), 3/16" (10-24), 1/4-20, 5/16-18 and 3/8-16. Lengths range from about 3/8" to 6". Measure the length of a flat head screw from the top of the head to the threaded end of the bolt; measure round heads from under the head.

Stove Bolt Dimensions for Flat Heads
Nominal Size		Head
		Diameter	Height
Fraction	Decimal	Avg	Ref
1/8 [#6]	0.1380	1/4	5/64
5/32 [#8]	0.1640	19/64	3/32
3/16 [#10]	0.1900	11/32	7/64
1/4	0.2500	29/64	5/32
5/16	0.3125	37/64	3/16
3/8	0.3750	11/16	15/64

Table 1. Slotted Flat Head Stove Bolt Dimensions. Nominal size in fractional and decimal inches, and head diameter and height, in inches. (Note: Average size is calculated and rounded to nearest 64th; reference dimension is rounded to nearest 64th.

Stove Bolt Dimensions for Round Heads
Nominal Size		Head
		Diameter	Height
Fraction	Decimal	Avg	Avg
1/8 [#6]	0.1380	1/4	3/32
5/32 [#8]	0.1640	19/64	7/64
3/16 [#10]	0.1900	11/32	1/8
1/4	0.2500	29/64	11/64
5/16	0.3125	37/64	13/64
3/8	0.3750	11/16	1/4

Table 2. Slotted Round Head Stove Bolt Dimensions. Nominal size in fractional and decimal inches, and head diameter and height, in inches. (Note: Average size is calculated and rounded to nearest 64th.)

Stainless Steel Elevator Bolts | Stainless Steel Bolts Manufacturers in Mumbai India

Elevator Bolt Specifications & Technical Information

Elevator Bolts: Dimensions & Sizes

 * Length of an elevator bolt is measured from the top of the head to the extreme end of the bolt.

 

Stainless Steel Conelock Nut Suppliers in India

Conelock Nut
Known as: Prevailing Torque Lock Nut & Stover Grade C

Type A = NCLA020—-Z1

Type B = NCLB050—-Z1

Type C = NCLC080—-Z1

Stainless Steel Slotted Hex Nut Suppliers in India

Slotted Hex Nut Dimensions Available At Raaj Sagar Steels

Slotted Hex Nut (Low Carbon Steel)

Plain = NZ020—-

Zinc = NZ020—-Z1

ANSI / ASME B18.2.2

Full Range of Fastener Products both Imperial & Metric. Dimensions range from M3 to M72 and quantities from 1 to 10,000.

Stainless Steel Poly Nut Suppliers in India

Poly Nut

Note: Smaller Head Flange than Rivet Nut for nearly flush application

Stainless Steel Reversible Locknuts Suppliers in India

Reversible Locknuts

(2 Way Locknut, Center Locknut)

Finished Pattern

Zinc = N2W020—-Z1

Jam Pattern

Zinc = N2WJ020—-Z1

Disclaimer: The dimensions listed are for reference only. Sizes not listed may be available off the shelf or can be manufactured to customer requirements.

Stainless Steel Anco Lock Nuts Suppliers in India

ANCO® PN-LOC®: The Original Structural Locknut

The ANCO® PN-LOC® is our proprietary, all metal, self-locking nut that features a stainless steel ratchet pin. Coupled with a unique controlled lock indention, this non-breakable ratchet pin limits damage to bolt threads, and the removal of galvanizing while ensuring consistent locking torque. This is the nut upon which we built our reputation.

All metal self-locking nut with a stainless steel ratchet pin.

Available in American Standard and Metric; Hex finished and heavy nuts.

• Patented, Non-breakable Stainless Steel Pin
• Limits the removal of galvanizing and damage to bolt threads.
• Unique controlled lock indention ensures consistent locking torque
• Available in METRIC Sizes

Available In

American standard and Metric Hex Finished Nuts and Heavy Nuts

Materials

Steel grade 2-5-8, 2H/DH and stainless steel

Thread

UNC, UNF or 8UN Series, Class 2B, 3B, Left Hand Thread and Metric

Finish

Plain, zinc, cadmium, hot dip galvanized, and Xylan/Tefl on, as well as other platings and coatings

Anco Locknuts

Stainless Steel Panel Nut Suppliers in India

Panel Nut Dimensions

Panel Nut

Zinc = NP020—-Z1

Disclaimer: The dimensions listed are for reference only. Sizes not listed may be available off the shelf or can be manufactured to customer requirements.

HV 14399-4 Bolts & Nuts

Heavy Hex Bolts Standard

EN 14399 - 4

EN 14399-4 Dimensions of bolts

Specification for bolts and reference standards

Important Note

Preloaded bolted assemblies are very sensitive to differences in manufacture and lubrication. Therefore it is important that the assembly is supplied by one manufacturer who is always responsible for the function of the assembly. For the same reason, it is important that the coating of the assembly is under the control of one manufacturer. Beside the mechanical properties of the components, the functionality of the assembly requires that the specific preload can be achieved if the assembly is tightened with a suitable procedure. For this purpose a test method for the suitability of the components for preloading was created, which will demonstrate whether the function of the assembly is fulfilled.

Din 933/Din EN ISO 4017 Hex Set Screws

DIN 933 / DIN EN ISO 4017

Hex head screws

Specification for bolts and reference standards

8.8 / 10.9 / 12.9 Mechanical and physical properties

HV Bolts & Nuts Weight Count Chart - Dast Guideline 021, Bigger & Large Diameter Bolts

HV-BOLTS SETS WEights in kg/100 pcs

Weights of HV Bolts Sets

Dast Guideline 021 Bolt & Nut Weight Chart | Hot Dip Galvanised Hv Bolt & Nut Weight Count Chart | Bigger Diameter Bolt Weight Count Chart | Large Diameter Bolt & Nut Weight Count Chart

hv bolts nuts - hv clamping length - clamping length bolt & nuts

DIN 125 A (ISO 7089) - Washers, DIN 912 / DIN EN ISO 4762 Socket Cap Screws, High Tensile HV Bolts & Nuts | HDG

CLAMPING LENGTH BOLT - Clamping pattern with large width across flats

Key Tags: Clamping length Bolt & nuts | Clamping Length Dast Guideline 021 Bolt & Nut | DASt guideline 021 bolt & nut | Dast Guideline 021 Bolt & Nut Weight Chart

Din 934/Din EN ISO 4032 Hex Head Nuts

DIN 934 / DIN EN ISO 4032

Hex head nuts

Specification for nuts and reference standards

If you don't see what you're looking for just call one of our team members at +91-22-6659 5285 Or Mail Us inquiry@raajsagarsteels.com. No inquiry is too large or too small, we specialize in locating hard to find items. If you do see what you are looking, we would love to assist you and give you a quote today!

24 Hrs. Online Whatsapp Number   Contact Person: Mr. Milap Mehta - Cell: +91-9869 532 584