• Stud Bolt Manufacturers in India - Astm A193 B8, Din 2510 Stud Bolt, Din 939 Stud Bolt, Din 938 Stud Bolt Specification, Din 975 Stud Bolt Dimensions, 304 Stainless Stud Bolt Sizes
  • Stud Bolts Manufacturers

    Din Standard Stud Bolt Manufacturers in Mumbai India

    Stud Bolt Din 976 Suppliers, Din 976-1 Stud Bolts Distributors, Stud Bolt Din 976-1 Stockist, Stud Bolt Din 939 Stockholder, Stud Bolt Din 938 Wholesaler, Stud Bolt Din 975 Manufacturer, Stud Bolt Din 933 Dealers India

    Din Stud Bolt Standard | Din Stud Bolt Dimensions & Din Flange Stud Bolt Lengths | Din Standard For Stud Bolt | Stud Bolt For Din Flange | Stud Bolt Dimensions For Din Flanges

    Types of Stud Bolts

    Monel Stud Bolts
    Inconel Stud Bolts
    Nickel Stud Bolts
    Cupro Nickel Stud Bolts
    Hastelloy Stud Bolts
    Stud Bolts For Flanges
    Titanium Stud Bolts
    Carbon Steel Stud Bolts
    Nickel Alloy Stud Bolts
    Nickel Stud Bolts
    Copper Nickel Stud Bolts
    Alloy Steel Stud Bolts
    Super Duplex Stud Bolts
    Duplex Steel Stud Bolts
    Brass Stud Bolts
    Copper Stud Bolts


    Stainless Steel Stud Bolts
    Stainless Steel 347 Stud Bolts
    Stainless Steel 904l Stud Bolts
    Stainless Steel 304 Stud Bolts
    Stainless Steel 310 Stud Bolts
    Stainless Steel 316 Stud Bolts
    Stainless Steel 317 Stud Bolts
    Stainless Steel 321 Stud Bolts


    A193 SS Stud Bolts
    Astm A453 Grade 660
    High Tensile Stud Bolts
    Stud Bolt Torque Chart

    Table of Contant

    Stud Bolts Material
    Types of Stud Bolts
    Types of Threaded Rods
    IMPERIAL - ANSI B16.5 Stud Bolts
    METRIC - DIN 976 Stud Bolts Dimensions
    Din 2510 Stud Bolt Dimensions
    Din 939 Stud Bolt Dimensions
    Din 938 Stud Bolt Dimensions
    Din 975 Stud Bolt Dimensions

    Finished studbolts and studbolt assemblies are available from stock in both Imperial and Metric threads and in a range of different finishes. Our studbolts are widely used in the Petrochemical industry and are covered in the ASTM standards A193 for high temperature or high pressure service, and A320 for low temperature service. A selection of the most commonly used studbolt materials are listed in the table below. For the full list of materials available please see our materials section above.

    Grade Material
    A193 B7, B7M Chromium-Molybdenum, Alloy Steel, AISI 4140
    A193 B16 Chromium-Molybdenum-Vanadium, Alloy Steel
    A193 B8 Type 304 Stainless Steel, Carbide Solution Treated
    A193 B8 Class 2 Type 304 Stainless Steel, Carbide Solution Treated, Strain Hardened
    A193 B8M Type 316 Stainless Steel, Carbide Solution Treated
    A193 B8M Class 2 Type 316 Stainless Steel, Carbide Solution Treated, Strain Hardened
    A320 L7, L7M Chromium-Molybdenum, Alloy Steel, AISI 4140, Low Temperature Service

    STUD BOLTS

    Stud bolts

    DIN 835 stud, metal end – 2d
    DIN 938 stud, metal end – 1d
    DIN 939 stud, metal end – 1,25 d
    DIN 940 stud, metal end – 2,5 d
    DIN 949-1 studs with metric interference thread MFS;
    Length of engagement =2d
    DIN 949-2 studs with metric interference thread MFS;
    Length of engagement =2,5d
    special stud sizes according to your drawing or sample

    Dimensions:
    M 5 - M 100

    Property classes/materials:
    5.6, 5.8, 8.8, 10.9, steel, stainless steel AISI 304 (A2-70), AISI 316 (A4-70) further materials on request

    Surface treatment:
    self colour, bright zinc plated (bzp), thick film passivated, hot-dip galvanized, phosphated, micro layer corrosion protection systems e.g. Dacromet, Geomet.

    In stock:
    DIN 938 and DIN 939 in 5.8 and 8.8 from M 6 to M 24 in standard sizes deliverable in small boxes

    Engineering studs

    We manufacture engineering studs, stud bolts and double end studs according to your drawing or sample.

    Dimensions:
    M 6 - M 120

    Length:
    Up to 6000 mm

    Property classes/materials:
    4.8, 5.6, 5.8,10.9, stainless steel AISI 304 (A2-70), AISI 316 (A4-70) further materials on request

    Surface treatment:
    self colour, bright zinc plated (bzp), thick film passivated, hot-dip galvanized, phosphated, micro layer corrosion protection systems e.g. Dacromet, Geomet

    Types:
    reduced shaft with rolled thread double end studs with rolled or cutted thread different add-ons, e.g. with chamfer, stamped if required

    THREADED RODS AND STUDS

    DIN: THREADED RODS AND STUDS
    DIN 976

    Dimensions:
    metric ISO thread M 6- M 120
    fi ne pitch thread M 8x1 - M 64x4
    UNC/UNF thread 5/16” - 1 ½”
    trapezoidal thread TR 10x3 - TR 60x9
    further threads on request

    Length:
    20 mm - 6000 mm

    Property classes/material:
    4.8, 5.6, 5.8, 8.8, 10.9, 12.9, steel, stainless steel AISI 304 (A2-70), AISI 316 (A4-70), brass special materials on request

    Surface treatment:
    self colour, bright zinc plated (bzp), hotdip galvanized, micro layer corrosion protection systems e.g. Dacromet, Geomet, further surfaces on request

    Types:

    • type A (without chamfer)
    • type B (with chamfer)
    • slotted
    • with coned point
    • stamped or with coloured markings

    further add-ons on request

    In stock:
    threaded rods – 4.8, 8.8, 10.9 and 12.9, AISI 304 (A2-70), AISI 316 (A4-70) in 1 m-, 2 m-, 3 m- length threaded studs – 4.8 M 8 and M 10, BZP up to 200 mm total length in standard sizes deliverable in small boxes

     

    IMPERIAL - ANSI B16.5 Stud Bolts Dimensions
    DIAMETER DIAMETER TPI (UNC) TPI (UNS)
    1/4" 0.250 20 -
    5/16" 0.313 18 -
    3/8" 0.375 16 -
    7/16" 0.438 14 -
    1/2" 0.500 13 -
    9/16" 0.563 12 -
    5/8" 0.625 11 -
    3/4" 0.750 10 -
    7/8" 0.875 9 -
    1" 1.000 8 8
    1.1/8" 1.125 7 8
    1.1/4" 1.250 7 8
    1.3/8" 1.375 6 8
    1.1/2" 1.500 6 8
    1.5/8" 1.625 - 8
    1.3/4" 1.750 5 8
    1.7/8" 1.875 - 8
    2" 2.000 4.5 8
    2.1/4" 2.250 4.5 8
    2.1/2" 2.500 4 8
    2.3/4" 2.750 4 8
    3" 3.000 4 8
    3.1/4" 3.250 4 8
    3.1/2" 3.500 4 8
    3.3/4" 3.750 4 8
    4" 4.000 4 8
    • The length (L), measured parallel to the axis, is the distance from first thread to first thread
    • End points are flat and chamfered both ends
    • Length of point on studbolts shall be not less than one nor more than two complete threads as measured from the extreme end parallel to the axis
    • Threads are UNC for all studbolt diameters 1” and smaller
    • Threads are UNS for all studbolt diameters 1.1/8” and above. These can be supplied as UNC but are non-standard.
    • Threads are Class 2A for all studbolts in accordance with ASME B1.1
    METRIC - DIN 976 Stud Bolts Dimensions
    DIAMETER (D) Thread Pitch DIAMETER (D) Thread Pitch
    M6 1.00 M36 4.00
    M8 1.25 M39 4.00
    M10 1.50 M42 4.50
    M12 1.75 M45 4.50
    M14 2.00 M48 5.00
    M16 2.00 M52 5.00
    M18 2.50 M56 5.50
    M20 2.50 M64 6.00
    M22 2.50 M72 6.00
    M24 3.00 M76 6.00
    M27 3.00 M80 6.00
    M30 3.50 M90 6.00
    M33 3.50 M100 6.00
    • The length (L), measured parallel to the axis, is the distance from end to end
    • End points are flat and chamfered both ends
    • Length of point on studbolts shall be not less than one nor more than two complete threads as measured from the extreme end parallel to the axis
    • Threads are accordance with ISO 261
    Din 2510 Stud Bolt Dimensions
    D1 Pitch D2 D3 B1 Z2
    M12 1.75 8.5 8.0 20.0 4.0
    M16 2.00 12.0 12.0 23.0 5.0
    M20 2.50 15.0 14.0 28.0 6.0
    M24 3.00 18.0 14.0 32.0 6.0
    M27 3.00 20.5 18.0 35.0 6.0
    M30 3.50 23.0 18.0 39.0 6.0
    M33 3.50 25.5 25.0 42.0 9.0
    M36 4.00 27.5 25.0 45.0 9.0
    M39 4.00 30.5 28.0 48.0 10.0
    M42 4.50 32.5 28.0 52.0 10.0
    M45 4.50 35.5 32.0 55.0 11.0
    M48 5.00 37.5 32.0 58.0 11.0
    M52 5.00 41.0 36.0 62.0 12.0
    M56 5.50 44.0 40.0 - 13.0
    • Dimensions in millimetres
    • DIN 2510 Studs are manufactured to order and can be made in any material.
    • DIN 2510 Studs are generally supplied with DIN 2510 NF Nuts (Shown below)
    D1 Pitch D2 M T S
    M12 1.75 21.0 12.0 2.0 22.0
    M16 2.00 26.0 16.0 2.0 27.0
    M20 2.50 31.0 20.0 2.0 32.0
    M24 3.00 35.0 24.0 3.0 36.0
    M27 3.00 40.0 27.0 3.0 41.0
    M30 3.50 45.0 30.0 3.0 46.0
    M33 3.50 49.0 33.0 3.0 50.0
    M36 4.00 53.5 36.0 3.0 55.0
    M39 4.00 58.5 39.0 3.0 60.0
    M42 4.50 63.5 42.0 3.0 65.0
    M45 4.50 68.5 45.0 3.0 70.0
    M48 5.00 73.5 48.0 4.0 75.0
    M52 5.00 78.5 52.0 4.0 80.0
    M56 5.50 83.5 56.0 4.0 85.0
    Din 939 Stud Bolt Dimensions
    Diameter (D) Pitch M/E 1.25xd (B1) N/E (B2) ≤ 125 N/E (B2) 125-200 N/E/ (B2) ≥ 200
    M8 1.25 10 22 28 -
    M10 1.50 12 26 32 45
    M12 1.75 15 30 36 49
    M14 2.00 18 34 40 53
    M16 2.00 20 38 44 57
    M18 2.50 22 42 48 61
    M20 2.50 25 46 52 65
    M22 2.50 28 50 56 69
    M24 3.00 30 54 60 73
    M27 3.00 35 60 66 79
    M30 3.50 38 66 72 85
    M33 3.50 42 72 78 91
    M36 4.00 45 78 84 97
    M39 4.00 50 84 90 103
    M42 4.50 52 90 96 109
    M45 4.50 58 98 102 115
    M48 5.00 60 102 108 121
    M52 5.00 65 110 116 129
    • Dimensions in millimetres
    • The length (L) is the nominal length of the stud. This is the length given when ordering.
    • The overall length of the stud is the nominal length plus the length of the metal end (B1)
    • Studs are manufactured to order and can be made in any material.
    Din 938 Stud Bolt Dimensions
    Diameter (D) Pitch M/E 1xd (B1) N/E (B2) ≤ 125 N/E (B2) 125-200 N/E/ (B2) ≥ 200
    M8 1.25 8 22 28 -
    M10 1.50 10 26 32 45
    M12 1.75 12 30 36 49
    M14 2.00 14 34 40 53
    M16 2.00 16 38 44 57
    M18 2.50 18 42 48 61
    M20 2.50 20 46 52 65
    M22 2.50 22 50 56 69
    M24 3.00 24 54 60 73
    M27 3.00 27 60 66 79
    M30 3.50 30 66 72 85
    M33 3.50 33 72 78 91
    M36 4.00 36 78 84 97
    M39 4.00 39 84 90 103
    M42 4.50 42 90 96 109
    M45 4.50 45 96 102 115
    M48 5.00 48 102 108 121
    M52 5.00 52 110 116 129
    • Dimensions in millimetres
    • The length (L) is the nominal length of the stud. This is the length given when ordering.
    • The overall length of the stud is the nominal length plus the length of the metal end (B1)
    • Studs are manufactured to order and can be made in any material.

    Table according to DIN 975:

    Makings:
    Steel: 4.8, 5.8, 8.8, 10.9, 12.9
    Stainless: A2,A4
    Non Ferrous: Brass
    Thread: 6g

    dimensions in mm
    Thread size d Lenght Mass (7,85 kg/dm3), in kg per 1000 units
    M2 - - 1000±10 18,7
    M2,5 - - 1000±10 30
    M3 - - 1000±10 44
    (M3,5) - - 1000±10 60
    M4 - - 1000±10 78
    M5 - - 1000±10 124
    M6 - - 1000±10 177
    M8 M8x1 - 1000±10 319
    M10 M10x1,25 M10x1 1000±10 500
    M12 M12x1,25 M12x1,25 1000±10 725
    (M14) (M14x1,5) - 1000±10 970
    M16 M16x1,5 - 1000±10 1330
    (M18) (M18x1,5) - 1000±10 1650
    M20 M20x1,5 - 1000±10 2080
    (M22) (M22x1,5) - 1000±10 2540
    M24 M24x2 - 1000±10 3000
    (M27) (M27x2) - 1000±10 3850
    M30 M30x2 - 1000±10 4750
    (M33) (M33x2) - 1000±10 5900
    M36 M36x3 - 1000±10 3900
    (M39) (M39x3) - 1000±10 8200
    M42 M42x3 - 1000±10 9400
    (M45) (M45x3) - 1000±10 11000
    M48 M48x3 - 1000±10 12400
    (M52) (M52x3) - 1000±10 14700

    If you don�t see what you�re looking for just call one of our team members at +91-22-6659 5285 Or Mail Us inquiry@raajsagarsteels.com. No inquiry is too large or too small, we specialize in locating hard to find items. If you do see what you are looking, we would love to assist you and give you a quote today!

    24 Hrs. Online Whatsapp Number   Contact Person: Mr. Milap Mehta - Cell: +91-9869 532 584

    STUD BOLTS Ready Stock

    Our Overseas Sales Distributors

    Stud Bolts Suppliers In Uae
    Stud Bolts Suppliers In Mumbai
    Stud Bolts Suppliers In India
    Stud Bolts Suppliers In Dubai
    Stud Bolts Suppliers In Kuwait
    Stud Bolts Suppliers Usa
    Stud Bolts Suppliers Uk
    Stud Bolts Supplier In Uae
    Stud Bolt Suppliers In Abu Dhabi
    Stud Bolt Supplier Malaysia
    Stud Bolt & Nut Suppliers
    Stud Bolts Nuts Manufacturers
    Stud Bolt Supplier Philippines
    Stud Bolt Suppliers Perth
    Stud Bolt Supplier In Qatar
    Stud Bolt Supplier In Malaysia
    Stud Bolt Supplier In Kuwait
    Stud Bolt Supplier In Singapore
    Stud Bolt Supplier Thailand


    Quick Enquiry

    Others Grades

    Material Grades Stud Bolts

    Super Duplex steel 2507
    Stainless steel smo254
    Stainless steel xm19
    Super Duplex
    Astm a194 gr 8c
    Astm a194 gr 8
    Astm a194 gr 8m
    Astm a194 gr 8mlcun
    Astm a194 gr 8t
    Astm a193 b6
    Astm a193 b6x
    Astm a193 b8c
    Astm a193 b8 cl2
    Astm a193 b8
    Astm a193 b8m
    Astm a193 b8mlcun
    Astm a193 b8t
    Astm a194 gr 6
    Astm a194 gr 6x
    Hastelloy b2
    Hastelloy c22
    Hastelloy c276
    Hastelloy

    Incoloy 800
    Incoloy 800ht
    Incoloy 825
    Inconel 600
    Inconel 601
    Inconel 625
    Inconel 718
    Inconel
    Monel 400
    Monel
    Monel k500
    Nickel 200 201
    Nickel Alloy
    SS 304 304h 304l
    SS 310s 310h
    SS 316 316h 316l 316ti
    SS 317 317l
    SS 321 321h
    SS 347 347h
    Stainless Steel
    Stainless steel 904l
    1.4980
    Alloy 20
    Duplex steel
    Duplex steel