d1 | m | e | s |
---|---|---|---|
M6 | 18 | 11.05 | 10 |
M8 | 24 | 14.38 | 13 |
M10 | 30 | 18.9 | 17 |
M12 | 36 | 21.1 | 19 |
M16 | 48 | 26.75 | 24 |
M20 | 60 | 33.53 | 30 |
M24 | 72 | 41.6 | 36 |
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
Size | Weight |
---|---|
M4 | 1.12 |
M5 | 2.30 |
M6 | 3.16 |
M7 | 3.96 |
M8 | 7.35 |
M10 | 15.8 |
M12 | 20.0 |
M14 | 27.0 |
M16 | 38.9 |
M18 | 57.5 |
M20 | 75.2 |
M22 | 93.0 |
M24 | 131 |
M27 | 192 |
M30 | 264 |
M33 | 333 |
M36 | 447 |
M39 | 584 |
M42 | 710 |
M45 | 860 |
M48 | 1060 |
M52 | 1300 |
DIN6926 Nylon Insert Hex Flange Nut - Product Drawing - d1=ID,d2=flange dia.,h=thickness,s=waf,e=wac
d | d2max. | h max. | m | s max |
---|---|---|---|---|
M5 | 11.8 | 7.1 | 4.7 | 8 |
M6 | 14.2 | 9.1 | 5.7 | 10 |
M8 | 17.9 | 11.1 | 7.6 | 13 |
M10 | 21.8 | 13.5 | 9.6 | 15 |
M12 | 26 | 16.1 | 11.6 | 18 |
M14 | 29.9 | 18.2 | 13.3 | 21 |
M16 | 34.5 | 20.3 | 15.3 | 24 |
DIN6926 Nylon Insert Hex Flange Nut - Product Drawing - d1=ID,d2=flange dia.,h=thickness,s=waf,e=wac
d | d2max. | h max. | m | s max |
---|---|---|---|---|
M5 | 11.8 | 7.1 | 4.7 | 8 |
M6 | 14.2 | 9.1 | 5.7 | 10 |
M8 | 17.9 | 11.1 | 7.6 | 13 |
M10 | 21.8 | 13.5 | 9.6 | 15 |
M12 | 26 | 16.1 | 11.6 | 18 |
M14 | 29.9 | 18.2 | 13.3 | 21 |
M16 | 34.5 | 20.3 | 15.3 | 24 |
DIN928 Square Weld Nut - product drawing - d1=dia.,m+h=overall height,e=WAC,s=WAF
d1 | e min. | h ±0.1 | m h14 | s h14 | Sheet Thickness | Proof Load N | |
---|---|---|---|---|---|---|---|
min. | max. | ||||||
M4 | 9 | 0.6 | 3.5 | 7 | 0.75 | 3 | 6800 |
M5 | 12 | 0.8 | 4.2 | 9 | 0.88 | 3.5 | 11000 |
M6 | 13 | 0.8 | 5 | 10 | 0.88 | 4 | 15500 |
M8 | 18 | 1 | 6.5 | 14 | 1 | 4.5 | 28300 |
M10 | 22 | 1.2 | 8 | 17 | 1.25 | 5 | 44800 |
M12 | 25 | 1.4 | 9.5 | 19 | 1.5 | 5 | 65300 |
DIN986 Self Locking Domed Cap Nuts With Nylon Insert - product drawing - d1=ID, h=overall height, m=thread depth, s=waf,e=wac
d1 | e min. | s | m | h |
---|---|---|---|---|
M4 | 7.66 | 7 | 2.9 | 9.6 |
M5 | 8.79 | 8 | 4.4 | 10.5 |
M6 | 11.05 | 10 | 4.9 | 12 |
M8 | 14.38 | 13 | 6.44 | 14 |
M10 | 18.9 | 16 | 8.04 | 18.1 |
M12 | 21.1 | 18 | 10.37 | 22.5 |
M16 | 26.75 | 24 | 14.1 | 27.5 |
M20 | 30 | 16.9 | 35 |
d1 | d2 | d3 | d4 | h | k |
---|---|---|---|---|---|
M6 | 28 | 16 | 17 | 36 | |
M8 | 36 | 20 | 20 | 36 | 8 |
M10 | 45 | 25 | 25 | 45 | 10 |
M12 | 54 | 30 | 30 | 53 | 12 |
M14 | 54 | 30 | 30 | 53 | 12 |
M16 | 63 | 35 | 35 | 62 | 14 |
M20 | 72 | 40 | 40 | 71 | 16 |
M24 | 90 | 50 | 50 | 90 | 20 |
M27 | 90 | 50 | 50 | 90 | 20 |
M30 | 108 | 65 | 60 | 109 | 24 |
M36 | 126 | 75 | 70 | 128 | 28 |
M42 | 144 | 85 | 80 | 147 | 32 |
M48 | 166 | 100 | 90 | 168 | 38 |
M56 | 184 | 110 | 100 | 187 | 42 |
M64 | 206 | 120 | 110 | 208 | 48 |
d1 | d2 | e | g | h |
---|---|---|---|---|
M4 | 6 | 18 | 1.7 | 8.5 |
M5 | 8 | 24 | 2.3 | 11 |
M6 | 10 | 30 | 2.7 | 15 |
M8 | 13 | 36 | 3.6 | 18 |
M10 | 17 | 48 | 4.6 | 23 |
M12 | 20 | 62 | 5.6 | 31 |
M16 | 26 | 70 | 6.5 | 35 |
M20 | 32 | 86 | 7 | 44 |
M24 | 41 | 106 | 8.6 | 53.5 |
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
Diameter | Weight |
---|---|
3 | 0.017 |
4 | 0.022 |
5 | 0.066 |
6 | 0.084 |
7 | 0.121 |
8 | 0.158 |
9 | 0.30 |
10 | 0.34 |
11 | 0.41 |
12 | 0.50 |
13 | 0.53 |
14 | 0.64 |
15 | 0.67 |
16 | 0.70 |
17 | 0.82 |
18 | 1.11 |
19 | 1.22 |
20 | 1.30 |
21 | 1.42 |
22 | 1.50 |
24 | 1.77 |
25 | 1.90 |
26 | 1.96 |
28 | 2.92 |
29 | 3.20 |
30 | 3.31 |
32 | 3.54 |
34 | 3.80 |
35 | 4.00 |
36 | 5.00 |
38 | 5.62 |
40 | 6.03 |
42 | 6.50 |
45 | 7.50 |
48 | 7.90 |
50 | 10.2 |
52 | 11.1 |
55 | 11.4 |
56 | 11.8 |
58 | 12.6 |
60 | 12.9 |
62 | 14.3 |
63 | 15.9 |
65 | 18.20 |
68 | 21.80 |
70 | 22.00 |
72 | 22.50 |
75 | 24.60 |
78 | 26.20 |
80 | 27.30 |
82 | 31.20 |
85 | 36.40 |
88 | 41.20 |
90 | 44.50 |
95 | 49.00 |
100 | 53.70 |
105 | 80 |
110 | 82 |
115 | 84 |
120 | 86 |
125 | 90 |
130 | 100 |
135 | 104 |
140 | 110 |
145 | 115 |
150 | 120 |
155 | 135 |
160 | 150 |
165 | 160 |
170 | 170 |
175 | 180 |
180 | 190 |
185 | 200 |
190 | 210 |
195 | 220 |
200 | 230 |
210 | 248 |
220 | 265 |
230 | 290 |
240 | 310 |
250 | 335 |
260 | 355 |
270 | 375 |
280 | 398 |
290 | 418 |
300 | 440 |
d1 | s | e | m |
---|---|---|---|
M1 | 2.5 | 2.72 | 0.8 |
M1.2 | 3 | 3.29 | 1 |
M1.4 | 3 | 3.29 | 1.2 |
M1.6 | 3.2 | 3.48 | 1.3 |
M1.7 | 3.5 | 3.82 | 1.4 |
M2 | 4 | 4.32 | 1.6 |
M2.3 | 4.5 | 4.95 | 1.8 |
M2.5 | 5 | 5.45 | 2 |
M2.6 | 5 | 5.51 | 2 |
M3 | 5.5 | 6.01 | 2.4 |
M3.5 | 6 | 6.01 | 2.8 |
M4 | 7 | 7.66 | 3.2 |
M5 | 8 | 8.76 | 4 |
M6 | 10 | 11.05 | 5 |
M7 | 11 | 12.12 | 5.5 |
M8 | 13 | 14.38 | 6.5 |
M10 | 17 | 18.9 | 8 |
M12 | 19 | 21.1 | 10 |
M14 | 22 | 24.49 | 11 |
M16 | 24 | 26.75 | 13 |
M18 | 27 | 29.56 | 15 |
M20 | 30 | 32.95 | 16 |
M22 | 32 | 35.03 | 18 |
M24 | 36 | 39.55 | 19 |
M27 | 41 | 45.2 | 22 |
M30 | 46 | 50.85 | 24 |
M33 | 50 | 55.37 | 26 |
M36 | 55 | 60.79 | 29 |
M39 | 60 | 66.44 | 31 |
M42 | 65 | 71.3 | 34 |
M45 | 70 | 76.95 | 36 |
M48 | 75 | 82.6 | 38 |
M52 | 80 | 88.25 | 42 |
M56 | 85 | 95.07 | 45 |
M60 | 90 | 100.72 | 48 |
M64 | 95 | 106.37 | 51 |
M68 | 100 | 112.02 | 54 |
M72 | 105 | 117.67 | 58 |
M76 | 110 | 123.32 | 61 |
M80 | 115 | 128.97 | 64 |
M85 | 120 | 133.11 | 68 |
M90 | 130 | 145.77 | 72 |
M95 | 135 | 151.42 | 76 |
M100 | 145 | 162.72 | 80 |
M105 | 150 | 16837 | 84 |
M110 | 155 | 174.02 | 88 |
M115 | 165 | 185.32 | 92 |
M120 | 170 | 190.97 | 96 |
M125 | 180 | 202.27 | 100 |
M130 | 185 | 207.75 | 104 |
M135 | 190 | 213.40 | 108 |
M140 | 200 | 224.70 | 112 |
M145 | 210 | 236 | 116 |
M150 | 210 | 236 | 120 |
d1 | s max. | e | m max. | w max. | n min. |
---|---|---|---|---|---|
M4 | 7 | 7.74 | 5 | 3.2 | 1.2 |
M5 | 8 | 8.87 | 6 | 4 | 1.4 |
M6 | 10 | 11.05 | 7.5 | 5 | 2 |
M8 | 13 | 14.38 | 9.5 | 6.5 | 2.5 |
M10 | 17 | 18.9 | 12 | 8 | 2.8 |
M12 | 19 | 21.1 | 15 | 10 | 3.5 |
M14 | 22 | 24.49 | 16 | 11 | 3.5 |
M16 | 24 | 26.75 | 19 | 13 | 4.5 |
M18 | 27 | 29.56 | 21 | 15 | 4.5 |
M20 | 30 | 32.95 | 22 | 16 | 4.5 |
M22 | 32 | 35.03 | 26 | 18 | 5.5 |
M24 | 36 | 39.55 | 27 | 19 | 5.5 |
M27 | 41 | 45.2 | 30 | 22 | 5.5 |
M30 | 46 | 50.85 | 33 | 24 | 7 |
M33 | 50 | 55.37 | 35 | 26 | 7 |
M36 | 55 | 60.79 | 38 | 29 | 7 |
M39 | 60 | 66.44 | 40 | 31 | 7 |
M42 | 65 | 71.3 | 46 | 34 | 9 |
M45 | 70 | 78.26 | 48 | 36 | 9 |
M48 | 75 | 82.6 | 50 | 38 | 9 |
M52 | 80 | 88.25 | 54 | 42 | 9 |
M56 | 85 | 95.07 | 57 | 45 | 9 |
M60 | 90 | 100.72 | 63 | 48 | 11 |
M64 | 95 | 106.37 | 66 | 51 | 11 |
M68 | 100 | 112.02 | 69 | 54 | 11 |
M72 | 105 | 117.67 | 73 | 58 | 11 |
M76 | 110 | 123.32 | 76 | 61 | 11 |
M80 | 115 | 128.97 | 79 | 64 | 11 |
M85 | 120 | 134.62 | 88 | 68 | 14 |
M90 | 130 | 145.77 | 92 | 72 | 14 |
M95 | 135 | 151.42 | 96 | 76 | |
M100 | 145 | 162.72 | 100 | 80 | 14 |
d1 | s | e min | d2 | h max |
---|---|---|---|---|
M4 | 7 | 7.66 | 4.2 | |
M5 | 8 | 8.79 | 5.1 | |
M6 | 10 | 11.05 | 6 | |
M8 | 13 | 14.38 | 8 | |
M10 | 17 | 18.9 | 10 | |
M12 | 19 | 21.1 | 12 | |
M14 | 22 | 24.49 | 14 | |
M16 | 24 | 26.75 | 16 | |
M18 | 27 | 29.56 | 23 | 18 |
M20 | 30 | 32.95 | 27.5 | 20 |
M22 | 32 | 35.03 | 29.5 | 22 |
M24 | 36 | 39.55 | 31 | 24 |
M27 | 41 | 45.02 | ||
M30 | 46 | 50.85 | ||
M33 | 50 | 55.37 | ||
M36 | 55 | 60.79 |
Lock Nuts Class 8/10
*All Metal Form “V” - N025 – 980-8 Zinc Plated / N026 – 980-10 Zinc Plated
DIN 980 - ISO 7042 / ANSI B18.16.3M
Coarse Thread | Class 8 | Class 10 | ||||||
---|---|---|---|---|---|---|---|---|
d | s | e | h | d2 | Pkg. | Order # | Pkg. | Order # |
M4 | 7 | 7.66 | 4.2 | — | 100 | N025-004-0000 | ||
M5 | 8 | 8.79 | 5.1 | — | 100 | N025-005-0000 | ||
M6 | 10 | 11.05 | 6 | — | 100 | N025-006-0000 | 100 | N026-006-0000 |
M8 | 13 | 14.38 | 8 | — | 100 | N025-008-0000 | 100 | N026-008-0000 |
M10 | 17 | 18.9 | 10 | — | 100 | N025-010-0000 | 100 | N026-010-0000 |
M12 | 19 | 21.1 | 12 | — | 100 | N025-012-0000 | 100 | N026-012-0000 |
M14 | 22 | 24.49 | 14 | — | 100 | N025-014-0000 | 100 | N026-014-0000 |
M16 | 24 | 26.75 | 16 | — | 100 | N025-016-0000 | 100 | N026-016-0000 |
M18 | 27 | 29.56 | 18 | 23 | 50 | N025-018-0000 | 50 | N026-018-0000 |
M20 | 30 | 32.95 | 20 | 27.5 | 50 | N025-020-0000 | 50 | N026-020-0000 |
M22 | 32 | 35.03 | 22 | 29.5 | 50 | N025-022-0000 | 50 | N026-022-0000 |
M24 | 36 | 39.55 | 24 | 31 | 50 | N025-024-0000 | 50 | N026-024-0000 |
M30 | 46 | 50.85 | 30 | — | 25 | N025-030-0000 | 25 | N026-030-0000 |
M36 | 55 | 60.79 | 36 | — | 10 | N025-036-0000 | ||
*May be volcano or collar style. Please contact us if you need a specific style. |
Prevailing Torque Hexagon Lock Nuts
A2 Stainless Similar to DIN 934
*All Metal Form (Type VM) N125 – 980-A2
DIN 980 - ISO 7042
d1 | s | e | Pkg. | Order # |
---|---|---|---|---|
M3 | 5.5 | 6.01 | 100 | N125-003-0000 |
M4 | 7 | 7.66 | 100 | N125-004-0000 |
M5 | 8 | 8.79 | 100 | N125-005-0000 |
M6 | 10 | 11.05 | 100 | N125-006-0000 |
M8 | 13 | 14.38 | 100 | N125-008-0000 |
M10 | 17 | 18.9 | 100 | N125-010-0000 |
M12 | 19 | 21.1 | 100 | N125-012-0000 |
M16 | 24 | 26.75 | 100 | N125-016-0000 |
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
Size | Weight |
---|---|
M1.6 | 0.06 |
M1.8 | 0.08 |
M2 | 0.11 |
M2.5 | 0.22 |
M3 | 0.29 |
M3.5 | 0.37 |
M4 | 0.57 |
M5 | 0.83 |
M6 | 1.60 |
M8 | 3.20 |
M10 | 7.20 |
M12 | 10.4 |
M14 | 15.9 |
M16 | 20.5 |
M18 | 29.6 |
M20 | 40.2 |
M22 | 48.3 |
M24 | 69.5 |
M27 | 101 |
M30 | 139 |
M33 | 183 |
M36 | 244 |
M39 | 316 |
M42 | 403 |
M45 | 500 |
M48 | 617 |
M52 | 755 |
Hex Nut / B Nut / Hex Nut -B / Hex Thin Nut / Half Nut / Jam Nut / Lock Nut Dimensions / Thin Nut
d1 | d2 H13 | d3 d11 | h1 | h2 | h h14 | s h13 | Sheet Thickness | Proof Load N | |||
---|---|---|---|---|---|---|---|---|---|---|---|
min. | max. | ||||||||||
M3 | 4.5 | 4.5 | 0.55 | 0-0.1 | 0.25 | 0-0.1 | 3 | 7.5 | 0.63 | 2.6 | 3800 |
M4 | 6 | 6 | 0.65 | 0.35 | 3.5 | 9 | 0.75 | 3 | 6800 | ||
M5 | 7 | 7 | 0.7 | 0.4 | 4 | 10 | 0.88 | 3.5 | 11000 | ||
M6 | 8 | 8 | 0.75 | 0-0.15 | 0.4 | 5 | 11 | 0.88 | 4 | 15500 | |
M8 | 10.5 | 10.5 | 0.9 | 0.5 | 0-0.15 | 6.5 | 14 | 1 | 4.5 | 28300 | |
M10 | 12.5 | 12.5 | 1.15 | 0-0.2 | 0.65 | 8 | 17 | 1.25 | 5 | 44800 | |
M12 | 14.8 | 14.8 | 1.4 | 0.8 | 0-0.2 | 10 | 19 | 1.5 | 5 | 65300 | |
M14 | 16.8 | 16.8 | 1.8 | 1 | 11 | 22 | 2 | 6 | 89700 | ||
M16 | 18.8 | 18.8 | 1.8 | 1 | 13 | 24 | 2 | 6 | 123000 |
DIN439 Hex Jam Nut - product drawing - d1=DIA, m=Thickness, s=WAF, e=WAC
d1 | s | e | m |
---|---|---|---|
M2 | 4 | 4.32 | 1.2 |
M3 | 5.5 | 6.01 | 1.8 |
M4 | 7 | 7.66 | 2.2 |
M5 | 8 | 8.79 | 2.7 |
M6 | 10 | 11.05 | 3.2 |
M8 | 13 | 14.38 | 4 |
M10 | 17 | 18.9 | 5 |
M12 | 19 | 21.1 | 6 |
M14 | 22 | 24.49 | 7 |
M16 | 24 | 26.75 | 8 |
M18 | 27 | 29.56 | 9 |
M20 | 30 | 32.95 | 10 |
M22 | 32 | 35.03 | 11 |
M24 | 36 | 39.55 | 12 |
M27 | 41 | 45.2 | 13.5 |
M30 | 46 | 50.85 | 15 |
M33 | 50 | 55.37 | 16.5 |
M36 | 55 | 60.79 | 18 |
DIN982 Nylon Insert Lock Nut (Tall) - Product Drawing - d1=ID, h=overall height, m=thread depth, s=waf,e=wac
d1 | s | e | m min | h |
---|---|---|---|---|
M5 | 8 | 8.79 | 3.52 | 6.3 |
M6 | 10 | 11.05 | 3.92 | 8 |
M8 | 13 | 14.38 | 5.15 | 9.5 |
M10 | 17 | 18.90 | 6.43 | 11.5 |
M12 | 19 | 21.1 | 8.3 | 14 |
M14 | 22 | 24.49 | 9.68 | 16 |
M16 | 24 | 26.75 | 11.28 | 18 |
M20 | 30 | 32.95 | 13.52 | 22 |
M24 | 36 | 39.55 | 16.16 | 28 |
d1 | e min. | h max. | m | s |
---|---|---|---|---|
M2 | 4.91 | 2.5 | 1.6 | 4.5 |
M2.5 | 5.51 | 3.8 | 2 | 5 |
M2.6 | 5.51 | 3.8 | 2 | 5 |
M3 | 6.01 | 4 | 2.4 | 5.5 |
M3.5 | 6.64 | 4.5 | 2.6 | 6 |
M4 | 7.66 | 5 | 2.9 | 7 |
M5 | 8.79 | 5 | 3.2 | 8 |
M6 | 11.05 | 6 | 4 | 10 |
M7 | 12.12 | 7.5 | 4.7 | 11 |
M8 | 14.38 | 8 | 5.5 | 13 |
M10 | 18.9 | 10 | 6.5 | 16 |
M12 | 21.1 | 12 | 8 | 18 |
M14 | 24.49 | 14 | 9.5 | 21 |
M16 | 26.75 | 16 | 10.5 | 24 |
M18 | 29.56 | 18.5 | 13 | 27 |
M20 | 32.95 | 20 | 14 | 30 |
M22 | 35.03 | 22 | 15 | 34 |
M24 | 39.55 | 24 | 15 | 36 |
M27 | 45.2 | 27 | 17 | 41 |
M30 | 50.85 | 30 | 19 | 46 |
M33 | 55.37 | 33 | 22 | 50 |
M36 | 60.79 | 36 | 25 | 55 |
M39 | 66.44 | 39 | 27 | 60 |
M42 | 72.09 | 42 | 29 | 65 |
M45 | 76.95 | 45 | 32 | 70 |
M48 | 82.6 | 48 | 36 | 75 |
d1 | s | e | m |
---|---|---|---|
M12 | 22 | 23.91 | 10 |
M16 | 27 | 29.56 | 13 |
M20 | 32 | 35.03 | 16 |
M22 | 36 | 39.55 | 18 |
M24 | 41 | 45.2 | 19 |
M27 | 46 | 50.85 | 22 |
M30 | 50 | 55.37 | 24 |
M36 | 60 | 66.44 | 29 |
DIN6923 Hex Flange Nut - Product Drawing - d=ID,d1=flange dia.,m=thickness,s=waf,e=wac
d | d1 | s | m |
---|---|---|---|
M3 | 8 | 5.5 | 3.7 |
M4 | 10 | 7 | 4.5 |
M5 | 11.8 | 8 | 5 |
M6 | 14.2 | 10 | 6 |
M8 | 17.9 | 13 | 8 |
M10 | 21.8 | 15 | 10 |
M12 | 26 | 18 | 12 |
M14 | 29.9 | 21 | 14 |
M16 | 34.5 | 24 | 16 |
M20 | 42.8 | 30 | 20 |
d1 | s | e | m |
---|---|---|---|
M8 | 13 | 14.38 | 5 |
M10 | 17 | 18.9 | 6 |
M12 | 19 | 21.1 | 7 |
M14 | 22 | 24.49 | 8 |
M16 | 24 | 26.75 | 8 |
M18 | 27 | 29.56 | 9 |
M20 | 30 | 32.95 | 9 |
M22 | 32 | 35.03 | 10 |
M24 | 36 | 39.55 | 10 |
M27 | 41 | 45.2 | 12 |
M30 | 46 | 50.85 | 12 |
M33 | 50 | 55.8 | 14 |
M36 | 55 | 61.31 | 14 |
M39 | 60 | 66.96 | 16 |
M42 | 65 | 72.61 | 16 |
M45 | 70 | 78.26 | 18 |
M48 | 75 | 83.91 | 18 |
M52 | 80 | 89.56 | 20 |
DIN917 Hexagon cup nuts - Product drawing - d1=ID, h=overall height,s=WAF,e=WAC
All measurements in millimeters (mm) s
d1 | e min. | h | s | t min. | t max. | x max. |
---|---|---|---|---|---|---|
M3 | 6.08 | 5 | 5.5 | 3 | 3.4 | 0.75 |
M4 | 7.66 | 5.5 | 7 | 4.16 | 4.64 | 1.05 |
M5 | 8.79 | 7 | 8 | 4.96 | 5.44 | 1.2 |
M6 | 11.05 | 9 | 10 | 6.71 | 7.29 | 1.5 |
M8 | 14.38 | 12 | 13 | 9.21 | 9.79 | 1.87 |
M10 | 18.9 | 14 | 16 | 10.65 | 11.35 | 2.25 |
M12 | 21.1 | 16 | 18 | 13.15 | 13.85 | |
M16 | 26.75 | 20 | 24 | 16.65 | 17.35 |
M2032.95253020.5821.42
M2439.55303623.5824.42
DIN1587 Hex Acorn Nut (Dome Nut) - Product Drawing - h=height,d1=ID,s=waf,e=wac
d1 | h | s | e |
---|---|---|---|
M3 | 6 | 5.5 | 6.08 |
M4 | 8 | 7 | 7.66 |
M5 | 10 | 8 | 8.79 |
M6 | 12 | 10 | 11.05 |
M8 | 15 | 13 | 14.38 |
M10 | 18 | 17 | 18.9 |
M12 | 22 | 19 | 21.1 |
M14 | 25 | 22 | 24.49 |
M16 | 28 | 24 | 26.75 |
M18 | 32 | 27 | 30.14 |
M20 | 34 | 30 | 33.53 |
M22 | 39 | 32 | 35.72 |
M24 | 42 | 36 | 39.98 |
d1 | s | e | m |
---|---|---|---|
M5 | 8 | 11.3 | 4 |
M6 | 10 | 14.1 | 5 |
M8 | 13 | 18.4 | 6.5 |
M10 | 16 | 22.6 | 8 |
M12 | 18 | 25.4 | 10 |
M16 | 24 | 33.9 | 13 |
d | s | e | m | m1 |
---|---|---|---|---|
M6 | 10 | 11.05 | 6 | 3.5 |
M7 | 11 | 12.12 | 7 | 4 |
M8 | 13 | 14.38 | 8 | 4.5 |
M10 | 17 | 18.9 | 9 | 5 |
M12 | 19 | 20.1 | 10 | 6 |
M14 | 22 | 24.49 | 11 | 7 |
M16 | 24 | 26.75 | 12 | 7 |
M18 | 27 | 29.56 | 13 | 8 |
M20 | 30 | 32.95 | 13 | 8 |
M22 | 32 | 35.05 | 15 | 9 |
M24 | 36 | 39.55 | 15 | 9 |
M27 | 41 | 45.2 | 17 | 11 |
M30 | 46 | 50.85 | 18 | 11 |
M33 | 50 | 55.37 | 20 | 13 |
M36 | 55 | 60.79 | 20 | 13 |
M39 | 60 | 66.96 | 22 | 13 |
M42 | 65 | 72.61 | 23 | 14 |
M45 | 70 | 78.26 | 25 | 16 |
M48 | 75 | 83.91 | 25 | 16 |
M52 | 80 | 89.56 | 27 | 18 |
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
Size | Weight |
---|---|
M6 | 4.66 |
M8 | 11 |
M10 | 20.1 |
M12 | 28.3 |
M14 | 57.2 |
M16 | 54.3 |
M18 | 95 |
M20 | 104 |
M22 | 129 |
M24 | 216 |
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
Size | Weight |
---|---|
M8 | 4.0 |
M10 | 8.6 |
M12 | 12.1 |
M14 | 18.2 |
M16 | 20.1 |
M18 | 29.6 |
M20 | 36.3 |
M22 | 43.8 |
M24 | 58 |
M27 | 90 |
M30 | 110 |
M33 | 155 |
M36 | 190 |
M39 | 260 |
M42 | 307 |
DIN6927 Hex Flange Nut - Product drawing - d1=ID, d2=OD, h=total height, m=hex height
d1 | d2 max | h max. | m | s |
---|---|---|---|---|
M6 | 14.2 | 7.3 | 5.7 | 10 |
M8 | 17.9 | 9.4 | 7.6 | 13 |
M10 | 21.8 | 11.4 | 9.6 | 15 |
M12 | 26 | 13.8 | 11.6 | 18 |
M16 | 34.5 | 18.3 | 15.3 | 24 |
M20 | 42.8 | 22.4 | 18.9 | 30 |
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
Size | Weight |
---|---|
M12 | 23.3 |
M16 | 44.8 |
M20 | 73.9 |
M22 | 104 |
M24 | 155 |
M27 | 224 |
M30 | 300 |
M36 | 515 |
DIN 555 hex nut - product drawing - d1=ID, m=Thickness, S=WAF, e=WAC
d1 | s | e | m |
---|---|---|---|
M5 | 8 | 8.63 | 4 |
M6 | 10 | 10.89 | 5 |
M8 | 13 | 14.2 | 6.5 |
M10 | 17 | 18.72 | 8 |
M12 | 19 | 20.88 | 10 |
M14 | 22 | 24.49 | 11 |
M16 | 24 | 26.17 | 13 |
M18 | 27 | 29.56 | 15 |
M20 | 30 | 32.95 | 16 |
M22 | 32 | 35.03 | 18 |
M24 | 36 | 39.55 | 19 |
M27 | 41 | 45.2 | 22 |
M30 | 46 | 50.85 | 24 |
M33 | 50 | 55.37 | 26 |
M36 | 55 | 60.79 | 29 |
M39 | 60 | 66.44 | 31 |
M42 | 65 | 71.3 | 34 |
M45 | 70 | 76.95 | 36 |
M48 | 75 | 82.06 | 38 |
M52 | 80 | 88.25 | 42 |
M56 | 85 | 93.56 | 45 |
M60 | 90 | 99.23 | 48 |
M64 | 95 | 104.86 | 51 |
din 555 - Hexagon Nuts, production class C
Equivalent norms: DIN 555; ISO 4034; CSN 21601; PN 82144; EU 24034
Legend: s - size of the hexagon e - the diameter of the circumscribed circle (not less than) m - height of the nut d - the nominal diameter of the thread | Makings: Steel: 05 Stainless: - Plastic: - Non Ferrous: - Thread: 7H |
Thread size d | M5 | M6 | M8 | M10 | M12 | M16 | M20 | (M22) | M24 | (M27) | M30 | (M33) | M36 | |
P | 0,8 | 1 | 1,25 | 1,5 | 1,75 | 2 | 2,5 | 2,5 | 3 | 3 | 3,5 | 3,5 | 4 | |
dw | min. | 6,7 | 8,7 | 11,5 | 15,5 | 17,2 | 22 | 22,7 | 29,5 | 33,2 | 38 | 42,7 | 46,5 | 51,1 |
e | min. | 8,63 | 10,89 | 14,2 | 18,72 | 20,88 | 26,17 | 32,95 | 35,03 | 39,55 | 45,2 | 50,85 | 55,37 | 60,79 |
m | nominal | 4 | 5 | 6,5 | 8 | 10 | 13 | 16 | 18 | 19 | 22 | 24 | 26 | 29 |
max. | 4,6 | 5,6 | 7,25 | 8,75 | 10,75 | 13,9 | 16,9 | 18,9 | 20,05 | 23,05 | 25,05 | 27,05 | 30,05 | |
min. | 3,4 | 4,4 | 5,75 | 7,25 | 9,25 | 12,1 | 15,1 | 17,1 | 17,95 | 20,95 | 22,95 | 24,95 | 27,95 | |
m | min. | 2,7 | 3,5 | 4,6 | 5,8 | 7,4 | 9,7 | 12,1 | 13,7 | 14,4 | 16,8 | 18,4 | 20 | 23,8 |
s | nominal = max. | 8 | 10 | 13 | 17 | 19 | 24 | 30 | 32 | 36 | 41 | 46 | 50 | 60 |
min. | 7,64 | 9,64 | 12,57 | 16,57 | 18,48 | 23,16 | 29,16 | 31 | 35 | 40 | 45 | 49 | 58,8 | |
Thread size d | (M39) | M42 | (M45) | M48 | (M52) | M56 | (M60) | M64 | M72x6 | M80x6 | M90x6 | M100x6 | ||
P | 4 | 4,5 | 4,5 | 5 | 5 | 5,5 | 6 | 6 | 6 | 6 | 6 | 6 | ||
dw | min. | 55,9 | 59,9 | 64,7 | 69,4 | 74,2 | 78,7 | 83,4 | 88,2 | 97,7 | 107,2 | 121,1 | 135,4 | |
e | min. | 66,44 | 71,3 | 76,95 | 82,6 | 88,25 | 93,56 | 99,23 | 104,86 | 116,16 | 127,46 | 144,08 | 161,02 | |
m | nominal | 31 | 34 | 36 | 38 | 42 | 45 | 48 | 51 | 58 | 64 | 72 | 80 | |
max. | 32,25 | 35,25 | 37,25 | 39,25 | 43,25 | 46,25 | 49,25 | 52,5 | 59,5 | 65,5 | 73,5 | 81,5 | ||
min. | 29,75 | 32,75 | 34,75 | 36,75 | 40,75 | 43,75 | 46,75 | 49,5 | 56,5 | 62,5 | 70,5 | 78,5 | ||
m´ | min. | 23,8 | 26,2 | 27,8 | 29,4 | 32,6 | 35 | 37,4 | 39,6 | 45,2 | 50 | 56,4 | 62,8 | |
s | nominal = max. | 60 | 65 | 70 | 75 | 80 | 85 | 90 | 95 | 105 | 115 | 130 | 145 | |
min. | 58,8 | 63,1 | 68,1 | 73,1 | 78,1 | 82,8 | 87,8 | 82,8 | 102,8 | 112,8 | 127,5 | 142,5 |
d | d1 | s | m |
---|---|---|---|
M5 | 11.2 | 8 | 4.3 |
M6 | 14.2 | 10 | 5.5 |
M8 | 18.2 | 13 | 7 |
M10 | 21 | 15 | 8.5 |
M12 | 24 | 17 | 10 |
M16 | 31 | 22 | 14 |
DIN 196 Nut Dimensions, DIN 196 Nuts Weight Chart & Material Specification & Tolerances / DIN 196 Nuts Manufacturer & Suppliers Mumbai, India
d | d1 | s | m |
---|---|---|---|
M5 | 11.2 | 8 | 4.3 |
M6 | 14.25 | 10 | 5.5 |
M8 | 18.25 | 13 | 7 |
M10 | 21 | 15 | 7.9 |
M12 | 24 | 17 | 8.7 |
M16 | 31 | 22 | 11.5 |
DIN 431 Nut Dimensions, DIN 431 Nuts Weight Chart & Material Specification & Tolerances / DIN 431 Nuts Manufacturer & Suppliers Mumbai, India
d1 | s | e | m min. |
---|---|---|---|
G 1/8 | 19 | 20.88 | 6 |
G 1/4 | 22 | 23.91 | 6 |
G 3/8 | 27 | 29.56 | 7 |
G 1/2 | 32 | 35.03 | 8 |
G 5/8 | 32 | 35.04 | 8 |
G 3/4 | 36 | 39.55 | 9 |
G 1 | 46 | 50.85 | 10 |
G 1-1/8 | 50 | 55.37 | 10 |
G 1-1/4 | 55 | 60.79 | 11 |
G 1-1/2 | 60 | 66.44 | 12 |
G 1-3/4 | 70 | 76.93 | 13 |
G 2 | 75 | 82.80 | 13 |
d1 | d3 | d2 max. | h max. | k max. |
---|---|---|---|---|
M3 | 12 | 6 | 7.5 | 2.5 |
M4 | 16 | 8 | 9.5 | 3.5 |
M5 | 20 | 10 | 11.5 | 4 |
M6 | 24 | 12 | 15 | 5 |
M8 | 30 | 16 | 18 | 6 |
M10 | 36 | 20 | 23 | 8 |
d1 | d3 | d2 max. | h max. | k max |
---|---|---|---|---|
M3 | 12 | 6 | 3 | 2.5 |
M4 | 16 | 8 | 4 | 3.5 |
M5 | 20 | 10 | 5 | 4 |
M6 | 24 | 12 | 6 | 5 |
M8 | 30 | 16 | 8 | 6 |
M10 | 36 | 20 | 10 | 8 |
d1 | s | e | m |
---|---|---|---|
M3 | 5.5 | 7 | 1.8 |
M4 | 7 | 8.9 | 2.2 |
M5 | 8 | 10.2 | 2.7 |
M6 | 10 | 12.7 | 3.2 |
M8 | 13 | 16.5 | 4 |
M10 | 17 | 21.5 | 5 |
Dimension | strength | Norm | Finish | Packaging |
---|---|---|---|---|
M2 | DIN 562 | BZP | 200 | |
M2 | DIN 562 | A2 | 500 | |
M2,5 | DIN 562 | BZP | 200 | |
M2,5 | DIN 562 | A2 | 500 | |
M3 | 4 | DIN 562 | BZP | 200 |
M3 | DIN 562 | A2 | 500 | |
M3 | DIN 562 | A4 | 500 | |
M3,5 | 4 | DIN 562 | BZP | 200 |
M4 | 4 | DIN 562 | BZP | 1000 |
M4 | DIN 562 | A2 | 500 |
DIN 562 - Square thin nuts
Equivalent norms: PN 82151; UNI 5596
Legend: d1 - the nominal diameter of the thread e - the diameter of the circumscribed circle (not less than) m - height of the nut s - size square | Makings: Steel: 04 Stainless: A2 Plastic: - Non Ferrous: Brass Thread: 6H |
d | m min. | s |
M2 | 1,2 | 4 |
M2,5 | 1,4 | 5 |
M3 | 1,6 | 5,5 |
M4 | 1,8 | 7 |
M5 | 2,3 | 8 |
M6 | 2,72 | 10 |
M8 | 3,52 | 13 |
M10 | 4,52 | 17 |
d1 | h | d2 | n |
---|---|---|---|
M8 x 1 | 5 | 20 | 4 |
M10 x 1 | 6 | 25 | 5 |
M12 x 1.5 | 6 | 28 | 5 |
M14 x 1.5 | 7 | 30 | 5 |
M16 x 1.5 | 7 | 32 | 5 |
M18 x 1.5 | 8 | 34 | 6 |
M20 x 1.5 | 8 | 36 | 6 |
M22 x 1.5 | 9 | 40 | 6 |
M24 x 1.5 | 9 | 42 | 6 |
M26 x 1.5 | 10 | 45 | 7 |
M28 x 1.5 | 10 | 50 | 7 |
M30 x 1.5 | 10 | 50 | 7 |
M32 x 1.5 | 11 | 52 | 7 |
M35 x 1.5 | 11 | 55 | 7 |
M38 x 1.5 | 11 | 58 | 8 |
M40 x 1.5 | 12 | 62 | 8 |
M42 x 1.5 | 12 | 62 | 8 |
M45 x 1.5 | 12 | 68 | 8 |
M48 x 1.5 | 13 | 75 | 8 |
M50 x 1.5 | 13 | 75 | 8 |
M52 x 1.5 | 13 | 80 | 10 |
M55 x 1.5 | 13 | 80 | 10 |
M58 x 1.5 | 13 | 90 | 10 |
M60 x 1.5 | 13 | 90 | 10 |
M62 x 1.5 | 14 | 95 | 10 |
M65 x 1.5 | 14 | 95 | 10 |
M68 x 1.5 | 14 | 100 | 10 |
M70 x 1.5 | 14 | 100 | 10 |
M72 x 1.5 | 14 | 110 | 10 |
M75 x 1.5 | 14 | 110 | 10 |
For Screws and Nut Threads
Limits of Sizes for Bolt & Nut Threads
Reference No.: ISO 965/1-1980, ISO 965/2-1980 | |
COARSE AND FINE THREAD SERIESTOLERANCE DESIGNATION | |
BOLT THREADS6 h for sizes up to M 1, 4 6 g for sizes M 1, 6 and larger | NUT THREADS5 H for sizes upto M 1, 4 6 H for sizes M 1, 6 and larger |
Note : Tolerances apply to the threads before coating. After coating the actual thread profile shall not exceed the maximum tolerance H or h limits. Thin (electroplate-type) coating may be acceptable. |
Thread Size in mm | Engagement Length | Major Diameter(d) | Pitch Diameter(d2) | |||
---|---|---|---|---|---|---|
from | to | max. | min. | max. | min. | |
M1 | 0,6 | 1,7 | 1,000 | 0,933 | 0,838 | 0,785 |
M1.2 | 0,6 | 1,7 | 1,200 | 1,133 | 0,938 | 0,885 |
M1.4 | 0, 7 | 2 | 1,400 | 1,325 | 1,205 | 1,149 |
M1.6 | 0, 8 | 2, 6 | 1,581 | 1,496 | 1,354 | 1,291 |
M1.8 | 0, 8 | 2, 6 | 1,781 | 1,696 | 1,554 | 1,491 |
M2 | 1 | 3 | 1,981 | 1,886 | 1,721 | 1,654 |
M2.5 | 1, 3 | 3, 8 | 2,480 | 2,380 | 1,888 | 1,817 |
M3 | 1, 5 | 4, 5 | 2,980 | 2,874 | 2,655 | 2,580 |
M3.5 | 1, 7 | 5 | 3,479 | 3,354 | 3,089 | 3,004` |
M4 | 2 | 6 | 3,978 | 3,838 | 3,523 | 3,433 |
M5 | 2, 5 | 7, 5 | 4,976 | 4,826 | 4,456 | 4,361 |
M6 | 3 | 9 | 5,974 | 5,794 | 5,324 | 5,212 |
M7 | 3 | 3 | 6,974 | 6,794 | 6,324 | 6,212 |
M8 | 4 | 12 | 7,972 | 7,760 | 7,160 | 7,042 |
M10 | 5 | 15 | 9,968 | 9,732 | 8,994 | 8,862 |
M12 | 6 | 18 | 11,966 | 11,701 | 10,829 | 10,679 |
M14 | 8 | 24 | 13,962 | 13,682 | 12,663 | 12,503 |
M16 | 8 | 24 | 15,962 | 15,682 | 14,663 | 14,503 |
M18 | 10 | 30 | 17,958 | 17,623 | 16,334 | 16,164 |
M20 | 10 | 30 | 19,958 | 19,623 | 18,334 | 18,164 |
M22 | 10 | 30 | 21,958 | 21,623 | 20,334 | 20,164 |
M24 | 12 | 36 | 23,952 | 23,577 | 22,003 | 21,803 |
M27 | 12 | 36 | 26,952 | 26,577 | 25,003 | 24,803 |
M30 | 15 | 45 | 29,947 | 29,522 | 27,674 | 27,462 |
M33 | 15 | 45 | 32,947 | 32,522 | 30,674 | 30,462 |
M36 | 18 | 53 | 35,940 | 35,465 | 33,342 | 33,118 |
M39 | 18 | 53 | 38,940 | 38,465 | 36,342 | 36,118 |
Thread Size in mm | Length of Thread engagement | MAJOR DIAMETER | PITCH DIAMETER | |||
---|---|---|---|---|---|---|
over | up to and incl. | max. | min. | max. | min. | |
M8x1 | 3 | 9 | 7,974 | 7,794 | 7,324 | 7,212 |
M10x1.25 | 4 | 12 | 9,972 | 9,760 | 9,160 | 9,042 |
M12x1.25 | 4, 5 | 13 | 11,972 | 11,760 | 11,160 | 11,028 |
M14x1.5 | 5, 6 | 16 | 13,968 | 13,732 | 12,994 | 12,854 |
M16x1.5 | 5, 6 | 16 | 15,968 | 15,732 | 14,994 | 14,854 |
M18x1.5 | 5, 6 | 16 | 17,968 | 17,762 | 16,994 | 16,854 |
M20x1.5 | 5, 6 | 16 | 19,968 | 19,732 | 18,994 | 18,854 |
M22x1.5 | 5, 6 | 16 | 21,968 | 21,732 | 20,994 | 20,854 |
M24x2 | 8, 5 | 25 | 23,962 | 23,682 | 22,663 | 22,493 |
M27x2 | 8, 5 | 25 | 26,962 | 26,682 | 25,663 | 25,493 |
M30x2 | 8, 5 | 25 | 29,962 | 29,682 | 28,663 | 28,493 |
M33x2 | 8, 5 | 25 | 32,962 | 32,682 | 31,663 | 31,493 |
M36x3 | 12 | 36 | 35,952 | 35,577 | 34,003 | 33,803 |
M39x3 | 12 | 36 | 38,952 | 38,577 | 37,003 | 36,803 |
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
Size | Weight |
---|---|
M3 | 0.78 |
M4 | 1.13 |
M5 | 1.73 |
M6 | 2.50 |
M7 | 3.24 |
M8 | 5.27 |
M10 | 9.58 |
M12 | 13.70 |
M14 | 21.30 |
M16 | 28.50 |
Weight in kgs. per 1,000 pcs. unless otherwise specified. All weights are approximations.
Size | Weight |
---|---|
M3 | 0.5 |
M4 | 1.0 |
M5 | 1.4 |
M6 | 2.4 |
M7 | 3.0 |
M8 | 5.1 |
M10 | 10.6 |
M12 | 17.2 |
M14 | 26 |
M16 | 34 |
M18 | 45 |
M20 | 65 |
M22 | 75 |
M24 | 100 |
M27 | 162 |
M30 | 212 |
M33 | 317 |
M36 | 415 |
M39 | 499 |
M42 | 628 |
M45 | 771 |
M48 | 998 |
If you don’t see what you’re looking for just call one of our team members at +91-22-6659 5285 Or Mail Us inquiry@raajsagarsteels.com. No inquiry is too large or too small, we specialize in locating hard to find items. If you do see what you are looking, we would love to assist you and give you a quote today!
24 Hrs. Online Whatsapp Number Contact Person: Mr. Milap Mehta - Cell: +91-9869 532 584